Datasheet

14 Flat Cable Connectors XG4
■ Ordering Information
IDC Plugs
Use Long-lock Plugs together with Strain-relief Sockets, and use Short-lock Plugs together with Non-strain-relief Sockets.
Note: 1. Strain Relief sold separately.
2. Polarity slot pitch is 22.86 mm.
■ Cable Number and Contact Position
No. of
contacts
No. of
polarizing
slots
Long-lock Plugs with Open-end Covers
(See note 1.)
Short-lock Plugs with Open-end Covers
(See note 1.)
Strain Reliefs for XG4E
10 0 XG4E-1071 XG4E-1072 XG4S-1004
1 XG4E-1031 XG4E-1032
14 1 XG4E-1431 XG4E-1432 XG4S-1404
16 1 XG4E-1631 XG4E-1632 XG4S-1604
20 1 XG4E-2031 XG4E-2032 XG4S-2004
26 1 XG4E-2631 XG4E-2632 XG4S-2604
30 1 XG4E-3031 XG4E-3032 XG4S-3004
34 1 XG4E-3431 XG4E-3432 XG4S-3404
40 1 XG4E-4031 XG4E-4032 XG4S-4004
50 1 XG4E-5031 XG4E-5032 XG4S-5004
2 (See note 2.) XG4E-5071 XG4E-5072
60 1 XG4E-6031 XG4E-6032 XG4S-6004
2 (See note 2.) XG4E-6071 XG4E-6072
64 1 XG4E-6431 XG4E-6432 XG4S-6404
2 (See note 2.) XG4E-6471 XG4E-6472
Socket (mated side) Right-angle Terminal Plug (terminal side)
Plug (XG4E) Straight Terminal Plug (terminal side)
Triangular mark
Cable mark
Cable No.
XG4A XG4C
Triangular mark
(back)
Triangular mark
Triangular mark
Cable mark
Cable No.
Cable and Corresponding
Contact Number
The contact numbers are not marked on
the Connector. Use the triangular mark as
a guide when wiring and designing circuit
boards.
For the cable number, count starting from
the cable mark side as shown on the right.