Datasheet

ManualsBrandsOmron Electronic Components ManualsMicroswitchesMicro Switch D2QW, 100mA, 1NO, 1.5N, Pin Plunger

D2QW

Sealed Subminiature Basic Switch

Sealed long stroke

slide-contact switch for reliable

ON/OFF action even in severe

environmental conditions.

● Extra-long stroke even without levers. (OT: 2.7 mm)

● Clip contacts with highly reliable slide contact

mechanism.

● High temperature resistance up to 85°C and

drip-proof structure for wide range of applications

environmental resistance required.

(Conforms to IP67, except for terminal section.)

RoHS Compliant

Model Number Legend

D2QW-@@@@@- @ - @

1 2 3 4 5 6 7

1. Cover

C: M3-screw Mounting

2. Ratings

0: 5 VDC 1 mA~30 VDC 0.1 A

3. Actuator

0: Pin plunger

7: Simulated roller leaf lever

4. Contact form

3: SPST-NO

5. Terminals

D: Straight PCB terminals

H: Solder terminals

6. Special Product Number

Up to 3 numeric digits

7. Special Industry Compatibility

AQ: For automotive application

Summary of content (4 pages)

PAGE 1
D2QW Sealed Subminiature Basic Switch Sealed long stroke slide-contact switch for reliable ON/OFF action even in severe environmental conditions. D 2 Q W ● Extra-long stroke even without levers. (OT: 2.7 mm) ● Clip contacts with highly reliable slide contact mechanism. ● High temperature resistance up to 85°C and drip-proof structure for wide range of applications environmental resistance required. (Conforms to IP67, except for terminal section.
PAGE 2
D2QW Sealed Subminiature Basic Switch List of Models Actuator Contact form Model Pin plunger Straight PCB Terminals SPST-NO D2QW-C003D Solder SPST-NO D2QW-C003H Simulated Roller Lever Straight PCB SPST-NO D2QW-C073D Solder SPST-NO D2QW-C073H Contact form Characteristics D 2 ●SPST-NO Q W COM NO Permissible operating speed 1 mm to 500 m/s Permissible operating frequency 30 operations/min Insulation resistance 100 MΩ min.
PAGE 3
D2QW Sealed Subminiature Basic Switch Dimensions (Unit: mm) /Operating Characteristics The illustrations and drawings are for solder terminals models. Refer to "Terminals/Appearances" of the previous page for details on models with Straight PCB terminals. When ordering, replace @ with the code for the terminal that you need. ●Pin plunger D2QW-C003@ 8.3±0.1 1.7 dia. 8.2±0.2 (4) 5.3±0.2 OT FP OP TTP 0 .1 d 0 ± 3.2 5.1 3 +0.1 0 . .1 3−0 ia. dia 4.2 3 1.8 2-1.2 2-2 4.
PAGE 4
D2QW Sealed Subminiature Basic Switch Correct Use ●Mounting D 2 Q W • Turn OFF the power supply before mounting or removing the Switch, wiring, or performing maintenance or inspection. Failure to do so may result in electric shock or burning. • When mouting with screw, use M3 mounting screw with plane washers or spring washers to securely mount the Switch. Tighten the screws to a torque of 0.27 to 0.29 N·m {28 to 30 gf}.