Datasheet

1
2JCIE-BU
Environment Sensor (USB Type)
Sense a variety of environmental
information
• Connects to a network via USB or Bluetooth
®
to enable the
sending of measurement data
• Using OMRON’s unique and innovative algorithm, enables
highly accurate determination of earthquakes based on vibra-
tional acceleration
• Enables continuous monitoring of room air quality using a VOC
sensor
Ordering Information
Specifications
Ratings
Characteristics
*1. 3-axis acceleration values can only be obtained in the specified operation mode. For details, refer to the Communication Interface Manual.
*2. eTVOC (equivalent Total Volatile Organic Compounds) refers to the total concentration of volatile organic compounds in a room environment. Output TVOC values
will be higher or lower depending on the type of volatile organic compound. Also, if continuously operated in high-temperature and high-humidity environments,
sensitivity for eTVOC values may decrease.
*3. Information for heat stroke and discomfort index are only guidelines to be used for air conditioning and physical condition management. An individual difference
and physical condition will greatly affect an individual feeling. Sensor output is not to be used for determining the presence of symptoms. Use only as a guideline.
Warning levels for heat stroke may not be the same as those issued by public institutions.
*4. SI (Spectral Intensity) values corresponds to the destructive energy seismic motions exert on a structure.
*5. The Bluetooth
®
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by OMRON Corporation is under license.
*6. Communication distance may vary according to obstacles between the communication equipment, radio wave conditions.
*7. Performance values are obtained based on the various conditions of individual tests, and do not guarantee the values obtained under combined conditions for rated
values and performance values.
*8. Reference output values are provided for reference only, and do not guarantee that operation will always take place normally within that range.
RoHS compliant
Refer to Safety Precautions on page 3.
Model Communication Interface Output data
Minimum packing unit
(Unit: pcs)
2JCIE-BU01
Bluetooth
®
low energy
USB communication
Temperature, Humidity, Light, Barometric pressure, Sound noise,
3-axis acceleration *1, eTVOC *2, Discomfort index *3, Heat stroke warning level *3,
Vibration information *1 (No. of earthquakes, No. of vibrations, SI value *4)
1
Item Specification
Power Supply 5 V (USB power supply)
Sensors Temperature, Humidity, Light, Barometric pressure, Sound noise, 3-axis acceleration *1, eTVOC *2
Interface Bluetooth
®
low energy (Bluetooth
®
v5.0)*5, USB communication (USB2.0)
Communication range Approx. 10 m *6
Operating Temperature −10 to 60°C
Operating Humidity 30 to 85%RH
Dimensions Approx. 29.1 × 14.9 × 7.0 mm
Weight Approx. 2.9 g
Absolute maximum ratings Power supply −0.3 to 5.5 V
Absolute maximum ratings Output current Max. 100 mA
Absolute maximum ratings Temperature −20 to 70°C
Recommended operating condition Power supply 4.75 to 5.25 V
Item Measurable range Accuracy (Vcc = 5.0 V, Ta = 15 to 35°C if not specified) *7
Temperature −10 to 60°C ±2°C
Humidity 0 to 100%RH ±5%RH
Light 10 to 2000 lx ±100 lx
Barometric pressure 700 to 1100 hPa ±4 hPa
Sound noise 40 to 94 dB For reference *8
3-axis acceleration −2000 to 2000 mg For reference *1, *8
eTVOC 0 to 32768 ppb For reference *2, *8