Datasheet

575
Text
574
Text
Miniature Basic Switch (Non-Sealed) – D3V
Non-Sealed Microswitches
■
Ratings
Specifications
Type Rated voltage Non-inductive load Inductive load
Resistive load Lamp load Inductive load Motor load
NC NO NC NO NC NO NC NO
D3V-25 250 VAC 25 A 5 A
D3V-21 250 VAC 21 A 3 A 12 A 4 A
8 VDC 21 A 5 A 12 A 7 A
30 VDC 14 A 5 A 12 A 5 A
125 VDC 0.6 A 0.1 A 0.6 A 0.1 A
250 VDC 0.3 A 0.05 A 0.3 A 0.05 A
D3V-16 250 VAC 16 A 2 A 10 A 3 A
8 VDC 16 A 4 A 10 A 6 A
30 VDC 10 A 4 A 10 A 4 A
125 VDC 0.6 A 0.1 A 0.6 A 0.1 A
250 VDC 0.3 A 0.05 A 0.3 A 0.05 A
D3V-11 250 VAC 11 A 1.5 A 6 A 2 A
8 VDC 11 A 3 A 6 A 3 A
30 VDC 6 A 3 A 6 A 3 A
125 VDC 0.6 A 0.1 A 0.6 A 0.1 A
250 VDC 0.3 A 0.05 A 0.3 A 0.05 A
D3V-6 250 VAC 6 A 3 A 4 A –
8 VDC 6 A 3 A 4 A –
30 VDC 6 A 3 A 4 A
125 VDC 0.4 A 0.1 A 0.4 A
250 VDC 0.3 A 0.05 A 0.2 A
D3V-01 125 VAC 0.1 A – – –
8 VDC 0.1 A – – –
30 VDC 0.1 A
Note: 1. The above current values are the normal current values of models with a contact gap of 1 mm (gap F), which vary with the
normal current values of models with a contact gap of 0.5 mm (gap G).
2. Inductive load has a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).
3. Lamp load has an inrush current of 10 times the steady-state current.
4. Motor load has an inrush current of 6 times the steady-state current.
5. The ratings values apply under the following test conditions:
Ambient temperature: 20±2°C
Ambient humidity: 65±5%
Operating frequency: 30 operations/min
Miniature Basic Switch (Non-Sealed) – D3V
01 A (OF: 0.49 N {50 gf})
Actuator Hinge position Contact form
SPDT SPST-NC SPST-NO
Pin plunger – D3V-01-1■3-●-▲ ▼ D3V-01-2■3-●-▲ ▼ D3V-01-3■3-●-▲ ▼
Short hinge lever Internal D3V-011-1■3-●-▲ ▼ D3V-011-2■3-●-▲ ▼ D3V-011-3■3-●-▲ ▼
M D3V-011M-1■3-●-▲ ▼ D3V-011M-2■3-●-▲ ▼ D3V-011M-3■3-●-▲ ▼
Hinge lever Internal D3V-012-1■3-●-▲ ▼ D3V-012-2■3-●-▲ ▼ D3V-012-3■3-●-▲ ▼
M D3V-012M-1■3-●-▲ ▼ D3V-012M-2■3-●-▲ ▼ D3V-012M-3■3-●-▲ ▼
Long hinge lever Internal D3V-013-1■3-●-▲ ▼ D3V-013-2■3-●-▲ ▼ D3V-013-3■3-●-▲ ▼
M D3V-013M-1■3-●-▲ ▼ D3V-013M-2■3-●-▲ ▼ D3V-013M-3■3-●-▲ ▼
Simulated roller lever Internal D3V-014-1■3-●-▲ ▼ D3V-014-2■3-●-▲ ▼ D3V-014-3■3-●-▲ ▼
M D3V-014M-1■3-●-▲ ▼ D3V-014M-2■3-●-▲ ▼ D3V-014M-3■3-●-▲ ▼
Short hinge roller lever Internal D3V-015-1■3-●-▲ ▼ D3V-015-2■3-●-▲ ▼ D3V-015-3■3-●-▲ ▼
M D3V-015M-1■3-●-▲ ▼ D3V-015M-2■3-●-▲ ▼ D3V-015M-3■3-●-▲ ▼
Hinge roller lever Internal D3V-016-1■3-●-▲ ▼ D3V-016-2■3-●-▲ ▼ D3V-016-3■3-●-▲ ▼
M D3V-016M-1■3-●-▲ ▼ D3V-016M-2■3-●-▲ ▼ D3V-016M-3■3-●-▲ ▼
r
01 A (OF: 25 N {25 gf})
Actuator Hinge position Contact form
SPDT SPST-NC SPST-NO
Pin plunger – D3V-01-1■2-●-▲ ▼ D3V-01-2■2-●-▲ ▼ D3V-01-3■2-●-▲ ▼
6 A (OF: 0.49 N {50 gf})
Actuator Hinge position Contact form
SPDT SPST-NC SPST-NO
Pin plunger – D3V-6G-1■3-●-▲ ▼ D3V-6G-2■3-●-▲ ▼ D3V-6G-3■3-●-▲ ▼
Short hinge lever Internal D3V-6G1-1■3-●-▲ ▼ D3V-6G1-2■3-●-▲ ▼ D3V-6G1-3■3-●-▲ ▼
M D3V-6G1M-1■3-●-▲ ▼ D3V-6G1M-2■3-●-▲ ▼ D3V-6G1M-3■3-●-▲ ▼
Hinge lever Internal D3V-6G2-1■3-●-▲ ▼ D3V-6G2-2■3-●-▲ ▼ D3V-6G2-3■3-●-▲ ▼
M D3V-6G2M-1■3-●-▲ ▼ D3V-6G2M-2■3-●-▲ ▼ D3V-6G2M-3■3-●-▲ ▼
Long hinge lever Internal D3V-6G3-1■3-●-▲ ▼ D3V-6G3-2■3-●-▲ ▼ D3V-6G3-3■3-●-▲ ▼
M D3V-6G3M-1■3-●-▲ ▼ D3V-6G3M-2■3-●-▲ ▼ D3V-6G3M-3■3-●-▲ ▼
Simulated roller lever Internal D3V-6G4-1■3-●-▲ ▼ D3V-6G4-2■3-●-▲ ▼ D3V-6G4-3■3-●-▲ ▼
M D3V-6G4M-1■3-●-▲ ▼ D3V-6G4M-2■3-●-▲ ▼ D3V-6G4M-3■3-●-▲ ▼
Short hinge roller lever Internal D3V-6G5-1■3-●-▲ ▼ D3V-6G5-2■3-●-▲ ▼ D3V-6G5-3■3-●-▲ ▼
M D3V-6G5M-1■3-●-▲ ▼ D3V-6G5M-2■3-●-▲ ▼ D3V-6G5M-3■3-●-▲ ▼
Hinge roller lever Internal D3V-6G6-1■3-●-▲ ▼ D3V-6G6-2■3-●-▲ ▼ D3V-6G6-3■3-●-▲ ▼
M D3V-6G6M-1■3-●-▲ ▼ D3V-6G6M-2■3-●-▲ ▼ D3V-6G6M-3■3-●-▲ ▼
r
Note: Lever is not recommendable for 0.25N OF type because of
the low OF.
The ■ in the model number is for the terminal code.
A: Solder terminals
C2: Quick-connect terminals (#187)
C: Quick-connect terminals (#250)
C6: RAST5 terminals (#250)
The
● in the model number is for enclosure material code.
None: Standard
T: High Temperature (200˚C, 155˚C) and EN60695-2-
11/-12 (Glow-wire flammability test method)
conformity.
W2: Standard temperature (105˚C, 85˚C) and EN60695-2-11/-12
(Glow-wire flammability test method) conformity, PTI250.
The
▲ in the model number is for the mounting hole size.
None: 3.1 mm
K: 2.9 mm
The
▼ is for the special code.
None: Standard
H: High Temperature (125˚C)
Omron 08 Cat 565-773 5/10/07 15:57 Page 574