Datasheet

ManualsBrandsOmron Electronic Components ManualsMicroswitchesMicro Switch SS, 5A, 1CO, 1.47N, Hinge Lever

617

Text

616

Text

Miniature Basic Switch (Non-Sealed) – SS

Consult your Omron representative for details on SPST-NO and SPST-NC models.

Model Rated voltage Resistive load

SS-10 250VAC 10.1A

SS-5 125VAC 5A

250VAC 3A

SS-01 125VAC 0.1A

30VDC 0.1A

■

Ratings

Sub-Miniature Basic Switch (Non-Sealed) – SS

Economical, Subminiature Basic

Switch Offers Long Life (30,000

Operations)

■

ROHS Compliant.

■

Incorporating simple and stable two split springs

which ensures a long service life (30,000,000

operations).

■

A variety of models with low operating force to

high operating force are available.

■

Solder, quick-connect terminals (#110) and PCB

terminals are available.

Non-Sealed Microswitches

1. Ratings

01: 0.1A at 30VDC

5: 5A at 125VAC

10: 10.1A at 250VAC

2. Actuator

None: Pin plunger

GL: Hinge lever

GL13: Simulated roller lever

GL2: Hinge roller lever

3. Operating Force (at Pin Plunger)

None: 1.47N (150gf)

-F: 0.49N (50gf) (0.1A, 5A)

-E: 0.25N (25gf) (0.1A)

Note 1: These values are for the pin plunger model.

Note 2: The PCB terminal has a right-angle terminal option.

D1: Left angle terminal

D2: Right angle terminal

Note 3: When suffice “-T” is placed after the model number,

the model withstands high temperatures (-25˚C to

120˚C).

4. Contact Form

None: SPDT

-2: SPST-NC

-3: SPST-NO

5. Terminals

None: Solder

T: Quick-connect terminals (#110)

D: PCB (see Note 2)

Omron 08 Cat 565-773 5/10/07 15:57 Page 616

Summary of content (8 pages)

PAGE 1
Omron 08 Cat 565-773 5/10/07 15:57 Page 616 Text Miniature Basic Switch (Non-Sealed) – SS Text Sub-Miniature Basic Switch (Non-Sealed) – SS Economical, Subminiature Basic Switch Offers Long Life (30,000 Operations) ■ ROHS Compliant. ■ Incorporating simple and stable two split springs which ensures a long service life (30,000,000 operations). ■ A variety of models with low operating force to high operating force are available. ■ Solder, quick-connect terminals (#110) and PCB 1. Ratings 01: 0.
PAGE 2
Omron 08 Cat 565-773 5/10/07 15:57 Page 616 Text Miniature Basic Switch (Non-Sealed) – SS Text Sub-Miniature Basic Switch (Non-Sealed) – SS Economical, Subminiature Basic Switch Offers Long Life (30,000 Operations) ■ ROHS Compliant. ■ Incorporating simple and stable two split springs which ensures a long service life (30,000,000 operations). ■ A variety of models with low operating force to high operating force are available. ■ Solder, quick-connect terminals (#110) and PCB 1. Ratings 01: 0.
PAGE 3
5/10/07 15:57 Page 618 Text Miniature Basic Switch (Non-Sealed) – SS Text Miniature Basic Switch (Non-Sealed) – SS Note: 1. The data given above are initial values 2. The dielectric strength shown in the table indicates a value for models with a Separator. 3. For the pin plunger models, the above values apply for useat both the free position and total travel position. For the lever models, they apply at the total travelposition. 4. Lever-type models.
PAGE 4
5/10/07 15:57 Page 618 Text Miniature Basic Switch (Non-Sealed) – SS Text Miniature Basic Switch (Non-Sealed) – SS Note: 1. The data given above are initial values 2. The dielectric strength shown in the table indicates a value for models with a Separator. 3. For the pin plunger models, the above values apply for useat both the free position and total travel position. For the lever models, they apply at the total travelposition. 4. Lever-type models.
PAGE 5
Omron 08 Cat 565-773 5/10/07 15:57 Page 620 Text Miniature Basic Switch (Non-Sealed) – SS Text Miniature Basic Switch (Non-Sealed) – SS SPST-NC SPST-NO Non-Sealed Microswitches SPDT Note: The values indicated in parenthesis are reference values for cases when the installation direction is such that the lever weight is not applied to the plunger.
PAGE 6
Omron 08 Cat 565-773 5/10/07 15:57 Page 620 Text Miniature Basic Switch (Non-Sealed) – SS Text Miniature Basic Switch (Non-Sealed) – SS SPST-NC SPST-NO Non-Sealed Microswitches SPDT Note: The values indicated in parenthesis are reference values for cases when the installation direction is such that the lever weight is not applied to the plunger.
PAGE 7
Omron 08 Cat 565-773 5/10/07 15:57 Page 622 Text Miniature Basic Switch (Non-Sealed) – SS Text Miniature Basic Switch (Non-Sealed) – SS Mounting Terminal Connection Turn OFF the power supply before mounting or removing the switch, wiring, or performing maintenance or inspection. Failure to do so may result in electric shock or burning. When soldering the lead wire to the terminal, first insert the lead wire conductor through the terminal hole and then conduct soldering. Use two M2.
PAGE 8
Omron 08 Cat 565-773 5/10/07 15:57 Page 622 Text Miniature Basic Switch (Non-Sealed) – SS Text Miniature Basic Switch (Non-Sealed) – SS Mounting Terminal Connection Turn OFF the power supply before mounting or removing the switch, wiring, or performing maintenance or inspection. Failure to do so may result in electric shock or burning. When soldering the lead wire to the terminal, first insert the lead wire conductor through the terminal hole and then conduct soldering. Use two M2.