Datasheet

7
D3V Miniature Basic Switch
D
3
V
Characteristics
Note 1. The data given above are initial values.
Note 2. The dielectric strength values shown in the table are for models with a Separator.
Note 3. For the pin plunger models, the above values apply for use at both the free position and total travel position. For the lever models, they apply at the total travel
position.
Note 4. For testing conditions, contact your OMRON sales representative.
Terminals/Appearances (Unit: mm)
Note. The table below is for the SPDT contact specifications. Two terminals will be available for SPST-NO or SPST-NC contact specifications. For terminal positions,
refer to Contact Form on page 5.
Mounting Holes (Unit: mm)
Item Model D3V-21 D3V-16 D3V-11 D3V-6 D3V-01
Permissible operating speed 0.1 mm to 1 m/s (pin plunger models)
Permissible operating frequency
Mechanical: 600 operations/min max.
Electrical: 30 operations/min max.
Insulation resistance 100 MΩ min. (at 500 VDC with insulation tester)
Contact resistance (initial values) 50 mΩ max. 30 mΩ max.
0.49N {50 gf}: 50 mΩ
max.
0.25N {25 gf}: 100 mΩ
max.
Dielectric strength (see note 2)
1,000 VAC, 50/60 Hz for 1 min between terminals of the same polarity
2,000 VAC, 50/60 Hz for 1 min between current-carrying metal parts and ground, and between each terminal and non-
current-carrying metal parts
Vibration resistance (see note 3) Malfunction: 10 to 55 Hz, 1.5-mm double amplitude
Shock resistance (see note 3)
Destruction: 400 m/s
2
{approx. 40 G} max.
Malfunction: 100 m/s
2
{approx. 10 G} max.
Durability (see note 4)
Mechanical 10,000,000 operations min.
Electrical 50,000 operations min. 100,000 operations min. 200,000 operations min. 500,000 operations min.
Degree of protection IEC IP40
Degree of protection against electric shock Class I
Proof tracking index (PTI) 250
Ambient operating temperature
–25 to +85°C
(at ambient humidity
of 60% max.) (with no
icing or condensation)
–25 to +105°C (at ambient humidity of 60% max.)
(with no icing or condensation)
–25 to +85°C
(at ambient humidity
of 60% max.) (with no
icing or condensation)
Ambient operating humidity 85% max. (for +5 to +35°C)
Weight Approx. 6.2 g (pin plunger models)
Solder Terminals
(A)
Quick-connect Terminals (#187)
(C2)
Quick-connect Terminals (#250)
(C)
t = 0.5
Three, solder terminals
(10)
2.9
(6.5)
(5.5)
t = 0.5
Three, quick-connect
terminals (#187)
(10)
2.9
(6.5)
(5.5)
t = 0.8
Three, quick-connect
terminals (#250)
(12.0)
3.2
(7.7)
(4.9)
1.6 dia.
2.4 dia.
4.75±0.1
6.35
3.2 (see note)
Note: Indicates the length to the center of the
1.6-dia. holes
1.6-dia. terminal hole
4.75±0.1
3.2
6.35
1.65-dia. terminal hole
6.35±0.1
3.95
8
Two, 3.1-dia. mounting holes or
M3 screw holes
10.3±0.1
22.2±0.1