Operating Manual
24
9 HF frequency None
10 Mode of use
Connuous operaon
11 Construction Portable device
12 Protection class II
13 Application part Type B
14 Type of moisture protection Covered device
15 Fuse between the primary and sec-
ondary power supplies
Omnium1 Type BI20-180100-I power supply
16 Initial voltage at the applicator box Max. 20 V direct current
17 Boxes for connection with the Omni-
Mat, OmniPad and OmniSpot
M12, 5-pin
18 Case V0
19 Magnetic eld strength at the highest
intensity level (400%)
< 120 µT
20 Duration of use, selectable (using
automatic deactivation)
1-60 minutes
21 Weight 616 g
22 External dimensions 167 mm x 60 mm x 27 mm
23 Temperature (in use) +10°C bis +40°C
24 Temperature (stored) -20°C bis +45°C
25 Air humidity (in use) 30% - 75% RH (without condensation)
26 Air humidity (stored) 10% - 95% RH (without condensation)
27 Air pressure (in use) 700 - 1060 hPa
28 Air pressure (stored) 700 - 1060 hPa
29 Operation Frequency 2412MHz-2472MHz (for Europe)
30 Max. RF Output Power 15.98dBm (for Europe)
Omnium1 Power Supply
1 Type BI22-180120-I
2 Power supply 100 V - 240 V~ / 50 Hz - 60 Hz / 800 mA
3 Output DC 18V 1,2A
4 Cable length 1,55 m
OmniMat Full Body Applicator
1 Coils 3 pairs of solid, uninsulated coils, copper
2 Covering Articial leather, disinfectable, foldable into 3
layers, do not roll or bend
3 Dimensions 170 x 58 x 2 cm
4 Cable length 2 m
OmniPad Pillow Applicator
1 Coils 1 pair of solid coils, copper