Datasheet
4
D2SW Sealed Subminiature Basic Switch
D
2
S
W
Mounting Holes (Unit: mm)
Dimensions (Unit: mm) slash Operating Characteristics
The illustrations and dimensions are for models with solder terminals. Refer to "Terminals and Shapes" of the previous page for models with quick-connect terminals
(#110) and PCB terminals.
(Note. The dimensions not described are the same as those of models with pin plungers.)
The @ is replaced with the code for the terminal that you need. See the "List of Models" for available combinations of models.
Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
Note 2. The operating characteristics are for operation in the A direction ( ).
9.5
±0.1
2-2.4 dia. mounting holes
or M2.3 screw holes
Models with terminals
7.5
±0.1
1.8 dia.
10.1
2.35
+0.1
dia. holes
-0.05
2.35
+0.1
-0.05
7.7
PT
OP
2.9
0.5
R0.8
1.6
3.2
5.15
1.6
1.8
7.3
3.3
±0.1
9.5
±0.1
8.5
±0.2
2.5
±0.07
dia.
15.5
±0.2
18.7
±0.2
0.55
19.8
±0.2
6.4
±0.2
A
●Pin Plunger Models
D2SW-3@
D2SW-01@
Operating Force OF Max.
Releasing Force RF Min.
1.77 N {180 gf}
0.29 N {30 gf}
Pretravel PT Max.
Overtravel OT Min.
Movement Differential MD Max.
0.6 mm
0.5 mm
0.1 mm
Operating Position OP 8.4±0.3 mm
●Hinge Lever Models
D2SW-3L1@
D2SW-01L1@
Operating Force OF Max.
Releasing Force RF Min.
0.59 N {60 gf}
0.06 N {6 gf}
Overtravel OT Min.
Movement Differential MD Max.
1.0 mm
0.8 mm
Free Position FP Max.
Operating Position OP
13.6 mm
8.8±0.8 mm
A
OP
14.5
5.9
3.6
t=0.3*
*Stainless-steel lever
FP
●Simulated Roller Lever Models
D2SW-3L3@
D2SW-01L3@
Operating Force OF Max.
Releasing Force RF Min.
0.59 N {60 gf}
0.06 N {6 gf}
Overtravel OT Min.
Movement Differential MD Max.
1.0 mm
0.8 mm
Free Position FP Max.
Operating Position OP
15.5 mm
10.7±0.8 mm
A
OP
15.8
5.9
3.6
t=0.3*
R1.3
*Stainless-steel lever
FP
●Hinge Roller Lever Models
D2SW-3L2@
D2SW-01L2@
Operating Force OF Max.
Releasing Force RF Min.
0.59 N {60 gf}
0.06 N {6 gf}
Overtravel OT Min.
Movement Differential MD Max.
1.0 mm
0.8 mm
Free Position FP Max.
Operating Position OP
19.3 mm
14.5±0.8 mm
A
OP
14.5
5.9
4.8x3.2 *2 dia.
t=0.3*1
*1. Stainless-steel lever
*2. Polyacetal resin roller
FP