Brochure

Technical Information – Relays

PCB Relays

Cleaning

Boiling cleaning and immersion cleaning are recommended.

Ultrasonic cleaning will have an adverse effect on the performance of relays not specifically manufactured for ultrasonic cleaning.

List of Cleaning Solvent

Note: 1. Consult your OMRON representative before using any other cleaning solvent. Do not use Freon-TMC-based, thinner-based, or

gasoline-based cleaning solvents.

2. Worldwide efforts are being made at discontinuing the use of CFC-113-based (fluorochlorocarbon-based) and trichloroethylene-

based cleaning solvents. The user is requested to refrain from using these cleaning solvents

3. It may be difficult to clean the space between the relay and PCB using hydrogen-based or alcohol–based cleaning solvent. It is

recommended the stand-off-type be used G6A- -ST when using hydrogen-based or alcohol-based cleaning solvents.

4. Ultrasonic cleaning may have an adverse effect on the performance of relays not specifically manufactured for ultrasonic

cleaning. Please refer to the model number to determine if your relay is intended to be cleaned ultrasonically.

Chlorine-based Perochlene Yes

Chlorosolder

Trichloroethylene

Water-based Indusco Yes

Holys

Alcohol-based IPA Yes

Ethanol

Others Thinner No

Gasoline

Cleaning method Automatic cleaning

Ultrasonic cleaning (see note 4)

Solvent Fully Seated

Omron A5 Catalogue 2007 1-282 11/9/06 10:16 am Page 31