Datasheet

579
Text
578
Text
Miniature Basic Switch (Non-Sealed) – D3V
Non-Sealed Microswitches
Short Hinge Lever Models
Note: Stainless-steel lever
D3V-21G1M-1@4A-Δ
D3V-161M-1@5-Δ
D3V-111M-1@5-Δ
D3V-111M-1@4-Δ
D3V-61M-1@4-Δ
D3V-6G1M-1@3-Δ
D3V-011M-1@3-Δ
➡
A
t=0.5
Three, quick-connect
terminals (#187)
D3V-21G1M-14A-●-▲
D3V-161M-15-
●-▲
D3V-161M-14-●-▲
D3V-111M-15-●-▲
D3V-111M-14-
●
-
▲

D3V-11G1M-13-●-▲
D3V-61M-14-●-▲
D3V-6G1M-13-
●-▲
D3V-011M-13-
●-▲
Model D3V-●●■1-■6-●-▲ ▼ D3V-●●■1-■5B-●-▲ ▼ D3V-●●■1-■5-●-▲ ▼
OF max. 3.92 N {400gf} 3.43 N {350gf} 1.96 N {200gf}
RF min. 0.78 N {80gf} 0.78 N {80gf} 0.49 N {50gf}
PT max. 1.6 mm
OT min. 0.8 mm
MD max. 0.6 mm ( F gap type ) or 0.5 mm ( G gap type )
OP 15.2±0.5 mm
Model D3V-●●■-■4B-●-▲ ▼ D3V-●●■-■4A-●-▲ ▼ D3V-●●■1-■4-●-▲ ▼ D3V-●●■1-■3-●-▲ ▼
OF max. 1.47N {150gf} 1.23N {125gf} 0.98N {100gf} 0.49 N {50gf}
RF min. 0.20N {20gf} 0.20N {20gf} 0.15N {15gf} 0.05 N {5gf}
PT max. 1.6 mm 1.6 mm
OT min. 0.8 mm 0.8 mm
MD max. 0.5 mm ( G gap type ) 0.6 mm ( F gap type ) or 0.5 mm ( G gap type )
OP 15.2±0.5 mm
Short Hinge Lever Models
Model D3V-●●■1M-■6-●-▲ ▼ D3V-●●■1M-■5B-●-▲ ▼ D3V-●●■1M-■5-●-▲ ▼
OF max. 3.92 N {400gf} 3.43 N {350gf} 1.96 N {200gf}
RF min. 0.78 N {80gf} 0.78 N {80gf} 0.49 N {50gf}
PT max. 1.6 mm
OT min. 0.8 mm
MD max. 0.6 mm ( F gap type ) or 0.5 mm ( G gap type )
OP 15.2±0.5 mm
Model D3V-●●■1M-■4B-●-▲ ▼ D3V-●●■1M-■4A-●-▲ ▼ D3V-●●■1M-■4-●-▲ ▼ D3V-●●■1M-■3-●-▲ ▼
OF max. 1.47N {150gf} 1.23N {125gf} 0.98N {100gf} 0.49 N {50gf}
RF min. 0.20N {20gf} 0.20N {20gf} 0.15N {15gf} 0.05 N {5gf}
PT max. 1.6 mm 1.6 mm
OT min. 0.8 mm 0.8 mm
MD max. 0.5 mm ( G gap type ) 0.6 mm ( F gap type ) or 0.5 mm ( G gap type )
OP 15.2±0.5 mm
Model D3V-●●■1K-■6-●-▲ ▼ D3V-●●■1K-■5B-●-▲ ▼ D3V-●●■1K-■5-●-▲ ▼
OF max. 2.60 N {265gf} 2.26 N {230gf} 1.27 N {130gf}
RF min. 0.25 N {25gf} 0.27 N {28gf} 0.16 N {16gf}
PT max. 3.5 mm
OT min. 1.1 mm
MD max. 1.2 mm ( F gap type ) or 1.1 mm ( G gap type )
OP 15.2±1.2 mm
Miniature Basic Switch (Non-Sealed) – D3V
Dimensions & Operating Characteristics
Note: 1. All units are in millimetres unless otherwise indicated.
2. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
3. The following illustrations and drawings are for quick-connect terminals (#187) (terminals C2). D3V models incorporate terminals
A, C and C6. Terminals A, C and C6 are omitted from the following drawings. Refer to Terminals on page 10 for these terminals.
4. The following illustrations and drawings are for models with the hinge position set to external/further than plunger. Models with
the hinge position set to internal position are not shown here. For details about the internal position models, contact your
OMRON sales representative. Operating characteristics are the same for these two types of models.
5. The
●● in the model number is for the operating force.
6. The
■ in the model number is for the contact gap.
7. The
■ in the model number is for the terminal code.
8. The
● in the model number is for the enclosure material.
9. The
▲ in the model number is for the mounting hole size.
10. The operating characteristics are for operation in the A direction ( ).
➡
Pin Plunger Models
D3V-21G-1@4A-Δ
D3V-16-1@5-Δ
D3V-11-1@5-Δ
D3V-11-1@4-Δ
D3V-6-1@4-Δ
D3V-6G-1@3-Δ
D3V-01-1@2-Δ
D3V-01-1@3-Δ
➡
A
t=0.5
Three, quick-connect
terminals (#187)
■
Mounting Holes
Two, 3.1-dia. mounting holes or
M3 screw holes
10.3±0.1
22.2±0.1
Model D3V-●●■-■6-●-▲ ▼ D3V-●●■-■5B-●-▲ ▼ D3V-●●■-■5-●-▲ ▼ D3V-●●■-■4B-●-▲ ▼
OF max. 3.92 N {400gf} 3.43 N {350gf} 1.96 N {200gf} 1.47N {150gf}
RF min. 0.78 N {80gf} 0.78 N {80gf} 0.49 N {50gf} 0.20N {20gf}
PT max. 1.2 mm 1.2 mm
OT min. 1.0 mm 1.0 mm
MD max. 0.4 mm ( F gap type ) or 0.3 mm ( G gap type ) 0.3 mm ( G gap type )
OP 14.7±0.4 mm
Model D3V-●●■-■4A-●-▲ ▼ D3V-●●■-■4-●-▲ ▼ D3V-●●■-■3-●-▲ ▼ D3V-●●■-■2-●-▲ ▼
OF max. 1.23N {125gf} 0.98N {100gf} 0.49 N {50gf} 0.25 N {25gf}
RF min. 0.20N {20gf} 0.15N {15gf} 0.05 N {5gf} 0.03 N {3gf}
PT max. 1.2 mm
OT min. 1.0 mm
MD max. 0.3 mm ( G gap type ) 0.4 mm ( F gap type ) or 0.3 mm ( G gap type )
OP 14.7±0.4 mm
Pin Plunger models
Omron 08 Cat 565-773 5/10/07 15:57 Page 578