Datasheet

4
G4W PCB Power Relay
G
4
W
■ Precautions
● Please refer to “PCB Relays Common Precautions” for correct use.
● Mounting
• When mounting more than two Relays
on a PCB, keep the gap as shown in
the following figure.
• No specified mounting direction.
• Not compatible with sockets.
• There is the current-carrying metal
part on the coil terminal.
Do not mount to the PCB with
patterned metal surface.
● Other Precautions
• This Relay is suitable for power load
switching of motors, transformers,
solenoids, lamps, heaters, etc. Do not
use the G4W to switch micro loads
less than 100 mA, such as in signal
applications.
Correct Use
3 mm
min.
3 mm min.
10.16 15.24
1
0.2
5
7
Detail of part
㧭
㧭
The same
current-
carrying
metal part
with the
coil
terminal
• Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product.
• Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad
systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious
influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or
equipment, and be sure to provide the system or equipment with double safety mechanisms.
OMRON Corporation
Electronic and Mechanical Components Company
Contact: www.omron.com/ecb
Cat. No. J039-E1-13
1116(0207)(O)
Note: Do not use this document to operate the Unit.