Datasheet

577
Text
576
Text
Miniature Basic Switch (Non-Sealed) – D3V
Non-Sealed Microswitches
COM
NC
NO
COM
NC
COM
NO
SPDT SPST-NC SPST-NO
■
Contact Form
Dimensions
t = 0.5
Three, solder/quick-connect
terminals (#187)
(10)
2.9
(6.5)
(5.5)
1.6 dia.
2.4 dia.
4.75±0.1
6.35
3.2 (see note)
Note: Indicates the length to the center of the
1.6-dia. holes
t = 0.5
Three, quick-connect
terminals (#187)
(10)
2.9
(6.5)
(5.5)
1.6-dia. terminal hole
4.75±0.1
3.2
6.35
t = 0.8
Three, quick-connect
terminals (#250)
(12.0)
3.2
(7.7)
(4.9)
1.65-dia. terminal hole
6.35±0.1
3.95
8
Terminal Solder Terminal Quick-connect Terminal Quick-connect Terminal Quick-connect RAST5
type (A) (#187) (C2) (#250) (C) Terminals (#250) (C6)
COM
■
Terminals
Terminal
dimensions
Note: 1. All units are in millimetres unless otherwise indicated.
2. The table below is for the SPDT contact specifications. Two terminals will be available for SPST-NO or SPST-NC contact
specifications. For terminal positions, refer to the above Contact Form.
Item D3V-25 D3V-21 D3V-16 D3V-11 D3V-6 D3V-01
Contact Specification Rivet Crossbar
Material Silver alloy Gold alloy
Gap (standard value) 1 mm (F gap) type 0.5 mm 1 mm (F gap) or 0.5 mm (G gap) 1.0 mm
Inrush NC 50 A max. 50 A max. 40 A max. 24 A max. 15 A max. –
current
NO
Minimum applicable load 160 mA at 5 VDC 1 mA at 5 VDC
■
Contact Specifications
Rated voltage D3V-25* D3V-21G D3V-16 D3V-11 D3V-6 D3V-01
125 VAC – – – – – 0.1 A
250 VAC 22(5)A 20 (4) A 16 (3) A 11 (3) A 6 (2) A –
250 VAC – 21 (8) A** – – – –
Testing conditions: 50,000 operations, T85 (0°C to 85°C) for D3V-21/D3V-01, T105 (0°C to 105°C) for D3V-16/D3V-11/D3V-6 and 1200
(0 to 200˚C) for D3V-6/01 with suffix T,T155 (0 to 155˚C) for D3V-11 with suffix T.
*D3V-25 rating (projected). **Testing conditions: 10,000 operations, T85 (0°C to 85°C).
EN 61058-1: 1992+A1: 1993 (License No. 119151L)
Rated voltage D3V-16 D3V-11 D3V-6 D3V-01
125 VAC – – – 0.1 A
250 VAC 16(3) A 11(3) A 6(2) A –
EN 60695-2-11 Ed.2, EN 60695-2-12 Ed.2 Glow-wire flammability test methods
Miniature Basic Switch (Non-Sealed) – D3V
Rated voltage D3V-25* D3V-21G D3V-16 D3V-16G D3V-11 D3V-11G D3V-6 D3V-6G D3V-01
125 VAC 1 HP 3/4 HP 16 A, 1/2 HP 16 A, 1/2 HP 11 A, 1/2 HP 11 A, 1/2 HP 6 A, 1/4 HP 6 A, 1/4 HP 0.1 A
250 VAC 22A, 2HP 20.1 A, 3/4 HP 16 A, 1/2 HP 16 A, 1/2 HP 11 A, 1/2 HP 11 A, 1/2 HP 6 A, 1/4 HP 6 A, 1/4 HP –
125 VDC – – 0.6 A 0.1 A 0.6 A 0.1 A – – –
250 VDC – – 0.3 A – 0.3 A – – – –
■
Approved Standards
UL1054 (File No. E41515) CSA C22.2 No.55 (File No. LR21642)
(Only Standard Ratings are listed.)
■
Characteristics
Operating speed 0.1 mm to 1 m/s (at pin plunger models)
Operating frequency Mechanical: 600 operations/min
Electrical: 60 operations/min
Insulation resistance 100 MΩ min. (at 500 VDC)
Contact resistance (initial values) D3V-21, D3V-25: 50 mΩ max.
D3V-16, D3V-11, D3V-6: 30 mΩ max.
D3V-01, 0.49 N {50 gf}: 50 mΩ max.
0.25 N {25 gf}: 100 mΩ max..
Dielectric strength (see note 1) 1,000 VAC, 50/60 Hz for 1 min between terminals of the same polarity
2,000 VAC, 50/60 Hz for 1 min between current-carrying metal parts and ground, and
between each terminal and non-current-carrying metal parts
Vibration resistance (see note 2) Malfunction: 10 to 55 Hz, 1.5-mm double amplitude
Shock resistance (see note 2) Destruction: 400 m/s
2
{approx. 40G} max.
Malfunction: 100 m/s
2
{approx. 10G} max.
Durability (see note 3) Mechanical: 10,000,000 operations min.
Electrical: D3V-21, D3V-25: 50,000 operations min.
D3V-16: 100,000 operations min.
D3V-11: 200,000 operations min.
D3V-6, D3V-01: 500,000 operations min.
Degree of protection IEC IP40
Degree of protection Class I
against electric shock
Proof tracking index (PTI) 250 (High Temperature type with suffix “-T”: 175)
Ambient operating temperature D3V-25: -25°C to 85°C (with no icing)
D3V-21: -25°C to 85°C (with no icing)
D3V-16: -25°C to 105°C (High temperature type H -25°C to 125°C) with no icing)
D3V-11: -25°C to 105°C (High temperature type H; -25°C to 125°C, T; -25°C to 155°C) (with no icing)
D3V-6: -25°C to 105°C (High temperature type H; -25°C to 125°C, T; -25°C to 200°C) (with no icing)
D3V-01: -25°C to 85°C (High temperature type T; -25°C to 200°C) (with no icing)
Ambient operating humidity 85% max. (for 5°C to 35°C)
Weight Approx. 6.2 g (pin plunger model)
Note: 1. The dielectric strength values shown in the table are for models with a Separator.
2. For the pin plunger models, the above values apply for use at both the free position and total travel position. For the lever
models, they apply at the total travel position.
3. For testing conditions, contact your OMRON sales representative.
Note: *projected
Omron 08 Cat 565-773 5/10/07 15:57 Page 576