OMRON AUTOMOTIVE ELECTRONICS KOREA OKA-620R RECEIVER, RF Keyless Entry System
Table of contents 1. Constitution of the Radio Frequency Keyless Entry system Controller for vehicle --- 1 2. User's manual (provisionally) ----------------------------------------------------------------- 2 3. Specification ------------------------------------------------------------------------------------- 3 4. Features ------------------------------------------------------------------------------------------- 4 5.
1. Constitution of the Radio Frequency Keyless Entry System for vehicle The radio frequency keyless entry is a system that it controls locking and unlocking the door and alarm the horn by wireless remote controller. This system consists of three components. The TRANSMITTER is a device that transmits the signal when the button is pressed. The transmission signal consists of several synchronous codes, unique identification code, security code and function code. The RECEIVER is fixed inside the vehicle.
2. User's manual (provisionally) REMOTE TRANSMITTER You can lock and unlock and alarm the horn your vehicle with the remote transmitter. LOCK When you push the LOCK button, all the doors will lock. You cannot lock any of the doors with the remote transmitter if any door is open or the key is the ignition switch. UNLOCK When you push the UNLOCK button, all the doors will unlock. You cannot unlock any of the doors with the remote transmitter if any door is open or the key is in the ignition switch.
3. Specification 3.1 CPU Type uPD789104AMC (8bit) Manufacturer : NEC ROM 8k x 8 bit RAM 256 bytes Clock frequency 4.19MHz Clock frequency generation CRYSTAL resonator Package 30pin SSOP 3.2 EEPROM Type S-93C46XXX Manufacturer: Seiko. Elec. Memory 1Kbit Package 8pin SOP 3.3 RF Receiver Module Type G8X-28RXIAM26 Manufacturer: OMRON Elec. Local clock frequency 313.
4.Features 4.1 Transmission frame The transmission begins immediately in case of LOCK and UNLOCK and PANIC button is pressed. The transmission frame consists of the synchronous frame and the data frame. The synchronous frame has 30 synchronous codes that it will be used for the receiver to wake up. The data frame consists of 24bit length identification code, 16bit security code and function code. 16million different identification codes are available.