Datasheet

ManualsBrandsOmron Electronic Components ManualsMicroswitchesMicro Switch D2FD, 100mA, 100mA, 1CO, 0.65N, Simulated Roller Lever

D2FD

Dust Proof Ultra Subminiature Basic Switch

Ultra subminiature and dust

proof

• Sealing by using rubber packing means the switch

can be used in dust-proof environments (IEC IP6X).

• Switch rating of 2 A at 125 VAC possible with a

single-leaf movable spring. Models for micro loads

are also available.

• Solder and PCB terminals are available.

RoHS Compliant

Model Number Legend

List of Models

Contact Form

● SPDT

Ratings

2 A 0.1 A

Actuator Terminals

Pin plunger

Solder terminals D2FD-2L0-1H D2FD-01L0-1H

PCB terminals D2FD-2L0-1T D2FD-01L0-1T

Hinge lever

Solder terminals D2FD-2L1-1H D2FD-01L1-1H

PCB terminals D2FD-2L1-1T D2FD-01L1-1T

Simulated roller

lever (R2.5)

Solder terminals D2FD-2L30-1H D2FD-01L30-1H

PCB terminals D2FD-2L30-1T D2FD-01L30-1T

D2FD -

-1

12 3

1. Rating

2 : 2 A at 125 VAC / 30 VDC

01 : 0.1 A at 125 VAC / 30 VDC

2. Actuater

L0 : Pin plunger

L1 : Hinge lever

L30 : Simulated roller lever

3. Terminals

H : Solder terminals

T : PCB terminals

COM NO NC

Summary of content (5 pages)

PAGE 1
D2FD Dust Proof Ultra Subminiature Basic Switch Ultra subminiature and dust proof • Sealing by using rubber packing means the switch can be used in dust-proof environments (IEC IP6X). • Switch rating of 2 A at 125 VAC possible with a single-leaf movable spring. Models for micro loads are also available. • Solder and PCB terminals are available. RoHS Compliant Model Number Legend D2FD - @ @ - 1 @ 1 2 3 1. Rating 3. Terminals 2 : 2 A at 125 VAC / 30 VDC H : Solder terminals 01 : 0.
PAGE 2
D2FD Dust Proof Ultra Subminiature Basic Switch Contact Specifications Item Model D2FD-2 models D2FD-01 models Specification Contact Crossbar Material Silver alloy Gold alloy Gap (standard value) 0.25 mm Minimum applicable load (see note) 100 mA at 5 VDC 1 mA at 5 VDC Note: For more information on the minimum applicable load, refer to Using Micro Loads. Ratings D2FD-2 models Model Rated voltage D2FD-01 models Resistive load 125 VAC 2A 0.1 A 30 VDC 2A 0.
PAGE 3
D2FD Dust Proof Ultra Subminiature Basic Switch Dimensions (Unit: mm) / Operating Characteristics The following illustrations and drawings are for solder terminal models. PCB terminal models are omitted from the drawings. Refer to Terminals for these terminals. When ordering, replace @ with the code for the rating that you need. For the combination of models, refer to List of Models. ● Pin Plunger Models D2FD-@L0-1H D2FD-@L0-1T A +0.1 2.4 –0.05 ● Hinge Lever Models D2FD-@L1-1H D2FD-@L1-1T 2.5±0.
PAGE 4
D2FD Dust Proof Ultra Subminiature Basic Switch Precautions Refer to General Information. Cautions ● Degree of Protection ● Operating Body • Do not use the Switch under the environment where it is exposed to water. The degree of protection is IP6X and the protection against water is not defined. • Prevent the Switch from coming into contact with oil and chemicals.
PAGE 5
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product.