Datasheet

3
2JCIE-BU Environment Sensor (USB Type)
Safety Precautions
To assure the correct use of the product basic safety measures
should always be followed including the warnings and cautions
listed in this document.
Warning: Improper use may result in death or serious injury.
• In places where radio communications are prohibited, turn off
the Bluetooth
®
.
• Do not place the unit closer than 22cm (9 inches) from
implantable medical devices such as pacemakers.
• Keep the unit out of the reach of young children.
If young children swallow any small piece, immediately consult
a doctor.
• Please stop using the unit immediately, if there is strange
smell or smoke from the unit.
• Do not subject the unit to extreme temperatures, humidity,
moisture, or direct sunlight.
• Internal condensation due to severe change in temperature
may cause malfunction.
Caution: Improper use may result in minor or moderate injury to the user or
damage to the equipment.
* Property damage refers to damage related to houses and household belong-
ings, as well as domestic animals and pets.
• Do not use the unit in the field of strong electromagnetic
waves and static electricity.
• Please read the instruction manual of your smartphone or tab-
let for the wireless communication.
• This unit is not a measurement instrument.
The measured values must be treated as a reference, and do
not use it for the purpose of verification or diagnosis.
• Do not disconnect the unit from the connected device during
USB communication. Doing so may cause failure or data loss.
• Do not forcefully grip the unit or handle it in a reckless manner.
Doing so may cause the unit to be damaged or may cause
injury.
• Do not use this product with its vent holes (both sides) and
window covered. This will prevent accurate measured values
from being obtained.
• Do not disassemble or modify the unit.
• Do not subject the unit to strong shocks or vibrations, drop it,
step on it.
• As this is a precision instrument, do not pull forcefully on its
mounting portion or subject it to stress such as twisting, bend-
ing, or shock. Doing so may cause failure or deterioration.
• Do not immerse the unit or any of the components in water.
The unit is not waterproof. Do not wash it or touch it with wet
hands. Be careful that water does not get into the unit.
• Depending on the surrounding environment and the mounting
position, the measured characteristic may vary. The measured
values must be treated as a reference.
(1) Do not subject the unit to extreme temperatures, humidity,
moisture, or direct sunlight.
(2) Do not use the unit where it will be exposed to dew con-
densation.
(3) Do not subject the unit to water, oil or chemical materials.
(4) Do not use the unit where it will be exposed to flammable
gas or corrosive vapors.
(5) Do not use the unit where it will be exposed to dust, saline
matter or iron powder.
(6) Install in a location as far away from heat-generating
instruments, etc., as possible.
• This Product operates in the unlicensed ISM band at 2.4GHz.
In case this Product is used around the other wireless devices
including microwave and wireless LAN, which operate same
frequency band of this Product, there is a possibility that inter-
ference occurs between this Product and such other devices.
If such interference occurs, please stop the operation of other
devices or relocate this Product before using this Product or
do not use this Product around the other wireless devices.
• Due to the use of radio waves, third parties may intercept
transmissions either deliberately or accidentally. Do not use
this Product for matters related to vital secrets or human lives.
• This product is designed and manufactured as a general-pur-
pose item for general industrial products. Usage for the follow-
ing applications is not intended and OMRON shall not provide
any warranty for this product if customers in fact use this prod-
uct for such applications.
(a) Applications requiring high levels of safety (Ex. Nuclear
control equipment, combustion equipment, aviation/space
equipment, railroad equipment, lift equipment, amusement
park machinery, medical instruments, safety devices, and
other applications that may cause the loss of life or injury)
(b) Applications requiring high reliability (Ex. Gas/water/elec-
tricity supply systems, systems that operate continuously
for 24 hours, applications regarding rights and assets such
as payment systems, etc.)
(c) Applications in severe conditions or environments (Ex.
Equipment installed outdoors, equipment subjected to
chemical contamination, equipment subjected to electro-
magnetic interference, equipment subjected to vibration
and shock, equipment operated continuously for long
period of time, etc.)
(d) Applications in conditions or environments not listed in
these specifications
• In addition to the contents of (a) through (d) above, this prod-
uct is also not designed for use with automobiles (including
two-wheel vehicles, the same applies hereinafter). Do not use
for applications where mounted on automobiles. Ask your
OMRON representative for details regarding products for
mounting on automobiles.
Warning
Caution
Precautions for Correct Use