Datasheet

245
Text
244
Text PCB Signal Relay – G5V-2
High Sensitivity Models
Rated voltage 3 VDC 5 VDC 6 VDC 9 VDC 12 VDC 24 VDC 48 VDC
Rated current 50 mA 30 mA 25 mA 16.7 mA 12.5 mA 8.33 mA 6.25 mA
Coil resistance 60 Ω 166.7 Ω 240 Ω 540 Ω 960 Ω 2,880 Ω 7,680 Ω
0.18 0.46 0.70 1.67 2.90 6.72 20.1
0.57 0.71 0.97 2.33 3.99 9.27 26.7
Must operate voltage 75% max. of rated voltage
Must release voltage 5% min. of rated voltage
Max. voltage 180% of rated voltage at 23°C 150% of
rated voltage
(at 23°C)
Power consumption Approx. 150 mW Approx. Approx.
200 mW 580 mW
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23˚C with a tolerance of ±10%.
2. Operating characteristics are measured at a coil temperature of 23˚C.
3. The maximum voltage is the highest voltage that can be imposed on the relay coil.
Coil inductance Armature OFF
(H) (ref. value) Armature OFF
■
Contact Ratings
Item Standard models High sensitivity models
Load Resistive load (cosϕ = 1)
Rated load 0.5 A at 125 VAC; 2 A at 30 VDC 0.5 A at 125 VAC; 1 A at 24 VDC
Contact material Ag (AU alloy)
Rated carry current 2 A
Max. switching voltage 125 VAC, 125 VDC
Max. switching current 2 A 1 A
Max. switching power 62.5 VA, 60 W 62.5 VA, 24 W
Failure rate (reference value) 0.01 mA at 10 mVDC
Note: P level: λ
60
= 0.1 x 10
-6
/operation
This value was measured at a switching frequency of 120 operations/min and the criterion of contact resistance is 100Ω. This
value may vary depending on the switching frequency and operating environment. Always double-check relay suitability under
actual operating conditions.
Signal Relays
PCB Signal Relay – G5V-2
Model Number Legend
Miniature Relay for Signal Circuits
■
ROHS compliant.
■
Wide switching power of 10 µA to 2 A.
■
High dielectric strength coil-contacts:1,000
VAC; open contacts: 750 VAC.
■
Conforms to FCC Part 68 requirements.
■
Ag (Au alloy) bifurcated crossbar contacts and
fully sealed for high contact reliability.
■
New 150-mW relays with high-sensitivity.
Rated coil voltage
Note: When ordering, add the rated coil voltage to the model number.
Example: G5NB-1A-E 12 VDC
1. Contact Form
2: DPDT
2. Classification
H1: High-sensitivity
3. Rated Coil Voltage
3, 5, 6, 9, 12, 24, 48 VDC
G5V - - VDC
132
Classification Contact form Contact type Contact material Enclosure Rating Model
Standard DPDT Bifurcated crossbar Ag (Au alloy) Fully sealed G5V-2
High-sensitivity G5V-2-H1
Ordering Information
Specifications
■
Coil Rating
Standard Models
Rated voltage 3 VDC 5 VDC 6 VDC 9 VDC 12 VDC 24 VDC 48 VDC
Rated current 166.7 mA 100 mA 83.3 mA 55.6 mA 41.7 mA 20.8 mA 12 mA
Coil resistance (W) 18 Ω 50 Ω 72 Ω 162 Ω 288 Ω 1,152 Ω 4,000 Ω
0.04 0.09 0.16 0.31 0.47 1.98 7.23
0.05 0.11 0.19 0.49 0.74 2.63 10.00
Must operate voltage 75% max. of rated voltage
Must release voltage 5% min. of rated voltage
Max. voltage 120% of rated voltage at 23°C
Power consumption Approx. 500 mW Approx.
580 mW
Coil inductance Armature OFF
(H) (ref. value) Armature ON
Omron 08 Cat 1-302 5/10/07 15:39 Page 244