Datasheet

ManualsBrandsOmron Electronic Components ManualsRelaysSignal Relay G5V-2, 2CO, DC, 12V, 2A, 288Ohm

245

Text

244

Text PCB Signal Relay – G5V-2

High Sensitivity Models

Rated voltage 3 VDC 5 VDC 6 VDC 9 VDC 12 VDC 24 VDC 48 VDC

Rated current 50 mA 30 mA 25 mA 16.7 mA 12.5 mA 8.33 mA 6.25 mA

Coil resistance 60 Ω 166.7 Ω 240 Ω 540 Ω 960 Ω 2,880 Ω 7,680 Ω

0.18 0.46 0.70 1.67 2.90 6.72 20.1

0.57 0.71 0.97 2.33 3.99 9.27 26.7

Must operate voltage 75% max. of rated voltage

Must release voltage 5% min. of rated voltage

Max. voltage 180% of rated voltage at 23°C 150% of

rated voltage

(at 23°C)

Power consumption Approx. 150 mW Approx. Approx.

200 mW 580 mW

Note: 1. The rated current and coil resistance are measured at a coil temperature of 23˚C with a tolerance of ±10%.

2. Operating characteristics are measured at a coil temperature of 23˚C.

3. The maximum voltage is the highest voltage that can be imposed on the relay coil.

Coil inductance Armature OFF

(H) (ref. value) Armature OFF

■

Contact Ratings

Item Standard models High sensitivity models

Load Resistive load (cosϕ = 1)

Rated load 0.5 A at 125 VAC; 2 A at 30 VDC 0.5 A at 125 VAC; 1 A at 24 VDC

Contact material Ag (AU alloy)

Rated carry current 2 A

Max. switching voltage 125 VAC, 125 VDC

Max. switching current 2 A 1 A

Max. switching power 62.5 VA, 60 W 62.5 VA, 24 W

Failure rate (reference value) 0.01 mA at 10 mVDC

Note: P level: λ

= 0.1 x 10

-6

/operation

This value was measured at a switching frequency of 120 operations/min and the criterion of contact resistance is 100Ω. This

value may vary depending on the switching frequency and operating environment. Always double-check relay suitability under

actual operating conditions.

Signal Relays

PCB Signal Relay – G5V-2

Model Number Legend

Miniature Relay for Signal Circuits

■

ROHS compliant.

■

Wide switching power of 10 µA to 2 A.

■

High dielectric strength coil-contacts:1,000

VAC; open contacts: 750 VAC.

■

Conforms to FCC Part 68 requirements.

■

Ag (Au alloy) bifurcated crossbar contacts and

fully sealed for high contact reliability.

■

New 150-mW relays with high-sensitivity.

Rated coil voltage

Note: When ordering, add the rated coil voltage to the model number.

Example: G5NB-1A-E 12 VDC

1. Contact Form

2: DPDT

2. Classification

H1: High-sensitivity

3. Rated Coil Voltage

3, 5, 6, 9, 12, 24, 48 VDC

G5V - - VDC

132

Classification Contact form Contact type Contact material Enclosure Rating Model

Standard DPDT Bifurcated crossbar Ag (Au alloy) Fully sealed G5V-2

High-sensitivity G5V-2-H1

Ordering Information

Specifications

■

Coil Rating

Standard Models

Rated voltage 3 VDC 5 VDC 6 VDC 9 VDC 12 VDC 24 VDC 48 VDC

Rated current 166.7 mA 100 mA 83.3 mA 55.6 mA 41.7 mA 20.8 mA 12 mA

Coil resistance (W) 18 Ω 50 Ω 72 Ω 162 Ω 288 Ω 1,152 Ω 4,000 Ω

0.04 0.09 0.16 0.31 0.47 1.98 7.23

0.05 0.11 0.19 0.49 0.74 2.63 10.00

Must operate voltage 75% max. of rated voltage

Must release voltage 5% min. of rated voltage

Max. voltage 120% of rated voltage at 23°C

Power consumption Approx. 500 mW Approx.

580 mW

Coil inductance Armature OFF

(H) (ref. value) Armature ON

Omron 08 Cat 1-302 5/10/07 15:39 Page 244

Summary of content (5 pages)

PAGE 1
Omron 08 Cat 1-302 5/10/07 15:39 Page 244 PCB Text Signal Relay – G5V-2 Text Signal Relay – G5V-2 PCB Miniature Relay for Signal Circuits High Sensitivity Models ■ ROHS compliant. Rated voltage 3 VDC 5 VDC 6 VDC 9 VDC 12 VDC 24 VDC ■ Wide switching power of 10 µA to 2 A. Rated current 50 mA 30 mA 25 mA 16.7 mA 12.5 mA 8.33 mA 6.25 mA ■ High dielectric strength coil-contacts:1,000 Coil resistance 60 Ω 166.7 Ω 240 Ω 540 Ω 960 Ω 2,880 Ω 7,680 Ω Coil inductance Armature OFF 0.
PAGE 2
Omron 08 Cat 1-302 5/10/07 15:39 Page 244 PCB Text Signal Relay – G5V-2 Text Signal Relay – G5V-2 PCB Miniature Relay for Signal Circuits High Sensitivity Models ■ ROHS compliant. Rated voltage 3 VDC 5 VDC 6 VDC 9 VDC 12 VDC 24 VDC ■ Wide switching power of 10 µA to 2 A. Rated current 50 mA 30 mA 25 mA 16.7 mA 12.5 mA 8.33 mA 6.25 mA ■ High dielectric strength coil-contacts:1,000 Coil resistance 60 Ω 166.7 Ω 240 Ω 540 Ω 960 Ω 2,880 Ω 7,680 Ω Coil inductance Armature OFF 0.
PAGE 3
Omron 08 Cat 1-302 5/10/07 15:39 Page 246 PCB Text Signal Relay – G5V-2 ■ Text Signal Relay – G5V-2 PCB Engineering Data Characteristics Item Standard models High sensitivity models Contact resistance (see note 1) 50 mΩ max. 100 mΩ max. Operate time 7 ms max. Release time 3 ms max. Max. operating frequency Mechanical: 36,000 operations/hr Electrical: 1,800 operations/hr (under rated load) Insulation resistance (see note 2) 1,000 MΩ min.
PAGE 4
Omron 08 Cat 1-302 5/10/07 15:39 Page 246 PCB Text Signal Relay – G5V-2 ■ Text Signal Relay – G5V-2 PCB Engineering Data Characteristics Item Standard models High sensitivity models Contact resistance (see note 1) 50 mΩ max. 100 mΩ max. Operate time 7 ms max. Release time 3 ms max. Max. operating frequency Mechanical: 36,000 operations/hr Electrical: 1,800 operations/hr (under rated load) Insulation resistance (see note 2) 1,000 MΩ min.
PAGE 5
/10/07 15:39 Page 248 PCB Text Signal Relay – G5V-2 Text Signal Relay – G6A PCB Dimensions Fully sealed Relay with High Impulse Dielectric for Use in Telecommunications Equipment Note: 1. All units are in millimetres unless otherwise indicated. 2. Orientation marks are indicated as follows: ■ ROHS compliant. Terminal Arrangement/ Internal Connections (Bottom View) 1 8 4 ■ Horizontal design allows use in 1⁄2 inch PCB racks. Tolerance: ±0.1 (1.3) 7.