Datasheet

ManualsBrandsOmron Electronic Components ManualsPower RelaysPCB Power Relay G2R, 1CO, AC, 230V, 20.2kOhm

117

Text

116

Text

Specifications

■

Coil Ratings

Rated voltage 5 VDC 6 VDC 12 VDC 24 VDC 48 VDC 100 VDC

Rated current (50/60Hz) 106 mA 88.2 mA 43.6 mA 21.8 mA 11.5 mA 5.3 mA

Coil resistance 47 Ω 68 Ω 275 Ω 1,100 Ω 4,170 Ω 18,860 Ω

0.20 0.28 1.15 4.27 13.86 67.2

0.39 0.55 2.29 8.55 27.71 93.2

Must operate voltage 70% max. of rated voltage

Must release voltage 15% min. of rated voltage

Max. voltage 170% of rated voltage (at 23°C)

Power consumption Approx. 0.53 W

Coil inductance Armature OFF

(H) (ref. value) Armature ON

Rated voltage 12 VAC 24 VAC 100/(110) VAC 120 VAC 200/(220)VAC 220 VAC 230 VAC 240 VAC

93 mA 46.5 mA 11 mA 9.3 mA 5.5 mA 5.1 mA 4.7 mA 4.7 mA

75 mA 37.5 mA 9/(10.6) mA 7.5 mA 4.5 (5.3) mA 4.1 mA 3.8 mA 3.8 mA

Coil resistance 65 Ω 260 Ω 4,600 Ω 6,500 Ω 20,200 Ω 25,000 Ω 26,850 30,000 Ω

0.19 0.81 13.34 21 51.3 57.5 62 65.5

0.39 1.55 26.84 42 102 117 124 131

Must operate voltage 80% max. of rated voltage

Must release voltage 30% min. of rated voltage

Max. voltage 140% of rated voltage (at 23°C)

Power consumption Approx. 0.9 VA at 60 Hz (approx. 0.7 VA at 60 Hz)

Coil inductance Armature OFF

(H) (ref. value) Armature ON

Rated Current 50Hz

60Hz

Model Number Legend

G2R - VDC

123456789

1. Relay Function

None: Single-side stable

K: Double-winding latching

2. Number of Poles

1: 1 pole

2: 2 poles

3. Contact Form

None: ■PDT

A: ■PST-NO

4. Contact Type

None: Single

Z: Bifurcated

5. Enclosure Ratings

None: Flux protection

4: Fully sealed

6. Terminals

None: Straight PCB

T: Quick-connect (upper bracket mounting)

7. Classification

None: General-purpose

E: High-capacity

H: High-sensitivity

8. Safety Standards

None: UL/CSA/EN/SEV/TÜV

SKVD: UL/CSA/EN/SEV/TÜV/SEMKO

9. Rated Coil Voltage

Refer to Coil Ratings

PCB Power Relay – G2R

Power Relays

Rated coil voltage

Note: 1. When ordering, add the rated coil voltage to the model number.

Example: G2R-1A 12 VDC

2. Models with CTI250 material are also available.

Contact your OMRON representative for more details.

Ordering Information

Classification Enclosure

Ratings

Coil

Ratings

Contact Form

SPST-NO SPDT DPST-NO DPDT

PCB terminal General-purpose Flux protection AC/DC G2R-1A G2R-1 G2R-2A G2R-2

Fully sealed G2R-1A4 G2R-14 G2R-2A4 G2R-24

Bifurcated contact Flux protection DC G2R-1AZ G2R-1Z – –

Fully sealed G2R-1AZ4 G2R-1Z4 – –

High-capacity Flux protection AC/DC G2R-1A-E G2R-1-E – –

High-sensitivity Flux protection DC G2R-1A-H G2R-1-H G2R-2A-H G2R-2-H

Double-winding latching Flux protection G2RK-1A G2RK-1 G2RK-2A G2RK-2

General-purpose Unsealed AC G2R-1A-T G2R1-T – –

DC – –

Quick connect

(upper bracket

mounting)

A Power Relay for a Variety of

Purposes with Various Models

■

ROHS compliant

■

Conforms to EN 61810-1, UL508, CSA22.2,

SEV, SEMKO.

■

Meets EN60335-1 requirements for household

products.

■

Clearance and creepage distance:

8 mm/8 m.

■

Models with CTI250 material available.

■

High-sensitivity (360 mW) and high-capacity

(16 A) types available.

■

Double-winding latching type available.

Omron 08 Cat 1-302 5/10/07 15:39 Page 116

Summary of content (16 pages)

PAGE 1
5/10/07 15:39 Page 116 Text Power Relay – G2R PCB Text Power Relay – G2R PCB A Power Relay for a Variety of Purposes with Various Models Model Number Legend G2R ■ Conforms to EN 61810-1, UL508, CSA22.2, SEV, SEMKO. ■ Meets EN60335-1 requirements for household products. ■ Clearance and creepage distance: - 1 ■ ROHS compliant 2 3 4 5 ■ High-sensitivity (360 mW) and high-capacity 1. Relay Function None: Single-side stable K: Double-winding latching 6.
PAGE 2
5/10/07 15:39 Page 116 Text Power Relay – G2R PCB Text Power Relay – G2R PCB A Power Relay for a Variety of Purposes with Various Models Model Number Legend G2R ■ Conforms to EN 61810-1, UL508, CSA22.2, SEV, SEMKO. ■ Meets EN60335-1 requirements for household products. ■ Clearance and creepage distance: - 1 ■ ROHS compliant 2 3 4 5 ■ High-sensitivity (360 mW) and high-capacity 1. Relay Function None: Single-side stable K: Double-winding latching 6.
PAGE 3
5/10/07 15:39 Page 118 Text Power Relay – G2R PCB Text Power Relay – G2R PCB High-sensitivity Relays ■ Rated voltage 5 VDC 6 VDC 12 VDC 24 VDC 48 VDC Rated current (50/60Hz) (see Note. 1) 71.4 mA 60 mA 30 mA 15 mA 7.5 mA Coil resistance (see Note. 1) 70 Ω 100 Ω 400 Ω 1,600 Ω 6,400 Ω Coil inductance Armature OFF 0.37 0.53 2.14 7.80 31.20 (H) (ref. value) 1.07 4.27 15.60 62.40 Armature ON 0.
PAGE 4
5/10/07 15:39 Page 118 Text Power Relay – G2R PCB Text Power Relay – G2R PCB High-sensitivity Relays ■ Rated voltage 5 VDC 6 VDC 12 VDC 24 VDC 48 VDC Rated current (50/60Hz) (see Note. 1) 71.4 mA 60 mA 30 mA 15 mA 7.5 mA Coil resistance (see Note. 1) 70 Ω 100 Ω 400 Ω 1,600 Ω 6,400 Ω Coil inductance Armature OFF 0.37 0.53 2.14 7.80 31.20 (H) (ref. value) 1.07 4.27 15.60 62.40 Armature ON 0.
PAGE 5
/10/07 15:39 Page 120 Text Power Relay – G2R PCB Text Power Relay – G2R PCB ■ PCB/Fully Sealed Relays Item General-purpose (single contact) Bifurcated contact Item Number of poles 1 pole Load Resistive load (cosϕ = 1) Inductive load (cosϕ = 0.4; L/R = 7 ms) Resistive load (cosϕ = 1) Inductive load (cosϕ = 0.4; L/R = 7 ms) Rated Load 8 A at 250 VAC; 8 A at 30 VDC 6 A at 250 VAC; 4 A at 30 VDC 4 A at 250 VAC; 4 A at 30 VDC 1.5 A at 250 VAC; 5 A at 250 VAC; 2.
PAGE 6
5/10/07 15:39 Page 120 Text Power Relay – G2R PCB Text Power Relay – G2R PCB ■ PCB/Fully Sealed Relays Item General-purpose (single contact) Bifurcated contact Item Number of poles 1 pole Load Resistive load (cosϕ = 1) Inductive load (cosϕ = 0.4; L/R = 7 ms) Resistive load (cosϕ = 1) Inductive load (cosϕ = 0.4; L/R = 7 ms) Rated Load 8 A at 250 VAC; 8 A at 30 VDC 6 A at 250 VAC; 4 A at 30 VDC 4 A at 250 VAC; 4 A at 30 VDC 1.5 A at 250 VAC; 5 A at 250 VAC; 2.
PAGE 7
5/10/07 15:39 Page 122 Text Power Relay – G2R PCB Text Power Relay – G2R PCB Approved Standards UL 508 (File No. E41643), CSA 22.2 No.14 (File No. LR31928) ■ Double-winding Latching Relays Item 1 Pole Contact resistance 30 mΩ max. Set time 20 ms max 2 Poles Power Relays Omron 08 Cat 1-302 50 mΩ max. Model Reset time 20 ms max. Min. set/reset signal width 30 ms max. Max.
PAGE 8
5/10/07 15:39 Page 122 Text Power Relay – G2R PCB Text Power Relay – G2R PCB Approved Standards UL 508 (File No. E41643), CSA 22.2 No.14 (File No. LR31928) ■ Double-winding Latching Relays Item 1 Pole Contact resistance 30 mΩ max. Set time 20 ms max 2 Poles Power Relays Omron 08 Cat 1-302 50 mΩ max. Model Reset time 20 ms max. Min. set/reset signal width 30 ms max. Max.
PAGE 9
5/10/07 15:39 Page 124 Text Power Relay – G2R PCB Text Power Relay – G2R PCB 16 A, 250 VAC1 (AgSnIn contact) 16 A, 30 VDC1 (AgSnIn contact) 10 A, 250 VAC1 5 A, 250 VAC3 10 A, 30 VDC1 2 poles 5 A, 250 VAC1 2 A, 380 VAC1 5 A, 30 VDC1 SEMKO Contact form Coil ratings Contact ratings 1 pole 3 to 110 VDC 3 to 240 VAC 10/80 A, 250 VAC 3/100 A, 250 VAC 16/128 A, 250 VAC (AgSnIn contact) 2 poles Maximum Switching Power Flux Protection/Plug-in Relays G2R-1, G2R-1A, G2R-1-T, G2R-1A-T AC inductive load
PAGE 10
5/10/07 15:39 Page 124 Text Power Relay – G2R PCB Text Power Relay – G2R PCB 16 A, 250 VAC1 (AgSnIn contact) 16 A, 30 VDC1 (AgSnIn contact) 10 A, 250 VAC1 5 A, 250 VAC3 10 A, 30 VDC1 2 poles 5 A, 250 VAC1 2 A, 380 VAC1 5 A, 30 VDC1 SEMKO Contact form Coil ratings Contact ratings 1 pole 3 to 110 VDC 3 to 240 VAC 10/80 A, 250 VAC 3/100 A, 250 VAC 16/128 A, 250 VAC (AgSnIn contact) 2 poles Maximum Switching Power Flux Protection/Plug-in Relays G2R-1, G2R-1A, G2R-1-T, G2R-1A-T AC inductive load
PAGE 11
15:39 Page 126 Text Power Relay – G2R PCB Text Power Relay – G2R PCB Engineering Data (cont.) Fully Sealed Relays G2R-24, G2R-2A4 G2R-1Z4, G2R-1AZ4 DC resistive load AC resistive load DC resistive load DC inductive load (L/R = 7 ms) AC inductive load (cosφ = 0.4) AC resistive load DC resistive load DC inductive load (L/R = 7 ms) Endurance (x10 3 operations) DC inductive load (L/R = 7 ms) AC inductive load (cosφ = 0.4) Switching current (A) AC inductive load AC (cosφ = 0.
PAGE 12
15:39 Page 126 Text Power Relay – G2R PCB Text Power Relay – G2R PCB Engineering Data (cont.) Fully Sealed Relays G2R-24, G2R-2A4 G2R-1Z4, G2R-1AZ4 DC resistive load AC resistive load DC resistive load DC inductive load (L/R = 7 ms) AC inductive load (cosφ = 0.4) AC resistive load DC resistive load DC inductive load (L/R = 7 ms) Endurance (x10 3 operations) DC inductive load (L/R = 7 ms) AC inductive load (cosφ = 0.4) Switching current (A) AC inductive load AC (cosφ = 0.
PAGE 13
5/10/07 15:39 Page 128 Text Power Relay – G2R PCB Text Power Relay – G2R PCB Dimensions Relays with PCB Terminals Terminal Arrangement/ Internal Connections (Bottom View) SPDT Relays Note: 1. All units are in millimetres unless otherwise indicated. 2. Orientation marks are indicated as follows: G2R-14, G2R-1Z4 13.5 max. 29 max. (28.6)* Mounting Holes (Bottom View) Tolerance: ±0.1 (12.9)* 3.5 3.
PAGE 14
5/10/07 15:39 Page 128 Text Power Relay – G2R PCB Text Power Relay – G2R PCB Dimensions Relays with PCB Terminals Terminal Arrangement/ Internal Connections (Bottom View) SPDT Relays Note: 1. All units are in millimetres unless otherwise indicated. 2. Orientation marks are indicated as follows: G2R-14, G2R-1Z4 13.5 max. 29 max. (28.6)* Mounting Holes (Bottom View) Tolerance: ±0.1 (12.9)* 3.5 3.
PAGE 15
5/10/07 15:39 Page 130 Text Power Relay – G2R PCB Text Power Relay – G2R PCB DPST-NO Relays Relays with Quick-connect Terminals 13.5 max. 29 max. (28.6)* G2R-2A4 (12.8)* Six, 1.3-dia. holes 5 25.5 max. (24.7)* 1 3 G2R-1-T 7.5 6 8 0.5 0.3 1 (2.7) 4 2 5.2 17.4 Five, 1.3-dia. holes 4.75 7.5 4 5 1 (2.1) (2.1) 20 25.5 max. (25.2)* (0.3) + 1 S 7 + 2 4 3 7.5 R Seven, 1.3-dia. holes 5 6 0.5 45 max. (43.9)* *Average value SPST-NO Relays 7.5 20 1 1 Five, 1.3-dia.
PAGE 16
5/10/07 15:39 Page 130 Text Power Relay – G2R PCB Text Power Relay – G2R PCB DPST-NO Relays Relays with Quick-connect Terminals 13.5 max. 29 max. (28.6)* G2R-2A4 (12.8)* Six, 1.3-dia. holes 5 25.5 max. (24.7)* 1 3 G2R-1-T 7.5 6 8 0.5 0.3 1 (2.7) 4 2 5.2 17.4 Five, 1.3-dia. holes 4.75 7.5 4 5 1 (2.1) (2.1) 20 25.5 max. (25.2)* (0.3) + 1 S 7 + 2 4 3 7.5 R Seven, 1.3-dia. holes 5 6 0.5 45 max. (43.9)* *Average value SPST-NO Relays 7.5 20 1 1 Five, 1.3-dia.