Datasheet

Flat Cable Connectors XG4 5
XG4A MIL Plugs with Long Locks (MIL Standards)
■ Dimensions (Unit: mm)
Straight DIP terminals Right-angle DIP terminals
0.635 × 0.635
0.635 × 0.635
Straight DIP terminals Right-angle DIP terminals
Two, 2.6 dia.
(M3 tapping screw hole)
Two, 2.65 dia.
Triangular
mark
Polarizing Key slot
(not on models with
less than 14 contacts)
Polarity slot
Polarizing Key slot
Mounting view (bottom view)
Right-angle terminals
0.8
+0.1
dia. (DIP terminals)
0
Two, 2.8 dia.
(M2.6)
Two, 3.2 dia.
(M3 tapping
screw hole)
Straight terminals
0.8
+0.1
dia. (DIP terminals)
0
Two, 3.2 dia.
(M3 tapping
screw hole)
XG4A-@@31/-@@71 (With straight DIP terminals)
XG4A-@@34/-@@74 (With right-angle DIP terminals)
Dimensions
Note: See page 16 for details on the availability (10-contact Connectors)
and pitch (with 50, 60, or 64-contact Connectors) of
polarity slots.
No. of
contacts
Dimensions (mm)
ABCDEF
10 32.0 17.5 10.16 21.8 27.9 46.4
14 37.1 22.6 15.24 26.9 33.0 51.5
16 39.6 25.2 17.78 29.5 35.6 54.1
20 44.7 30.2 22.86 34.5 40.6 59.1
26 52.3 37.9 30.48 42.2 48.3 66.8
30 57.4 42.9 35.56 47.2 53.3 71.8
34 62.5 48.0 40.64 52.3 58.4 76.9
40 70.1 55.6 48.26 59.9 66.0 84.5
50 82.8 68.3 60.96 72.6 78.7 97.2
60 95.5 81.0 73.66 85.3 91.4 109.9
64 100.6 86.1 78.74 90.4 96.5 115.0