Datasheet

2JCIE-EV
9
Safety Precautions
Precautions for safe use
Read the following to ensure safe use.
The safety precautions that are provided are extremely important to
safety. Always read and heed the information provided in all safety
precautions.
Explanation of safety symbols
• Do not incorporate this product in a product, regardless of the
application.
• This product is not a measuring instrument. Do not use for
purposes such as sensor output value measurement and
diagnosis.
• When disposing of the product, follow local rules and regulations.
• Keep out of the hands of small children when using and storing the
product. If a small part is swallowed, immediately consult a
physician.
• If you notice a strange odor or smoke coming from the product, or
other abnormal condition, immediately shut off the power and
consult your dealer.
• Do not handle this product with your bare hands. Risk of minor
injury from the packaging box and edge of the board.
• Do not connect the indicated terminals or power not listed in this
manual. Check the rating of each terminal, and do not use a current
or voltage that exceeds the rating.
• This product is not waterproof. Do not use in an environment where
water, oil, or chemicals may splash on the product. Do not wash
with water or by ultrasound, and do not touch with wet hands.
• Do use an air blower. This may damage the sensor.
• Do not disassemble or modify the product.
• Do not grasp the product with excessive force, swing it around, or
treat it roughly. Risk of product failure and injury.
• Do not use in an environment where corrosive, flammable, or
explosive gases are present.
• Treat the measured values acquired by this product as reference
values.
• Do not connect this product to other than one of the models listed
in each table of platform supporting models.
• The pin headers and sockets below are recommended for this
product. For insertion/removal counts, refer to the latest data sheet /
reliability test results for each pin header or socket.
2JCIE-EV01-RP1: ESQ-120-12-L-D
2JCIE-EV01-AR1: TSW-114-07-L-S
2JCIE-EV01-FT1: ESQ-112-12-L-S
ESQ-116-12-L-S
• When this product is connected to any of the platforms, heat and
other effects from the platform will cause the output of the product
to change. Check these effects sufficiently before using the
product
• Check, understand, and consider the installation location of each
sensor before using the product. Do not use with the area around
each sensor in a sealed state.
• This is a precision product. Exercise caution when handling.
Dropping the packing box or the unit, or subjecting the unit and its
terminals to intense shock may result in product failure.
• Do not use or store the product in a high-temperature or high-
humidity location, a location exposed to long hours of direct
sunlight, or in a vehicle. Sudden changes of ambient temperature
may cause internal condensation that results in malfunctioning.
• Do not use or store in a location with dust, salt, or iron powder. Dust
or other contaminants may collect in or on the product and cause
failure.
• Do not use in a location with intense static electricity or
electromagnetic waves. Risk of product failure.
CAUTION
Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury, or property damage.
Precautions for
Safe Use
Precautions on what to do and what not to
do to ensure safe usage of the product.
Precautions for
Correct Use
Precautions on what to do and what not to
do to ensure proper operation and
performance.
CAUTION
Precautions for Correct Use
Precautions for Correct Use