Datasheet

4
D2VW Sealed Miniature Basic Switch
D
2
V
W
Characteristics
Note. The data given above are initial values.
*1. The dielectric strength shown in the table indicates the value for models
with a Separator (refer to "Basic Switch Common Accessories").
*2. For the pin plunger models, the above values apply for use at the free
position and total travel position. For the lever models, they apply at the
total travel position. Close or open circuit of the contact is 1 ms max.
*3. For testing conditions, consult your OMRON sales representative.
Mounting Holes (Unit: mm)
Dimensions (Unit: mm) and Operating Characteristics
Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
Note 2. The operating characteristics are for operation in the A direction ( ).
Item Model D2VW-5 models D2VW-01 models
Permissible operating speed 0.1mm to 1m/s (for pin plunger models)
Permissible
operating
frequency
Mechanical 300 operations/min
Electrical 60 operations/min
Insulation resistance 100 M Ω min. (500 VDC with insulation tester)
Contact
resistance
(initial value)
Terminal models 50 m Ω max.
Molded lead wire
terminals (300mm)
100 m
Ω max.
Molded lead wire
terminals (1,000mm)
200 m
Ω max.
Dielectric
strength *1
Between terminals of the
same polarity
1,000 VAC 50/60 Hz for 1 min
Between current-carrying
metal parts and ground
1,500 VAC 50/60 Hz for 1 min
Between terminals and
non-current-carrying
metal parts
1,500 VAC 50/60 Hz for 1 min
Vibration
resistance *2
Malfunction 10 to 55 Hz, 1.5 mm double amplitude
Shock
resistance
Destruction 1,000m/s
2
{approx. 100G} max.
Malfunction *2 300m/s
2
{approx. 30G} max.
Durability *3
Mechanical 10,000,000 operations min. (60 operations/min)
Electrical
100,000 operations min.
(30 operations/min)
1,000,000 operations min.
(30 operations/min)
Degree of
protection
Terminal models IEC IP67 (excluding the terminals on terminal models)
Molded lead wire models IEC IP67
Degree of protection against electric
shock
Class l
Proof tracking index (PTI) 175
Ambient operating temperature
–40°C to
+ 85°C (at ambient humidity of 60% max.)
(with no icing or condensation)
Ambient operating humidity 95% max. (for + 5°C to + 35°C)
Weight Approx. 7 g (for pin plunger models with terminals)
22.2
±0.1
10.3
±0.1
2-3.1 dia. mounting holes
or M3 screw holes
The illustrations and dimensions are for pin plunger models.
Dimensions and operation characteristics of other actuator models are the same as those of molded lead
wires models.
Models with solder terminals
t0.5
3-Solder terminals
5.2
5.2
2.5
0.5
2.4 dia. holes
3.1
+0.13
dia. holes
-0.03
3.1
+0.13
-0.03
1.3 dia. holes
4.7510.3
1.2
5.2
8.4
2.5
dia.
20.2
±0.25
10.3
±0.1
3.2
±0.1
dia.
22.2
±0.1
2.8
15.9
PT
OP
2.8
33
A
●Pin Plunger Models
D2VW-5-1
D2VW-01-1
Operating Force OF Max.
Releasing Force RF Min.
1.96 N {200 gf}
0.29 N {30 gf}
Pretravel PT Max.
Overtravel OT Min.
Movement Differential MD Max.
1.2 mm
1.0 mm
0.4 mm
Operating Position OP 14.7±0.4 mm