Datasheet

ManualsBrandsOmron Electronic Components ManualsMicroswitchesMicro Switch D2SW, 100mA, 1CO, 0.59N, Hinge Roller Lever

D2SW

Sealed Subminiature Basic Switch

Sealed Subminiature Basic

Switch Conforming to IP67

(Excluding the terminals

on terminal models)

● Use of epoxy resin assures stable sealing,

making this switch ideal for places subject to

water spray or excessive dust.

● Ideal for automobiles, automatic vending

machines, refrigerators, ice-making equipment,

bath equipment, hot-water supply systems, air

conditioners, and industrial equipments, which

require high environmental resistance.

● UL, CSA, VDE safety standard approved models

are available.

RoHS Compliant

Model Number Legend

D2SW - @@@@@

1. Ratings

3 : 125 VAC 3 A

01 : 30 VDC 0.1 A

2. Actuator

None : Pin plunger

L1 : Hinge lever

L2 : Hinge roller lever

L3 : Simulated roller lever

3. Contact form

None : SPDT

-2 : SPST-NC (Molded lead wire models only)

-3 : SPST-NO (Molded lead wire models only)

4. Terminals

H, HS : Solder terminals

D, DS : Self-clinching PCB terminals

T, TS : Quick-connect terminals (#110)

M, MS : Molded lead wires

Note: UL/CSA approved versions are available.

In this case, HS, DS, TS, MS will be added to the end

of the model number.

UL/CSA approved models have UL approved wiring

(AWG22 UL1015).

Consult your OMRON sales representative for details.

5. Length of the molded lead wire

None : 300 mm

-0 : 1,000 mm

1 2 3 4 5

Summary of content (7 pages)

PAGE 1
D2SW Sealed Subminiature Basic Switch Sealed Subminiature Basic Switch Conforming to IP67 (Excluding the terminals on terminal models) D 2 S W ● Use of epoxy resin assures stable sealing, making this switch ideal for places subject to water spray or excessive dust. ● Ideal for automobiles, automatic vending machines, refrigerators, ice-making equipment, bath equipment, hot-water supply systems, air conditioners, and industrial equipments, which require high environmental resistance.
PAGE 2
D2SW Sealed Subminiature Basic Switch List of Models Ratings Actuator Terminals 3A Contact form D2SW-3H Solder terminals Quick-connect terminals (#110) SPDT PCB terminals Pin plunger SPDT Molded lead wire terminals (300 mm) Molded lead wire terminals (1,000 mm) D 2 S W 0.
PAGE 3
D2SW Sealed Subminiature Basic Switch Contact Specifications Item Model Contact Characteristics D2SW-3 models D2SW-01 models Specification Rivet Crossbar Permissible operating speed Material Silver Gold alloy Permissible operating frequency Insulation resistance Gap (standard value) Inrush current NC 20 A max. 1 A max. NO 10 A max. 1 A max. 160 mA at 5 VDC 1 mA at 5 VDC Minimum applicable load (reference value) * * 0.
PAGE 4
D2SW Sealed Subminiature Basic Switch Mounting Holes (Unit: mm) 2-2.4 dia. mounting holes or M2.3 screw holes 9.5±0.1 Dimensions (Unit: mm) slash Operating Characteristics Models with terminals D 2 S W The illustrations and dimensions are for models with solder terminals. Refer to "Terminals and Shapes" of the previous page for models with quick-connect terminals (#110) and PCB terminals. (Note. The dimensions not described are the same as those of models with pin plungers.
PAGE 5
D2SW Sealed Subminiature Basic Switch Models with lead wires Pin plunger models are shown as representatives. Dimensions and operation characteristics of other actuator models are the same as those of terminal models. The illustration and drawing shown is the SPDT model. SPST-NC model and SPST-NO model are omitted in the illustration below. ●Pin Plunger Models D2SW-3M D2SW-3M-0 D2SW-01M D2SW-01M-0 7.5±0.1 1.8 dia. A 2.35+0.1 -0.05 dia. holes PT 2.35+0.1 -0.05 Operating Force Releasing Force OP 16.
PAGE 6
D2SW Sealed Subminiature Basic Switch Precautions ★Please refer to "Basic Switches Common Precautions" for correct use. Cautions ●Degree of Protection Do not use the Switch underwater. The Switch was tested and found to meet the conditions necessary to meet the following standard, however, the test checks for water intrusion after immersion for a specified time D period, not for switching operation underwater.
PAGE 7
D2SW Sealed Subminiature Basic Switch D 2 S W • Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product.