Datasheet

ManualsBrandsOmron Electronic Components ManualsMicroswitchesMicro Switch D2VW, 5A, 1CO, 1.96N, Pin Plunger

665

Text

664

Text

High-quality, High-precision Miniature

Switch Conforms to IP67 (Lead wire

type only)

■

Use of epoxy resin assured stable sealing, making

this switch ideal for places subject to water spray

or excessive dust.

■

V-series internal mechanism assures high

precision and long life.

■

Ideal for automobiles, agricultural machines, large-

scale home applications, and industrial

equipment, which require high environmental

resistance.

■

Models available with conformance to safety

standards, including UL, CSA and VDE.

Subminiature Basic Switch (Sealed) – D2VW

Note: 1. The standard lengths of the lead wires (AV0.75f) of models incorporating them are 30cm.

2. Consult your Omron sales representative for details on SPST-NO and SPST-NC models.

3. Add "HS" or "MS" to the end of the model number for the UL/CSA approved version (eg D2VW-01-1 D2VW-01-1HS).

Consult your Omron representative for details.



Ultra Subminiature Basic Switch (Non-Sealed) – D3C

ALL DIMENSIONS SHOWN ARE IN MILLIMETRES.

To convert millimetres into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

Non-Sealed Microswitches

CAT. No. C099-E2-02D

Using Micro Loads



Using a model for ordinary loads to open or close the contact of

a miroload circuit may result in faulty contact. Use models that

operate in the following range. However, even when using micro

load models within the operating range shown below, if inrush

current occurs when the contact is opened or closed, it may

increase contact wear and so decrease durability. Therefore,

insert a contact protection circuit where necessary.

The minimum applicable load is the N-level refreence value. This

value indicates the malfunction reference level for the reliability

level of 60% (

60). The equation,

60 = 0.5 x 10-6/operations

indicates that the estimated malfunction rate is less than

1/2,000,000 operations with a reliability level of 60%.

Omron 08 Cat 565-773 5/10/07 15:58 Page 664

Summary of content (5 pages)

PAGE 1
Omron 08 Cat 565-773 5/10/07 15:58 Page 664 Text Subminiature Basic Switch (Non-Sealed) – D3C Ultra Text Subminiature Basic Switch (Sealed) – D2VW High-quality, High-precision Miniature Switch Conforms to IP67 (Lead wire type only) ■ Use of epoxy resin assured stable sealing, making this switch ideal for places subject to water spray or excessive dust. ■ V-series internal mechanism assures high precision and long life.
PAGE 2
Omron 08 Cat 565-773 5/10/07 15:58 Page 666 Text Subminiature Basic Switch (Sealed) – D2VW Text Subminiature Basic Switch (Sealed) – D2VW Sealed Microswitches Note: For more information on the minimum applicable load, refer to 'using micro loads' at the end of this datasheet.
PAGE 3
Omron 08 Cat 565-773 5/10/07 15:58 Page 666 Text Subminiature Basic Switch (Sealed) – D2VW Text Subminiature Basic Switch (Sealed) – D2VW Sealed Microswitches Note: For more information on the minimum applicable load, refer to 'using micro loads' at the end of this datasheet.
PAGE 4
Omron 08 Cat 565-773 5/10/07 15:58 Page 668 Text Subminiature Basic Switch (Sealed) – D2VW Text Subminiature Basic Switch (Sealed) – D2VW Sealed Microswitches Using Micro Loads Using a model for ordinary loads to open or close the contact of a miroload circuit may result in faulty contact. Use models that operate in the following range.
PAGE 5
Omron 08 Cat 565-773 5/10/07 15:58 Page 668 Text Subminiature Basic Switch (Sealed) – D2VW Text Subminiature Basic Switch (Sealed) – D2VW Sealed Microswitches Using Micro Loads Using a model for ordinary loads to open or close the contact of a miroload circuit may result in faulty contact. Use models that operate in the following range.