Datasheet

ManualsBrandsOmron Electronic Components ManualsMOSFET RelaysMOSFET Relay G3VM, SSOP, 2NO, 60V, 400mA

G3VM-62J1

MOS FET Relays

New MOS FET Relays Designed for

Switching Minute Signals and Analog

Signals Have 2 Channels and a 60-V

Load Voltage.

• Continuous load current of 400 mA.

• Dielectric strength of 1,500 Vrms between I/O.

RoHS compliant

■ Application Examples

• Broadband systems

• Measurement devices

• Data Loggers

• Amusement machines

Note: The actual product is marked differently from the image

shown here.

■ List of Models

■ Dimensions

Note: All units are in millimeters unless otherwise indicated.

■ Terminal Arrangement/Internal Connections (Top View)

■ Actual Mounting Pad Dimensions (Recommended Value, Top View)

Contact form Terminals Load voltage (peak value) Model Number per stick Number per tape

DPST-NO Surface-mounting

terminals

60 VAC G3VM-62J1 50 ---

G3VM-62J1(TR) --- 2,500

4.4±

0.2

9.4±

0.25

0.4±

0.1

2.54±

0.25

2.1 max.

0.1

7.0±

0.4

0.5±

0.3

0.15

G3VM-62J1

Note: The actual product is marked differently

from the image shown here.

Weight: 0.2 g

8765

421

G3VM-62J1

6 to 6.3

1.2

0.8

2.542.54

G3VM-62J1

Summary of content (4 pages)

PAGE 1
MOS FET Relays G3VM-62J1 New MOS FET Relays Designed for Switching Minute Signals and Analog Signals Have 2 Channels and a 60-V Load Voltage. • Continuous load current of 400 mA. • Dielectric strength of 1,500 Vrms between I/O. RoHS compliant ! Note: ■ Application Examples The actual product is marked differently from the image shown here.
PAGE 2
G3VM-62J1 G3VM-62J1 ■ Absolute Maximum Ratings (Ta = 25°C) Item Input Symbol Rating Unit Measurement Conditions Note: LED forward current IF 50 mA Repetitive peak LED forward current IFP 1 A 100 µs pulses, 100 pps LED forward current reduction rate ∆ IF/°C −0.5 mA/°C Ta ≥ 25°C LED reverse voltage VR 5 V Connection temperature Tj 125 °C Output dielectric strength VOFF 60 V Continuous load current IO 400 mA ON current reduction rate ∆ ION/°C −4.
PAGE 3
G3VM Series G3VM Series Common Precautions !WARNING Be sure to turn OFF the power when wiring the Relay, otherwise an electric shock may be received. !WARNING Do not touch the charged terminals of the SSR, otherwise an electric shock may be received.
PAGE 4
G3VM Series G3VM Series Load Connection Solder Mounting Do not short-circuit the input and output terminals while the relay is operating or the relay may malfunction. Perform solder mounting under the following recommended conditions to prevent the temperature of the Relays from rising. AC Connection Through-hole Mounting (Once Only) Load Solder type DC Single Connection Load Preheating Soldering Lead solder SnPb 150°C 60 to 120 s 230 to 260°C 10 s max.