Datasheet

ManualsBrandsOmron Electronic Components ManualsMOSFET RelaysMOSFET Relay G3VM, SOP-4, 1NO, 80V, 350mA

G3VM-81G1

MOS FET Relays

New Relays Incorporating a MOS FET

Optically Coupled with an Infrared LED

Have a 4-pin SOP Package and 80-V

Load Voltage.

• Continuous load current of 350 mA.

• Dielectric strength of 1,500 Vrms between I/O.

RoHS compliant

■ Application Examples

• Broadband systems

• Measurement devices

• Data loggers

• Amusement machines

Note: The actual product is marked differently from the image

shown here.

■ List of Models

■ Dimensions

Note: All units are in millimeters unless otherwise indicated.

■ Terminal Arrangement/Internal Connections (Top View)

■ Actual Mounting Pad Dimensions (Recommended Value, Top View)

Contact form Terminals Load voltage (peak value) Model Number per stick Number per tape

SPST-NO Surface-mounting

terminals

80 VAC G3VM-81G1 100 ---

G3VM-81G1(TR) --- 2,500

4.4±

0.25

3.9±

0.2

0.4±

0.1

2.54±

0.25

2.1 max.

0.1

7.0±

0.4

0.6±

0.3

0.15

G3VM-81G1

Note: The actual product is marked differently from

the image shown here.

Weight: 0.1 g

G3VM-81G1

6 to 6.3

1.2

0.8

2.54

G3VM-81G1

Summary of content (4 pages)

PAGE 1
MOS FET Relays G3VM-81G1 New Relays Incorporating a MOS FET Optically Coupled with an Infrared LED Have a 4-pin SOP Package and 80-V Load Voltage. • Continuous load current of 350 mA. • Dielectric strength of 1,500 Vrms between I/O. RoHS compliant ! Note: ■ Application Examples The actual product is marked differently from the image shown here.
PAGE 2
G3VM-81G1 G3VM-81G1 ■ Absolute Maximum Ratings (Ta = 25°C) Item Input Symbol Rating Unit Measurement Conditions Note: LED forward current IF 50 mA Repetitive peak LED forward current IFP 1 A 100 µs pulses, 100 pps LED forward current reduction rate ∆ IF/°C −0.5 mA/°C Ta ≥ 25°C LED reverse voltage VR 5 V Connection temperature Tj 125 °C Output dielectric strength VOFF 80 V Continuous load current IO 350 mA ON current reduction rate ∆ ION/°C −3.
PAGE 3
G3VM Series G3VM Series Common Precautions !WARNING Be sure to turn OFF the power when wiring the Relay, otherwise an electric shock may be received. !WARNING Do not touch the charged terminals of the SSR, otherwise an electric shock may be received.
PAGE 4
G3VM Series G3VM Series Load Connection Solder Mounting Do not short-circuit the input and output terminals while the relay is operating or the relay may malfunction. Perform solder mounting under the following recommended conditions to prevent the temperature of the Relays from rising. AC Connection Through-hole Mounting (Once Only) Load Solder type DC Single Connection Load Preheating Soldering Lead solder SnPb 150°C 60 to 120 s 230 to 260°C 10 s max.