Datasheet

5
D2SW Sealed Subminiature Basic Switch
D
2
S
W
Pin plunger models are shown as representatives. Dimensions and operation characteristics of other actuator models are the same as those of terminal models.
The illustration and drawing shown is the SPDT model. SPST-NC model and SPST-NO model are omitted in the illustration below.
Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
Note 2. The operating characteristics are for operation in the A direction ( ).
Models with lead wires
●Pin Plunger Models
D2SW-3M
D2SW-3M-0
D2SW-01M
D2SW-01M-0
300 mm type
Dimensions
1,000 mm type
300±10L 1,000±30
7.5
±0.1
1.8 dia.
16.4
2.35
+0.1
dia. holes
-0.05
2.35
+0.1
-0.05
16.9
L
9.5
±0.1
（5）
21.2
AV0.5f molded lead
wire (red)*
AV0.5f molded lead
wire (blue)*
AV0.5f molded lead
wire (black)*
5.15
0.7
PT
OP
2.9
9.2
6.4
±0.2
A
2.5
±0.07
dia.
* UL/CSA approved models have UL approved wiring
(AWG22 UL1015).
Operating Force OF Max.
Releasing Force RF Min.
1.77 N {180 gf}
0.29 N {30 gf}
Pretravel PT Max.
Overtravel OT Min.
Movement Differential MD Max.
0.6 mm
0.5 mm
0.1 mm
Operating Position OP 8.4±0.3 mm