Datasheet

A22NE-PD
16
A22NE-PD A22NE-P A22E Common Note
Common Accessories and Tools
Removing the Switch Unit Installing the LED Lamp (Lighted Models)
When the Switch Unit is to be Removed
Slowly push the release port (concave part) of the lock lever with a
screwdriver to release the lock. The lock lever moves to the release position.
When the lock lever is at the released position in this Switch, the NO and NC
contact operation is reversed.
Set the lock lever to the locked position when using the Switch.
Locked positionRelease position
Lock lever concave part
<Lock lever position>
When the LED Lamp is to be Installed
Insert the protrusions on the LED Lamp into the guides on the Switch Unit in
direction (1), and then turn the LED Lamp in direction (2) to lock it in place.
2
1