Datasheet

1
B3W-9 Illuminated Tactile Switches
Compact Illuminated Tactile Switch with
2 LEDs
■ Compact construction 10 × 10 × 11 mm (W × D ×
H) and 12 × 12 × 11 mm (W × D × H) with bright
and uniform illumination.
■ Three-color illumination (red LED + green LED =
orange).
■ Standard force (1.57 N) and high-force (2.26 N)
models.
Features
Model Number Structure
1. Cap width
0: 10 × 10 mm
1: 12 × 12 mm
2. Operating force
0: Standard (OF = 1.57 N)
2: High-force (OF = 2.26 N)
3. LED color
R: Red
G: Green
HG: Green (high brightness)
Y: Yellow
B: Blue
RG: Red + Green (Combination of LED colors)
RB: Red + Blue (Combination of LED colors)
4. No. of LEDs
1: 1
2: 2
5. Cap
R: Red
G: Green
Y: Yellow
B: Blue
C: Transparent
N: Milky white
Note: 1. There are five colored caps or a transparent cap for Switches with single-color LEDs. There are milky white or transparent caps
for Switches with two-color LEDs (combination of different-color LEDs).
2. For Switches with two LEDs, red and green, the red and green LEDs illuminated simultaneously become orange for use as a
three-color LED. A milky white cap is used.
RoHS Compliant
Bright and uniform illumination
•
Compact construction 10 × 10 × 11 mm
(W × D × H) and 12 × 12 × 11 mm (W × D
× H) equipped with 2 LEDs.
•
Uniquely constructed diffusion panel.
Three-color illumination
•
Simultaneous use of red and green
LEDs create a third color (orange).
Snap-action contact construction
for a positive click action.
•
Models available with two different
operating forces, standard force (1.57 N)
and high-force (2.26 N).
High contact reliability
•
Sealed construction provides high
contact reliability.
12 345
B3W-90@@-@@@