Datasheet

ManualsBrandsOmron Industrial Automation ManualsAutomationOutput Unit 32DO 24VDC

CSM_CJ1W-OUTPUT_DS_E_8_1

CJ-series Output Units

CJ1W-OC/OA/OD

A Wide Range of Basic Output

Units for High Speed Output

and Different Applications

• These Output Units receive the results of

output instructions from the CPU Unit and

perform ON/OFF control for external devices.

• High-speed Output models CJ1W-OD213 and

CJ1W-OD234 can help to increase system

throughput.

Features

• High-speed output models are available, meeting versatile applications.

ON Response Time: 15μs, OFF Response Time: 80μs

• Output Units are available with any of three output types: relay contact outputs, triac outputs, or transistor outputs.

• For transistor outputs, select from sinking outputs or sourcing outputs.

• Output Units with load short-circuit protection are also available. *1

• Select the best interface for each application: Fujitsu connectors or MIL connectors. *2

• A wide variety of Connector-Terminal Block Conversion Units are available to allow you to easily wire external output devices.

*1. The following Units have load short-circuit protection: CJ1W-OC202, CJ1W-OD204, CJ1W-OD212, and CJ1W-OD232.

*2. Available for models with 32 outputs or 64 outputs

CJ1W-OD213 CJ1W-OD234

Summary of content (37 pages)

PAGE 1
CJ-series Output Units CJ1W-OC/OA/OD CSM_CJ1W-OUTPUT_DS_E_8_1 A Wide Range of Basic Output Units for High Speed Output and Different Applications • These Output Units receive the results of output instructions from the CPU Unit and perform ON/OFF control for external devices. • High-speed Output models CJ1W-OD213 and CJ1W-OD234 can help to increase system throughput. CJ1W-OD213 CJ1W-OD234 Features • High-speed output models are available, meeting versatile applications.
PAGE 2
CJ1W-OC/OA/OD Ordering Information International Standards • The standards are abbreviated as follows: U: UL, U1: UL (Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus, UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, and CE: EC Directives. • Contact your OMRON representative for further details and applicable conditions for these standards. Output Units Unit type Product name Specifications Current consumption No.
PAGE 3
CJ1W-OC/OA/OD Applicable Connectors Fujitsu Connectors for 32-input, 32-output, 64-input, 64-output, 32-input/32-output, and 16-input/16-output Units Name 40-pin Connectors 24-pin Connectors Connection Remarks Applicable Units Soldered FCN-361J040-AU FCN-360C040-J2 Connector Connector Cover Crimped FCN-363J040 FCN-363J-AU FCN-360C040-J2 Housing Contactor Connector Cover Pressure welded FCN-367J040-AU/F Soldered FCN-361J024-AU FCN-360C024-J2 Connector Connector Cover Crimped FCN-363J024 FCN
PAGE 4
CJ1W-OC/OA/OD Applicable I/O Relay Terminals Size (horizontal mounting) Specifications Type Series Classification Polarity Relay outputs Vertical type G70D-V MOSFET NPN relay outputs Number of points Rated ON current at contacts 5A or 3A 16 (SPSTNO × 16) 0.
PAGE 5
CJ1W-OC/OA/OD Mountable Racks NJ system Model CJ system (CJ1, CJ2) CPU Rack Expansion Rack CPU Rack Expansion Backplane 10 Units 10 Units (Per Expansion Rack) 10 Units 10 Units (Per Expansion Backplane) CP1H system NSJ system CP1H PLC NSJ Controller Expansion Backplane Not Supported Not Supported 10 Units (Per Expansion Backplane) CJ1W-OC201 CJ1W-OC211 CJ1W-OA201 CJ1W-OD201 CJ1W-OD203 CJ1W-OD211 CJ1W-OD213 CJ1W-OD231 CJ1W-OD233 CJ1W-OD234 CJ1W-OD261 CJ1W-OD263 CJ1W-OD202 CJ1W-OD204 CJ1W-O
PAGE 6
CJ1W-OC/OA/OD Specifications CJ1W-OC201 Contact Output Unit (Independent Relays, 8 Points) Name 8-point Contact Output Unit with Terminal Block (Independent Relays) Model CJ1W-OC201 Max. Switching Capacity 2 A 250 VAC (cosφ = 1), 2 A 250 VAC (cosφ = 0.4), 2 A 24 VDC (16 A/Unit) Min. Switching Capacity 1 mA 5 VDC Relays NY-24W-K-IE (Fujitsu Takamizawa Components, Ltd.), Cannot be replaced.
PAGE 7
CJ1W-OC/OA/OD CJ1W-OC211 Contact Output Unit (16 Points) Name 16-point Contact Output Unit with Terminal Block Model CJ1W-OC211 Max. Switching Capacity 2 A 250 VAC (cosφ = 1), 2 A 250 VAC (cosφ = 0.4), 2 A 24 VDC (8 A/Unit) Min. Switching Capacity 1 mA 5 VDC Relays NY-24W-K-IE (Fujitsu Takamizawa Components, Ltd.), Cannot be replaced. Service Life of Relay Electrical: 150,000 operations (24 VDC, resistive load)/ 100,000 operations (250 VAC, cosφ = 0.
PAGE 8
CJ1W-OC/OA/OD CJ1W-OA201 Triac Output Unit (8 Points) Name 8-point Triac Output Unit with Terminal Block Model CJ1W-OA201 Max. Switching Capacity 0.6 A 250 VAC, 50/60 Hz (2.4 A/Unit) Max. Inrush Current 15 A (pulse width: 10 ms max.) Min. Switching Capacity 50 mA 75 VAC Leakage Current 1.5 mA (200 VAC) max. Residual Voltage 1.6 VAC max. ON Response Time 1 ms max. OFF Response Time 1/2 of load frequency + 1 ms or less. Number of Circuits 8 (8 points/common, 1 circuit) Surge Protector C.
PAGE 9
CJ1W-OC/OA/OD CJ1W-OD201 Transistor Output Unit (8 Points) Name 8-point Transistor Output Unit with Terminal Block (Sinking Outputs) Model CJ1W-OD201 Rated Voltage 12 to 24 VDC Operating Load Voltage Range 10.2 to 26.4 VDC Maximum Load Current 2.0 A/point, 8.0 A/Unit Maximum Inrush Current 10 A/point, 10 ms max. Leakage Current 0.1 mA max. Residual Voltage 1.5 V max. ON Response Time 0.5 ms max. OFF Response Time 1.0 ms max.
PAGE 10
CJ1W-OC/OA/OD CJ1W-OD203 Transistor Output Unit (8 Points) Name 8-point Transistor Output Unit with Terminal Block (Sinking Outputs) Model CJ1W-OD203 Rated Voltage 12 to 24 VDC Operating Load Voltage Range 10.2 to 26.4 VDC Maximum Load Current 0.5 A/point, 4.0 A/Unit Maximum Inrush Current 4.0 A/point, 10 ms max. Leakage Current 0.1 mA max. Residual Voltage 1.5 V max. ON Response Time 0.1 ms max. OFF Response Time 0.8 ms max.
PAGE 11
CJ1W-OC/OA/OD CJ1W-OD211 Transistor Output Unit (16 Points) Name 16-point Transistor Output Unit with Terminal Block (Sinking Outputs) Model CJ1W-OD211 Rated Voltage 12 to 24 VDC Operating Load Voltage Range 10.2 to 26.4 VDC Maximum Load Current 0.5 A/point, 5.0 A/Unit Maximum Inrush Current 4.0 A/point, 10 ms max. Leakage Current 0.1 mA max. Residual Voltage 1.5 V max. ON Response Time 0.1 ms max. OFF Response Time 0.8 ms max.
PAGE 12
CJ1W-OC/OA/OD CJ1W-OD213 Transistor Output Unit (16 Points) Name 16-point Transistor Output Unit with Terminal Block (Sinking Outputs) Model CJ1W-OD213 Rated Voltage 24 VDC Operating Load Voltage Range 20.4 to 26.4 VDC Maximum Load Current 0.5 A/point, 5.0 A/Unit Maximum Inrush Current 4.0 A/point, 10 ms max. Leakage Current 0.1 mA max. Residual Voltage 1.5 V max. ON Response Time 15 μs max. OFF Response Time 80 μs max.
PAGE 13
CJ1W-OC/OA/OD CJ1W-OD231 Transistor Output Unit (32 Points) Name Model Rated Voltage Operating Load Voltage Range Maximum Load Current Maximum Inrush Current Leakage Current Residual Voltage ON Response Time OFF Response Time Insulation Resistance Dielectric Strength Number of Circuits Internal Current Consumption Fuse External Power Supply Weight Accessories 32-point Transistor Output Unit with Fujitsu Connector (Sinking Outputs) CJ1W-OD231 12 to 24 VDC 10.2 to 26.4 VDC 0.5 A/point, 2.0 A/common, 4.
PAGE 14
CJ1W-OC/OA/OD CJ1W-OD233 Transistor Output Unit (32 Points) Name Model Rated Voltage Operating Load Voltage Range Maximum Load Current Maximum Inrush Current Leakage Current Residual Voltage ON Response Time OFF Response Time Insulation Resistance Dielectric Strength Number of Circuits Internal Current Consumption Fuse External Power Supply Weight 32-point Transistor Output Unit with MIL Connector (Sinking Outputs) CJ1W-OD233 12 to 24 VDC 10.2 to 26.4 VDC 0.5 A/point, 2 A/common, 4 A/Unit 4.
PAGE 15
CJ1W-OC/OA/OD CJ1W-OD234 Transistor Output Unit (32 Points) Name Model Rated Voltage Operating Load Voltage Range Maximum Load Current Maximum Inrush Current Leakage Current Residual Voltage ON Response Time OFF Response Time Insulation Resistance Dielectric Strength Number of Circuits Internal Current Consumption Fuse External Power Supply Weight 32-point Transistor Output Unit with MIL Connector (Sinking Outputs) CJ1W-OD234 24 VDC 20.4 to 26.4 VDC 0.5 A/point, 2 A/common, 4 A/Unit 4.0 A/point, 10 ms max.
PAGE 16
CJ1W-OC/OA/OD CJ1W-OD261 Transistor Output Unit (64 Points) Name 64-point Transistor Output Unit with Fujitsu Connectors (Sinking Outputs) Model CJ1W-OD261 Rated Voltage 12 to 24 VDC Operating Load Voltage Range 10.2 to 26.4 VDC Maximum Load Current 0.3 A/point, 1.6 A/common, 6.4 A/Unit Maximum Inrush Current 3.0 A/point, 10 ms max. Leakage Current 0.1 mA max. Residual Voltage 1.5 V max. ON Response Time 0.5 ms max. OFF Response Time 1.0 ms max.
PAGE 17
CJ1W-OC/OA/OD Jxx_Ch2_Out14 Wd m+1 L L B17 A17 Jxx_Ch2_Out12 L Jxx_Ch2_Out10 L Jxx_Ch2_Out09 Jxx_Ch2_Out08 +V External connection and terminal-device variable diagram COM1 L Jxx_Ch2_Out07 L Jxx_Ch2_Out06 L Jxx_Ch2_Out05 12 to 24 VDC L L L L L Jxx_Ch1_Out14 Jxx_Ch2_Out04 Jxx_Ch2_Out03 Jxx_Ch2_Out02 Jxx_Ch2_Out01 Jxx_Ch2_Out00 L L L L Jxx_Ch1_Out12 L B14 A14 12 to 24 VDC L L L L L Jxx_Ch1_Out11 Jxx_Ch2_Out11 L Jxx_Ch1_Out15 Jxx_Ch1_Out13 B15 A15 L COM0 B16 A16 Jxx_Ch2_Out13 L
PAGE 18
CJ1W-OC/OA/OD CJ1W-OD263 Transistor Output Unit (64 Points) Name 64-point Transistor Output Unit with MIL Connectors (Sinking Outputs) Model CJ1W-OD263 Rated Voltage 12 to 24 VDC Operating Load Voltage Range 10.2 to 26.4 VDC Maximum Load Current 0.3 A/point, 1.6 A/common, 6.4 A/Unit Maximum Inrush Current 3.0 A/point, 10 ms max. Leakage Current 0.1 mA max. Residual Voltage 1.5 V max. ON Response Time 0.5 ms max. OFF Response Time 1.0 ms max.
PAGE 19
CJ1W-OC/OA/OD Jxx_Ch1_Out01 L Jxx_Ch1_Out02 L Jxx_Ch1_Out03 L Jxx_Ch1_Out04 L Jxx_Ch1_Out05 L Jxx_Ch1_Out06 L Jxx_Ch1_Out07 COM0 External connection and terminal-device variable diagram Wd m+1 +V L Jxx_Ch2_Out00 L Jxx_Ch2_Out01 L Jxx_Ch2_Out02 L Jxx_Ch2_Out03 L Jxx_Ch2_Out04 L Jxx_Ch2_Out05 L Jxx_Ch2_Out06 L Jxx_Ch2_Out07 COM1 +V 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 Jxx_Ch1_Out08 Jxx_Ch1_Out09 Jxx_Ch1_Out10 Jxx_Ch1_Out11 Jxx_Ch1_Out12 Jxx_Ch1_Out13 Jx
PAGE 20
CJ1W-OC/OA/OD CJ1W-OD202 Transistor Output Unit (8 Points) Name 8-point Transistor Output Unit with Terminal Block (Sourcing Outputs) Model CJ1W-OD202 Rated Voltage 24 VDC Operating Load Voltage Range 20.4 to 26.4 VDC Maximum Load Current 2 A/point, 8 A/Unit Leakage Current 0.1 mA max. Residual Voltage 1.5 V max. ON Response Time 0.5 ms max. OFF Response Time 1.0 ms max. Load Short-circuit Protection Detection current: 6 A min. Automatic restart after error clearance.
PAGE 21
CJ1W-OC/OA/OD CJ1W-OD204 Transistor Output Unit (8 Points) Name 8-point Transistor Output Unit with Terminal Block (Sourcing Outputs) Model CJ1W-OD204 Rated Voltage 24 VDC Operating Load Voltage Range 20.4 to 26.4 VDC Maximum Load Current 0.5 A/point, 4.0 A/Unit Leakage Current 0.1 mA max. Residual Voltage 1.5 V max. ON Response Time 0.5 ms max. OFF Response Time 1.0 ms max. Load Short-circuit Protection Detection current: 0.7 to 2.5 A Automatic restart after error clearance.
PAGE 22
CJ1W-OC/OA/OD CJ1W-OD212 Transistor Output Unit (16 Points) Name 16-point Transistor Output Unit with Terminal Block (Sourcing Outputs) Model CJ1W-OD212 Rated Voltage 24 VDC Operating Load Voltage Range 20.4 to 26.4 VDC Maximum Load Current 0.5 A/point, 5.0 A/Unit Maximum Inrush Current 0.1 mA max. Leakage Current 1.5 V max. ON Response Time 0.5 ms max. OFF Response Time 1.0 ms max. Load Short-circuit Protection Detection current: 0.7 to 2.5 A Automatic restart after error clearance.
PAGE 23
CJ1W-OC/OA/OD CJ1W-OD232 Transistor Output Unit (32 Points) Name 32-point Transistor Output Unit with MIL Connector (Sourcing Outputs) Model CJ1W-OD232 Rated Voltage 24 VDC Operating Load Voltage Range 20.4 to 26.4 VDC Maximum Load Current 0.5 A/point, 2.0 A/common, 4.0 A/Unit Leakage Current 0.1 mA max. Residual Voltage 1.5 V max. ON Response Time 0.5 ms max. OFF Response Time 1.0 ms max. Load Short-circuit Protection Detection current: 0.7 to 2.
PAGE 24
CJ1W-OC/OA/OD Connector pin 24 VDC COM1 (+V) 0V L Wd m+1 L Jxx_Ch2_Out15 Jxx_Ch2_Out14 L Jxx_Ch2_Out13 L Jxx_Ch2_Out12 L L L L Jxx_Ch2_Out11 Jxx_Ch2_Out10 Jxx_Ch2_Out09 Jxx_Ch2_Out08 COM0 (+V) 0V External connection and terminal-device variable diagram L L Wd m L L L L L L 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Allocated CIO word Signal name COM1 (+V) 0V Jxx_Ch2_Out07 Jxx_Ch2_Out06 L L Jxx_Ch2_Out05 L Jxx_Ch2_Out04 L Jxx_Ch2_Out03 Jxx_Ch2_Out02 Jxx_
PAGE 25
CJ1W-OC/OA/OD CJ1W-OD262 Transistor Output Unit (64 Points) Name 64-point Transistor Output Unit with MIL Connectors (Sourcing Outputs) Model CJ1W-OD262 Rated Voltage 12 to 24 VDC Operating Load Voltage Range 10.2 to 26.4 VDC Maximum Load Current 0.3 A/point, 1.6 A/common, 6.4 A/Unit Maximum Inrush Current 3.0 A/point, 10 ms max. Leakage Current 0.1 mA max. Residual Voltage 1.5 V max. ON Response Time 0.5 ms max. OFF Response Time 1.0 ms max.
PAGE 26
CJ1W-OC/OA/OD CN1 Jxx_Ch1_Out02 L L L L L Jxx_Ch1_Out03 Jxx_Ch1_Out04 Jxx_Ch1_Out05 Jxx_Ch1_Out06 Jxx_Ch1_Out07 0V COM0 (+V) L L Wd m+1 External connection and terminal-device variable diagram L L L L L L Jxx_Ch2_Out00 Jxx_Ch2_Out01 Jxx_Ch2_Out02 Jxx_Ch2_Out03 Jxx_Ch2_Out04 Jxx_Ch2_Out05 Jxx_Ch2_Out06 Jxx_Ch2_Out07 0V COM1 (+V) 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 L Jxx_Ch1_Out09 L Jxx_Ch1_Out10 L Jxx_Ch1_Out11 Jxx_Ch1_Out12
PAGE 27
CJ1W-OC/OA/OD Bit Allocations for Output Unit 8-point Output Unit 16-point Output Unit Allocated CIO word CIO Bit Wd m (Output) Signal name (CJ/NJ) Wd m+1 (Output) Signal name (CJ/NJ) OUT0/Jxx_Ch1_Out00 00 OUT0/Jxx_Ch1_Out00 01 OUT1/Jxx_Ch1_Out01 01 OUT1/Jxx_Ch1_Out01 : : 06 Wd m (Output) : : OUT6/Jxx_Ch1_Out06 14 OUT14/Jxx_Ch1_Out14 07 OUT7/Jxx_Ch1_Out07 15 OUT15/Jxx_Ch1_Out15 08 − 09 − : : 14 − 15 − 64-point Output Unit Allocated CIO word Wd m (Output) Bit 00 32-
PAGE 28
CJ1W-OC/OA/OD External Interface 8-point/16-point Units (18-point Terminal Blocks) Model number label I/O indicators Connector Connect to the connector on the next Unit. Terminal block for I/O wiring, 18P × 1 ERR 0 1 8 9 10 11 12 13 14 15 2 3 4 5 6 7 Note: The CJ1W-OD202, CJ1W-OD204, and CJ1W-OD212 also have an ERR indicator for the load short-circuit alarm.
PAGE 29
CJ1W-OC/OA/OD 64-point Units (Models with Two 40-point Fujitsu Connectors or MIL Connector) Indicator Switch Model number 1 2 Changes the 32 I/O displayed on the I/O indicators. ID261 ID261 I/O indicators Setting 1 Setting 2 Wd m and m+1: CN1 Wd m+2 and m+3: CN2 I/O wiring connector (40-pin × 2) Unit with MIL Connector Unit with Fujitsu-compatible Connector Connector Connected to the connector on the next Unit.
PAGE 30
CJ1W-OC/OA/OD I/O Unit Wiring Methods An I/O Unit can be connected to an external device by any of the following three methods. 1. User-provided Cable An I/O Unit can be directly connected to an external device by using a connector. A B A User-provided cable B External device C Connector C 2. Connector-Terminal Block Conversion Unit Use a Connecting Cable to connect to a Connector-Terminal Block Conversion Unit.
PAGE 31
CJ1W-OC/OA/OD 1. Using User-made Cables with Connector Available Connectors Use the following connectors when assembling a connector and cable.
PAGE 32
CJ1W-OC/OA/OD 2.
PAGE 33
CJ1W-OC/OA/OD Types of Connecting Cables Appearance Connectors Model XW2Z-050B XW2Z-@@@B One 40-pin Connector Made by Fujitsu Component, Ltd. to One 40-pin MIL Connector XW2Z-@@@K Cable lenght [m] 0.5 XW2Z-100B 1 XW2Z-150B 1.5 XW2Z-200B 2 XW2Z-300B 3 XW2Z-500B 5 XW2Z-C50K 0.5 XW2Z-100K 1 XW2Z-150K 1.5 XW2Z-200K 2 XW2Z-300K 3 XW2Z-500K 5 One 40-pin MIL Connector to One 40-pin MIL Connector 3.
PAGE 34
CJ1W-OC/OA/OD Unit CJ1W-OD233 CJ1W-OD234 CJ1W-OD261 CJ1W-OD262 CJ1W-OD263 I/O capacity 32 outputs Number of connectors 1 MIL connector 32 outputs NPN 1 MIL connector 64 outputs NPN 2 Fujitsu connectors 64 outputs 2 MIL connectors 64 outputs Polarity 2 MIL connectors NPN PNP NPN Connection pattern Number of branches Connecting Cable I/O Relay Terminal A 2 G79-O@-@-D1 G7TC-OC16 A 2 G79-O@-@-D1 G7TC-OC08 A 2 G79-O@-@-D1 G70D-SOC16 A 2 G79-O@-@-D1 G70D-FOM16 A 2 G7
PAGE 35
CJ1W-OC/OA/OD Dimensions (Unit: mm) 8-point/16-point Units (18-point Terminal Blocks) CJ1W-OC201/ OC211/ OA201/ OD201 / OD202/ OD203/ OD204/ OD211/ OD213 / OD212 2.7 89 65 ID211 0 1 2 8 9 10 11 12 13 14 15 3 4 5 6 7 0 1 2 3 4 5 6 90 7 8 9 10 11 12 13 14 15 COM COM 2.7 DC24V 7mA 31 32-point Unit (Output Units) With Fujitsu-Compatible Connector (40-pin × 1) CJ1W-OD231 (112.5) 2.7 66.5 65 ID231 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0 1 1 2.7 DC24V 4.
PAGE 36
CJ1W-OC/OA/OD 64-point Units (Output Units) With Fujitsu-Compatible Connector (40-pin × 2) CJ1W-OD261 66.5 65 31 2.7 90 2.7 (112.5) With MIL Connector (40-pin × 2) CJ1W-OD262 / OD263 65 2.7 90 2.7 83.6 31 Related Manuals Name Cat. No.
PAGE 37
Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron).