Datasheet

10
V Miniature Basic Switch
V
Contact Specifications
Ratings
Note. The above rating values apply under the following test conditions.
(1) Ambient temperature: 20±2°C
(2) Ambient humidity: 65±5% RH
(3) Operating frequency: 30 operations/min
Approved Standards
UL (UL1054)/CSA (CSA C22.2 No.55)
VDE (EN61058-1)
Consult your OMRON sales representative for specific models
with VDE approvals.
Testing conditions: 5E4 (50,000 operations), for models of V-21:
T80 (0 to 80°C), for models of V-16: T105 (0 to 105°C)
Characteristics
Note. The data given above are initial values.
*1. The dielectric strength shown in the table indicates a value for models with a Separator.
*2. For the pin plunger models, the above values apply for use at the free position and total travel position. For the lever models, they apply at the total travel position.
Close or open circuit of the contact is shorter than 1 ms.
*3. For testing conditions, consult your OMRON sales representative.
Item Model V-21 V-16 V-15 V-10
Contact
Specification Rivet
Material Silver alloy Silver
Gap (standard value) 1 mm
Inrush
current
NC
50 A
max.
40 A
max.
30 A
max.
24 A
max.
NO
Minimum applicable load
(reference value)
DC5V 160mA
Model
Item
Rated voltage
Resistive load
V-21
AC250V 21 A
DC125V
DC250V
0.6 A
0.3 A
V-16
AC250V 16 A
DC125V
DC250V
0.6 A
0.3 A
V-15
AC250V 15 A
DC125V
DC250V
0.6 A
0.3 A
V-10
AC250V 10 A
DC125V
DC250V
0.6 A
0.3 A
Rated voltage Model V-21 V-16 V-15 V-10
125 VAC
250 VAC
21A 1/2HP 16A 1/2HP 15A 1/2HP 10A 1/2HP
125 VDC
250 VDC
0.6A
0.3A
Rated voltage Model V-21 V-16
AC250V 20(4)A 16(4)A
Item Model V-10 V-15 V-16 V-21
Permissible operating speed 0.1mm to 1 m/s max. (pin plunger models)
Permissible operating
frequency
Mechanical 600 operations/min max. (pin plunger models)
Electrical 60 operations/min
Insulation resistance 100MΩ min. (at 500 VDC with insulation tester)
Contact resistance (initial value) 15mΩ max.
Dielectric strength *1
Between terminals of the
same polarity
AC1,000V 50/60Hz 1min
Between current-carrying
metal parts and ground
AC1,500V 50/60Hz 1min AC1,500V 50/60Hz 1min AC2,000V 50/60Hz 1min
Between each terminals and
non-current-carrying metal
parts
AC1,500V 50/60Hz 1min AC1,500V 50/60Hz 1min AC2,000V 50/60Hz 1min
Vibration resistance *2 Malfunction 10 to 55 Hz, 1.5-mm double amplitude
Shock resistance *2
Durability 1,000 m/s
2
{approx. 100 G} max.
Malfunction
200 m/s
2
{approx. 20G} max.
300 m/s
2
{approx. 30 G} max.
Durability *3
Mechanical 50,000,000 operations min. (60 operations/min)
Electrical
300,000 operations min.
(30 operations/min)
Heat resistive: 50,000
operations min
(30 operations/min)
100,000 operations min.
(30 operations/min)
Heat resistive: 20,000
operations min
(30 operations/min)
100,000 operations min.
(30 operations/min)
Degree of protection IEC IP40
Degree of protection against electric shock Class I
Proof tracking index (PTI) 175
Ambient operating temperature
-25 to 105°C
(Heat resistive: -25 to 150°C)
-25 to 105°C
-25 to 80°C
(at ambient humidity of 60% max.) (with no icing or condensation)
Ambient operating humidity 85% max. (for 5 to 35°C)
Weight Approx. 6.2g (pin plunger models)