Datasheet

737
Text
736
Text DIP Switch – A6E/A6ER
Low-cost DIP Switch
■
ROHS compliant.
■
The sealed bottom prevents flux penetration.
■
A variety of models with short or long
actuators (levers) available.
Ordering Information
Type Flat actuator Raised actuator Type Side actuator Side actuator
(striker color) (Yellow) (Yellow) (short-lever) (Yellow) (long-lever) (Yellow)
DIP Terminal DIP Terminal DIP Terminal DIP Terminal
No. Quantity Quantity
of poles per stick per stick
2 73 A6E-2101 A6E-2104 70 A6ER-2101 A6ER-2104
3 52 A6E-3101 A6E-3104 50 A6ER-3101 A6ER-3104
4 40 A6E-4101 A6E-4104 39 A6ER-4101 A6ER-4104
5 33 A6E-5101 A6E-5104 32 A6ER-5101 A6ER-5104
6 28 A6E-6101 A6E-6104 27 A6ER-6101 A6ER-6104
7 24 A6E-7101 A6E-7104 24 A6ER-7101 A6ER-7104
8 21 A6E-8101 A6E-8104 21 A6ER-8101 A6ER-8104
9 19 A6E-9101 A6E-9104 19 A6ER-9101 A6ER-9104
10 17 A6E-0101 A6E-0104 17 A6ER-0101 A6ER-0104
■
Rating/Characteristics
Switching capacity 25 mA at 24 VDC,
10 µA (minimum current) at 3.5 VDC
Ambient temperature Operating: -20°C to 70°C, at 60% maximum (with no icing)
Ambient humidity Operating: 35% to 90% (for +5°C to 35°C)
Insulation resistance 100 MΩ min. (at 250 VDC)
Contact resistance 200 mΩ max. (initial value)
Dielectric strength 500 VAC for 1 min between terminals of the same polarity, and between terminals of
different polarity
Vibration resistance Malfunction: 10 to 55 Hz, 1.5-mm double amplitude
Shock resistance Malfunction: 300 m/s2 min.
Life expectancy Mechanical: 1,000 operations min.
Electrical: 1,000 operations min.
Operating force 0.29 N min. {30 gf}
Weight A6E: 0.66 g (2 poles), 1.00 g (4 poles), 1.32 g (6 poles), 1.65 g (8 poles),
1.98 g (10 poles)
A6ER: 1.01 g (2 poles), 1.51 g (4 poles), 2.00 g (6 poles), 2.51 g (8 poles),
3.02 g (10 poles)
Specifications
DIP Switches
Note : Orders must be made in multiples of pack quantity. Switches are not sold individually.
DIP Switch (Slide Type) – A6D/A6DR
ALL DIMENSIONS SHOWN ARE IN MILLIMETRES.
To convert millimetres into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Mounting holes (top view)
Internal connections (top view)
2.54×(P−1)
0.8 dia. (min.) holes
(0.9 dia. for automatic insertion)
(Single-sided PCB, t=1.2 to 1.6)
7.62±
0.1
P: Pole numbers
ON
12 910
Installation
■
Internal Connections (Top View)
CAT. No. A052-E2-04A
Omron 08 Cat 565-773 5/10/07 15:58 Page 736