Datasheet

3
D2FD Dust Proof Ultra Subminiature Basic Switch
Dimensions (Unit: mm) / Operating Characteristics
The following illustrations and drawings are for solder terminal models. PCB terminal models are omitted from the drawings. Refer to Terminals for these terminals.
When ordering, replace @ with the code for the rating that you need. For the combination of models, refer to List of Models.
Note: 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
2. The operating characteristics are for operation in the A direction ( ).
PT
2.5
±0.1
2.4
+0.1
–0.05
1.2 Dia.
A
4.35
OP
6.5
±0.15
2.4 Dia.
+0.1
–0.05
● Pin Plunger Models
D2FD-@L0-1H
D2FD-@L0-1T
Model
D2FD-@L0-1H
D2FD-@L0-1T
OF max.
RF min.
2.00 N {204 gf}
0.25 N {25 gf}
PT max.
OT mix.
MD max.
0.6 mm
0.25 mm
0.12 mm
OP (-1H)
OP (-1T)
7.0 ± 0.2 mm
7.0 ± 0.3 mm
● Hinge Lever Models
D2FD-@L1-1H
D2FD-@L1-1T
Model
D2FD-@L1-1H
D2FD-@L1-1T
OF max.
RF min.
0.65 N {66 gf}
0.05 N {5 gf}
OT mix.
MD max.
0.5 mm
0.5 mm
FP max.
OP (-1H)
OP (-1T)
11.3 mm
8.3 ± 1.0 mm
8.3 ± 1.2 mm
t = 0.3 Stainless-steel lever
A
OP
FP
6.5
±0.15
3
5.25
● Simulated Roller Lever Models (R2.5)
D2FD-@L30-1H
D2FD-@L30-1T
Model D2FD-@L30-1H
D2FD-@L30-1T
OF max.
RF min.
0.65 N {66 gf}
0.05 N {5 gf}
OT mix.
MD max.
0.5 mm
0.5 mm
FP max.
OP (-1H)
OP (-1T)
14.3 mm
11.3 ± 1.0 mm
11.3 ± 1.2 mm
t = 0.3 Stainless-steel lever
R2.5
A
3
4.2
FP
OP
6.5
±0.15