Datasheet

G9TB AC Power Latching Relay

G9TB

Safety Precautions

• Please refer to "PCB Relays Common Precautions" for correct use.

Installation

• The relay contacts are polarized. Incorrect wiring may cause a

failure to break the circuit. Wire the Relay with care.

• Install the Relays in locations that are as dry as possible and

have as little dust, dirt, and harmful gas.

• Using the Relay under high temperature, high humidity, or

harmful gas may deteriorate its performance characteristics

due to condensation or corrosive materials, resulting in failure

or burn damage to the Relay.

Relay Service Life

• The electrical durability of these Relays is specified as the

number of load switching operations under a resistive load and

OMRON-specified standard testing conditions.

The coil drive circuit, ambient environment, switching

frequency, or load conditions (e.g., inductive load or capacitor

load) may reduce the service life and possibly lead to failure to

break. Always confirm the service life in the actual equipment.

Wiring

• Be sure to tighten all screws to the appropriate torque given below.

• Loose screws may result in burning due to abnormal heat generation during energization.

• M8 screws : 8.82 to 9.80 N·m

• Use a spring washer in order to prevent deformation and it from loosening.

• Allow suitable slack on leads when wiring, and do not apply excessive force to the terminals.

Correct Use

Please check each region's Terms & Conditions by region website.

OMRON Corporation

Electronic and Mechanical Components Company

Regional Contact

Cat. No. J221-E1-02

0319(0318)

Americas Europe

https://www.components.omron.com/ http://components.omron.eu/

Asia-Pacific China

https://ecb.omron.com.sg/ https://www.ecb.omron.com.cn/

Korea Japan

https://www.omron-ecb.co.kr/ https://www.omron.co.jp/ecb/

In the interest of product improvement, specifications are subject to change without notice.