Datasheet

ManualsBrandsOmron Electronic Components ManualsSwitchesTactile Switch B3SL, 1NO, 1.96N, 6.5 x 7mm

B3SL Middle Stroke Tactile Switch

Surface-mounting Sealed Tactile Switch.

Middle Stroke and Crisp Clicking Action.

■ RoHS compliant.

■ Sealed construction conforming to IP67 (IEC

60529) provides high contact reliability in dusty

environments. (* Excluding the terminal section.)

■ Crisp click feeling and middle stroke with rubber

plunger.

■ Tape packing is available.

Ordering Information

Note: Orders must be made in multiples of the minimum order. Switches are not sold individually.

Ratings/Characteristics

RoHS Compliant

(Refer to page 3 for details.)

Type Plunger Height Operating force (OF) Embossed tape

Model Minimum order

6 × 6 mm

B3SL Series

(Flat type)

3.4 mm 1.96 N {200 gf} B3SL-1002P 2,000

(Flat type)

5.1 mm B3SL-1022P 1,400

Item B3SL-1002P B3SL-1022P

Switching capacity 1 to 50 mA at 5 to 12 VDC (resistive load)

Ambient operating temperature −25 to 90°C at 60% max. (with no icing or condensation)

Ambient operating humidity 35% to 85% (at 5 to 35°C)

Contact configuration SPST-NO

Contact resistance 100 mΩ max. (initial value) (for 1 mA at 5 VDC)

Insulation resistance 100 MΩ min. (at 250 VDC)

Dielectric strength 250 VAC, 50/60 Hz for 1 min

Bounce time 5 ms max.

Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude

Shock resistance Destruction: 1,000 m/s

{approx. 100 G} max.

Durability 100,000 operations min.

Operating force 30 N max.

Summary of content (4 pages)

PAGE 1
Middle Stroke Tactile Switch B3SL Surface-mounting Sealed Tactile Switch. Middle Stroke and Crisp Clicking Action. ■ RoHS compliant. ■ Sealed construction conforming to IP67 (IEC 60529) provides high contact reliability in dusty environments. (* Excluding the terminal section.) ■ Crisp click feeling and middle stroke with rubber plunger. ■ Tape packing is available. RoHS Compliant (Refer to page 3 for details.
PAGE 2
B3SL B3SL Operating Characteristics Operation type B3SL-1002P B3SL-1022P Item 1.96 ± 0.49 N {200 ± 50 gf} Operating force (OF) Releasing force (RF) 0.35 N min. {35 gf} Pretravel (PT) 0.3 ± 0.2 mm 0.5 ± 0.2 mm Dimensions Note: All units are in millimeters unless otherwise indicated. B3SL-1002P 6.2 PCB Pad (Top View) 4±0.2 6.5 Terminal Arrangement/ Internal Connections (Top View) 2.5 dia. 6.5 3.4 3 2.5 1.2 0.7 7 0.1 4 3 2 1 5 3 8.5 B3SL-1022P 6.2 4±0.2 6.
PAGE 3
B3SL B3SL • Using the Switch in an outdoor environment where it is exposed to water drops for an extended period of time • Using the Switch in an underwater setting where it is subject to strong water pressure. Operation • Do not repeatedly operate the Switch with excessive force. Applying excessive pressure or applying additional force after the plunger has stopped may deform the disk spring of the Switch, resulting in malfunction.
PAGE 4
B3SL B3SL ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. A173-E1-01A In the interest of product improvement, specifications are subject to change without notice.