Manual

FREQUENTLY ASKED QUESTIONS
Q. Why are my blood pressure readings sometimes different?
A. Your blood pressure changes constantly based on your daily activities
and time of day. Because of this, some fluctuations can be expected.
That’s why it is important to use averages over time to compare
readings. Because each person is different, it’s important to consult
with your doctor about what your numbers mean to you.
Q. Why could my doctor’s reading be different than my readings
taken at home?
A. Having your blood pressure measured by a healthcare professional in
a doctor’s office can cause nervousness and may result in an elevated
reading. Because these readings can vary considerably, you should take
your blood pressure on a regular basis at home and share your results
with your healthcare provider.
Insert two AAA batteries into compartment below monitor.
For accurate results, sit with feet flat on floor and rest for 15 minutes before taking measurements.
Do not measure within 30 minutes after eating, exercising, bathing, smoking or drinking alcohol.
DATE AND TIME SETTING OPTION
To Set Date and Time Go To A. Or To Bypass Date and Time Go To B.
A
Press START/STOP button once. The year will flash. Press MEM button to advance
to current year, then press SET to confirm. Change month, day and time the same way.
Unit will shut off when complete.
B Press START/STOP button to turn unit on. The year will flash. Press START/STOP again
to turn unit off. You have now bypassed setting the Date and Time. Go to STEP 3.
For more information on date and time setting, see pages 18-20 in the instruction manual.
To turn the unit on and take a measurement, press
START/STOP button once. The monitor will
start beeping. Holding left elbow and arm against body, elevate cuffed wrist to heart level (as
shown). The monitor will beep faster as you get closer to the HEART ZONE. Four slow beeps will
sound when in the correct position. Please note: cuff will not begin inflating until correct position
is reached. This is to ensure that you get an accurate reading.
Hold still until cuff deflates and results are displayed. Press START/STOP to turn off monitor.
Secure cuff on left wrist and align monitor with thumb as shown.
Place cuff 1/2 inch away from wristbone.
To use on right wrist, See page 17 in instruction manual.
The American Heart Association’s guideline for upper limit of normal home blood pressure is
1
:
Please read the instruction manual for complete product information. Call our Toll-Free Consumer Help Line at 800-634-4350 for assistance with
your Omron product.
WWW.OMRONHEALTHCARE.COM
1. Hypertension. 2008;52:10-29.
135
mmHg
systolic
85
mmHg
diastolic
STEP
1
STEP
2
STEP
3
STEP
4
Q. Why doesn’t this unit give me a reading unless it’s
in a specific position?
A. This Omron wrist monitor includes APS® (Advanced
Positioning Sensor) which means it will only measure
when it is correctly positioned at heart level. It will
not allow you to take your measurement outside of
this “Heart Zone.” This ensures that you will get an
accurate reading.
1
/
2
"
START
STOP
MEM
SET
GETTING STARTED
DELUXE WRIST BLOOD PRESSURE MONITOR
HEM-650