CP-series CP1E CPU Units CP1E-E@@SD@-@ CP1E-N@@S@D-@-@ CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@ The CP1E Programmable Controller: Economical, Easy to use, and Efficient ■The E@@(S)-type Basic CPU Units provide cost performance and easy application with only basic functionality. ■The N@@(S@) and NA-types Application CPU Units support Programmable Terminal connection, position control, and inverter connection CP1E-E20SDR-A CP1E-N40S1DR-A Features • New CP1E CPU Units now available.
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ System Configuration Basic System Configuration Using an E@@S-type CPU Unit Support Software CX-Programmer Expansion I/O Units Expansion Units 20 or 40 I/O Points Analog I/O 8 inputs Analog inputs 8 outputs Analog outputs 16 outputs Temperature sensors 32 outputs CompoBus/S I/O Link Unit DIN Track Personal computer IBM PC/AT or equivalent CP1E-E30SDR- CP1E-E40SDR- CP1E-E60SDR- CP1E-E14SDR- CP1E-E20SDR- Up to 3 Units can be connected When a t
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ Basic System Configuration Using an N/NA@@S(1)-type CPU Unit Battery CP1W-BAT01 Expansion I/O Units Support Software CX-Programmer DIN Track Expansion Units Personal computer IBM PC/AT or equivalent CP1E-N30S(1)D - CP1E-N40S(1)D - CP1E-N60S(1)D - Programmable Terminal (PT) 20 or 40 I/O Points Analog I/O 8 inputs Analog inputs 8 outputs (NT Link/Host Link) General component Inverter Analog outputs 16 outputs Temperature sensors 32 outputs CompoBu
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ Model Number Structure ■ Model Number Legend (Not all models that can be represented with the model number legend can necessarily be produced.) CP1E-@@@@@D@-@ (1) (2) (3) (4) (5) (6) 1. Class E : Basic model N : Application model NA :Application model with built-in analog 2.
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ N/NA@@(S)-type CPU Units Normal-type N@@-/NA-type Renewal-type N@@S1-type Analog input terminal (NA-type only) Renewal-type N@@S-type Peripheral USB Port Peripheral USB Port Option Board slot Peripheral USB Built-in RS-232C Port Analog output terminals port (NA-type only) Built-in RS-232C port Built-in RS-232C port Built-in RS-485 port Difference in Characteristics and Functions Function N/NA@@-type (Normal) N@@S(1)-type (Renewal) Analog adjusters 2 adj
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ Ordering Information International Standards • The standards are abbreviated as follows: U: UL, U1: UL (Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus, UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, and CE: EC Directives. • Contact your OMRON representative for further details and applicable conditions for these standards.
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ N@@S1-type CP1E CPU Units (Application Models/Built-in RS-232C, RS-485, USB ports) Specifications Product name N@@S1type CPU Units with 30 I/O Points Power Supply Inputs Outputs 100 to 240 VAC Output type Program capacity Data memory capacity Relay 18 12 Transistor (sinking) 8K steps 8K words External power supply (24 VDC) (A) Current consumption (A) Model 5V 24 V 0.30 0.21 0.07 CP1E-N30S1DR-A -- 0.27 0.02 CP1E-N30S1DT-D -- 0.27 0.
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ Battery Option Product name Specifications Model Standards Battery Set For N/NA@@(S@)-type CP1E CPU Units Note: Mount a Battery to an N/NA@@(S@)-type CPU Unit if the data in the following areas must be backed up for power interruptions. • DM Area (D) (except backed up words in the DM Area), Holding Area (H), Counter Completion Flags (C), Counter Present Values (C), Auxiliary Area (A), and Clock Function (Use batteries within two years of manufacture.
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ N/NA@@-type CP1E CPU Units (Application Models/Built-in RS-232C, USB ports) Specifications Product name N@@-type CPU Units with 14 I/O Points Power Supply Inputs Outputs 100 to 240 VAC 8 6 Output type N@@-type CPU Units with 20 I/O Points 100 to 240 VAC Data memory capacity N@@-type CPU Units with 30 I/O Points 100 to 240 VAC 0.07 CP1E-N14DR-A Transistor (sinking) -- 0.22 0.02 CP1E-N14DT-A -- 0.22 0.02 CP1E-N14DT1-A -- 0.17 0.
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ Specifications Product name NA-type CPU Units with 20 I/O Points (Built-in analog) Power Supply Inputs Outputs 100 to 240 VAC Data memory capacity Program capacity Relay 12 24 VDC Output type External power supply (24 VDC) (A) Current consumption (A) Model 5V 24 V 0.30 0.18 0.11 CP1E-NA20DR-A -- 0.23 0.09 CP1E-NA20DT-D -- 0.23 0.
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ Programming Devices Specifications Product name Number of licenses Media Model Standards FA Integrated Tool Package CX-One Lite Ver.4.@ CX-One Lite is a subset of the complete CX-One package that provides only the Support Software required for micro PLC applications. CX-One Lite runs on the following OS. Windows 2000 (Service Pack 4 or higher), XP, Vista, or 7 Note: Except for 64-bit version. CX-One Lite Ver. 4.@ includes Micro PLC Edition CXProgrammer Ver.9.
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ Expansion I/O Units and Expansion Units (for CP1E E30/40/60(S), N30/40/60(S@), or NA20 CPU Units) CP1E E10/14/20(S) or N14/20 CPU Units do not support Expansion I/O Units and Expansion Units. Unit type Current consumption (A) Specifications Product name Model Inputs Outputs Output type 5V 24 V 8 -- -- 0.018 -- CP1W-8ED Relay 0.026 0.044 CP1W-8ER Transistor (sinking) 0.075 -- CP1W-8ET Transistor (sourcing) 0.
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ General Specifications Type AC power supply models DC power supply models Model CP1E-@@@S@D@-A CP1E-@@@D@-A CP1E-@@@S@D@-D CP1E-@@@D@-D Enclosure Mounted in a panel Dimensions (H × D × W) E/N/NA@@-type CPU Unit with 10 I/O points (CP1E-E10D@-@): 90mm *1 × 85mm *2 × 66 mm CPU Unit with 14 or 20 I/O points (CP1E-@14D@-@/@20D@-@): 90mm *1 × 85mm *2 × 86 mm CPU Unit with 30 I/O points (CP1E-@30D@-@): 90mm *1 × 85mm *2 × 130 mm CPU Unit with 40 I/O points (CP1E
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ Performance Specifications CP1E-E@@SD@-@ CP1E-@@D@-@ CP1E-N@@S@D@-@ CP1E-N@@D@-@ CP1E-NA@@D@-@ Program capacity 2 K steps (8 Kbytes) including the symbol table, comments, and program indices of the CX-Programmer 8 K steps (32 Kbytes) including the symbol table, comments, and program indices of the CX-Programmer Control method Stored program method I/O control method Cyclic scan with immediate refreshing Program language Ladder diagram Item Instructions
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ B-type Peripheral USB Port Conforming to USB 2.0 B type connector Transmission 5 m max. distance Built-in RS-232C port Communications method synchronization Baud rate Transmission No built-in RS-232C port distance Built-in RS-485 port Communications method synchronization Baud rate No built-in RS-485 port Transmission distance Communications Serial Option port Mountable Option Boards Communications method Option Board cannot be mounted.
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ Item Data Memory Area (D) Operating modes 16 CP1E-E@@SD@-@ CP1E-E@@D@-@ CP1E-N@@S@D@-@ CP1E-N@@D@-@ CP1E-NA@@D@-@ 8 Kwords: D0 to D8191 Of these, 7,000 words can be saved to the backup memory (built-in EEP-ROM) using settings in the Auxiliary Area 2 Kwords: D0 to D2047 Of these, 1,500 words can be saved to the backup memory (built-in EEPROM) using settings in the Auxiliary Area. PROGRAM mode: Program execution is stopped.
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ Internal Memory in the CPU Units CPU Unit Memory Backup Structure The internal memory in the CPU Unit consists of built-in RAM and built-in EEPROM. The built-in RAM is used as execution memory and the builtin EEPROM is used as backup memory.
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ I/O Memory Areas Data can be read and written to I/O memory from the ladder programs. I/O memory consists of an area for I/O with external devices, user areas, and system areas. System Areas Input bits (starting from CIO 0) User Areas Auxiliary Area (A) Timer Area (T) Work Area (W) DM Area (D) Counter Area (C) Condition Flags Holding Area (H) Clock Pulses Output bits (starting from CIO 100) I/O Memory Areas Name CIO Area No.
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ Backing Up and Restoring DM Area Data The contents of the DM Area (D) will become unstable if the power supply is interrupted for longer than the backup time of the built-in capacitor (50 hours for an E@@(S)-type CPU Unit, 40 hours for an N/NA@@(S@)-type CPU Unit without a Battery). The contents of the specified words in the DM Area data can be backed up from RAM to the built-in EEPROM backup memory during operation by turning ON a bit in the Auxiliary Area.
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ Built-in Inputs Terminal Arrangements ●Input Terminal Arrangement for CPU Unit with 10 I/O Points AC power supply models CIO 0 L1 L2/N COM 01 NC 00 03 02 05 04 DC power supply models CIO 0 + − NC COM 01 00 03 02 05 04 ●Input Terminal Arrangement for CPU Unit with 14 I/O Points AC power supply models CIO 0 L1 L2/N COM 01 NC 00 03 02 05 04 07 06 NC NC NC NC DC power supply models CIO 0 + − NC COM 01 00 03 02 05 04 07 06 NC NC NC NC ●Inpu
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ ●Input Terminal Arrangement for CPU Unit with 40 I/O Points AC power supply models CIO 0 CIO 1 L1 L2/N COM 01 00 03 02 05 04 07 06 09 08 11 10 01 00 03 02 07 05 06 04 11 09 08 10 DC power supply models CIO 0 + − NC CIO 1 COM 01 03 00 05 02 04 07 06 09 08 11 10 01 00 03 02 07 05 04 06 11 09 08 10 ●Input Terminal Arrangement for CPU Unit with 60 I/O Points AC power supply models CIO 0 L1 CIO 1 L2/N COM 01 00 03 02 05 04 07 0
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ Allocating Built-in Inputs to Functions Input terminals are allocated functions by setting parameters in the PLC Setup. Set the PLC Setup so that each terminal is used for only one function.
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ Built-in Outputs Terminal Arrangements ●Output Terminal Arrangement for CPU Unit with 10 I/O Points ●Output Terminal Arrangement for CPU Unit with 14 I/O Points AC power supply model DC power supply model AC power supply model DC power supply model 00 01 02 03 00 01 02 03 04 05 NC COM COM NC COM NC COM NC COM COM NC COM NC CIO 100 CIO 100 ●Output Terminal Arrangement for CPU Unit with 20 I/O Points AC power supply model DC power supply model 00
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ ●Output Terminal Arrangement for CPU Unit with 40 I/O Points AC power supply model E/N40(S@)D@-A + 00 - 01 02 03 04 06 COM COM COM COM 05 00 01 03 04 06 07 COM 02 COM 05 CIO 100 07 CIO 101 DC power supply model N40D@-D NC 00 01 02 03 04 06 NC COM COM COM COM 05 00 01 03 04 06 07 COM 02 COM 05 CIO 100 07 CIO 101 N40S(1)DT-D V+ 00 V- 01 02 03 04 06 COM(V-) COM COM 05 00 01 03 04 06 07 COM 02 COM 05 100 CH 07 101 CH
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ ●Output Terminal Arrangement for CPU Unit with 20 I/O Points and Built-in Analog AC power supply model + − 00 01 02 DC power supply model 04 05 07 COM COM COM 03 COM 06 CIO 100 NC IOUT0 NC VOUT0 COM0 NC 00 01 02 04 05 NC COM COM COM 03 COM 06 CIO 190 CIO 100 07 NC IOUT0 NC VOUT0 COM0 CIO 190 Allocating Built-in Output Terminals to Functions Output terminals are allocated functions by setting parameters in the PLC Setup.
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ I/O Specifications for CPU Units Input Specifications Item Specification Input type High-speed counter inputs or Normal Inputs High-speed counter inputs, interrupt input, quick-response inputs, or Normal Inputs Normal inputs Input bits CIO 0.00 to CIO 0.01 CIO 0.02 to CIO 0.07 *1 CIO 0.08 to CIO 0.11, CIO 1.00 to CIO 1.11 and CIO 2.00 to CIO 2.11 *1 Input voltage 24 VDC, +10%, -15% Applicable sensors 2-wire and 3-wire sensors Input Impedance 3.
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ Output Specifications ●Output Specifications for Relay Outputs Item Specification 250 VAC/2 A (cosφ = 1) 2 A, 24 VDC (4 A/common) Maximum switching capacity Minimum switching capacity Electrical Service life of relay 5 VDC, 10 mA Resistive load 200,000 operations (24 VDC) Inductive load 70,000 operations (250 VAC, cosφ = 0.4) Mechanical 20,000,000 operations ON delay 15 ms max. OFF response time 15 ms max.
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ ●Output Specifications for Transistor Outputs (Sinking or Sourcing) Normal Outputs Specification N@@(S@)-type 100.00, 100.01 Item N@@S(1)-type Maximum switching capacity Minimum switching capacity Leakage current Residual voltage ON response time OFF response time Fuse External Power Supply N@@(S@)-type 100.02 to 102.07 *2 E10-type 100.00 to 100.03 N@@-type 0.3 A/output, 0.9 A/common *1 4.5 to 30 VDC CP1E-E10D@-@: 0.9 A/Unit CP1E-N40(S@)D@-@: 3.
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ PWM Output (CIO 100.01) Item Maximum switching capacity Maximum output frequency PWM output accuracy Specification 30 mA/4.5 to 26.4 VDC 32 kHz For ON duty +1%, .0%:10 kHz output For ON duty +5%, .0%: 0 to 32 kHz output OFF Output waveform ON tON ON duty= T tON × 100% T Note: The OFF and ON refer to the output transistor. The output transistor is ON at level “L”.
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ Specifications of Expansion I/O Units and Expansion Units Expandable CPU Units • Expansion I/O Units and Expansion Units cannot be connected to E10/14/20(S) or N14/20 CPU Units. • A total of up to three Expansion I/O Units and Expansion Units can be connected to an E30/40/60(S), N30/40/60(S@), NA20 CPU Unit. ●CP1E E10/14/20(S) or N14/20CPU Unit CP-series Expansion Units and Expansion I/O Units cannot be connected.
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ Specifications of Expansion I/O Units ●Input Specifications (CP1W-40EDR/40EDT/40EDT1/20EDR1/20EDT/20EDT1/8ED) Item Specification Input voltage 24 VDC +10%/-15% Input impedance 4.7 kΩ Input current 5 mA typical ON voltage 14.4 VDC min. OFF voltage 5.0 VDC max. ON delay 1 ms max. * OFF delay 1 ms max. * IN IN Circuit configuration 4.
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ Output load current(%) 2. Restrictions of CP1W-16ER/32ER Limit the output load current to satisfy the following derating curve. 100 50 0 55 43 Ambient temperature(˚C) Number of inputs ON simultaneously (%) 3. CP1W-32ER’s maximum number of simultaneously ON output points is 24 (75%). Relation between Number of ON Outputs and Ambient Temperature (CP1W-32ER) 75 0 55 Ambient temperature (˚C) 4.
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ ●Transistor Outputs (Sinking or Sourcing) Specification Item CP1W-40EDT CP1W-40EDT1 Max. switching capacity *1 CP1W-32ET CP1W-32ET1 CP1W-20EDT CP1W-20EDT1 CP1W-16ET CP1W-16ET1 CP1W-8ET CP1W-8ET1 4.5 to 30 VDC 0.3 A/output 4.5 to 30 VDC 0.3 A/output 24 VDC +10%/-5% 0.3 A/output 4.5 to 30 VDC 0.3 A/output 4.5 to 30 VDC 0.3 A/output 0.9 A/common 3.6 A/Unit 0.9 A/common 7.2 A/Unit 0.9 A/common 1.8 A/Unit 0.9 A/common 3.6 A/Unit 0.9 A/common 1.
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ Specifications of Expansion Units ●Analog Input Units Model CP1W-AD041 Item Voltage Input Current Input Number of inputs 4 inputs (4 words allocated) Input signal range 0 to 5 VDC, 1 to 5 VDC, 0 to 10 VDC, or –10 to 10 VDC 0 to 20 mA or 4 to 20 mA Max. rated input ±15 V ±30 mA External input impedance 1 MΩ min. Approx. 250 Ω Resolution 1/6000 (full scale) Overall accuracy 25°C 0.3% full scale 0.4% full scale 0 to 55°C 0.6% full scale 0.
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ ●Analog I/O Units Model CP1W-MAD11 Item Analog Input Section Voltage I/O 2 inputs (2 words allocated) Input signal range 0 to 5 VDC, 1 to 5 VDC, 0 to 10 VDC, or −10 to 10 VDC 0 to 20 mA or 4 to 20 mA Max. rated input ±15 V ±30 mA External input impedance 1 MΩ min. Approx. 250 Ω Resolution 1/6000 (full scale) Overall accuracy Analog Output Section Current I/O Number of inputs 25°C 0.3% full scale 0.4% full scale 0 to 55°C 0.6% full scale 0.
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ External Interfaces The CP1E CPU Units provide the following external interfaces.
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ Serial Communications Port for N/NA@@(S@)-type CPU Units The Serial Communication Port can be used for a CP1E N/NA@@(S@)-type CPU Unit. N30/40/60S1 CPU Units N30/40/60S CPU Units Built-in RS-232C, RS-485 ports. Built-in RS-232C port. Built-in RS-232C Built-in RS-232C Built-in RS-2485 N30/40/60 or NA20 CPU Units One built-in RS-232C port and one Option Board can be used.
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ Built-in RS-232C Port and CP1W-CIF01 RS-232C Option Board ●RS-232C Connector 5 Abbreviation for signal name 1 Pin 6 9 Front Back Communications Status Indicator COMM RS-232 Connector CPU Unit Connector N@@-type built-in RS-232C port / CP1W-CIF01 N@@S(1)-type Buit-in RS-232C port Signal name Signal direction 1 FG Frame ground 2 SD (TXD) Send data Output -- 3 RD (RXD) Receive data Input 4 RS (RTS) Request to send Output 5 CS (CTS) Clear t
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ CP1W-CIF41 Ethernet Option Board version 2.0 or higher Front Rear Label IP ADDRESS: Attach the label here to show IP address and subnet mask. SUBNET MASK: Ethernet Connector COMM ERR Used to connect the Ethernet twisted-pair cable. 10BASE-T 100BASE-TX LED Indicators CPU Unit connector Display the operating status of the Option Board.
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ Connecting Cable Use the following cable to connect the CP1E CPU Unit to the computer running the Support Software. USB port Port at Unit Peripheral USB port (Conforming to USB 2.0, B connector) Port at computer Network type (communications mode) USB port USB 2.0 (or 1.
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ Programming Instructions Sequence Input Instructions Instruction LOAD Comparison Instructions Mnemonic Instruction Mnemonic LD LD,AND,OR+= LOAD NOT LD NOT LD,AND,OR+<> AND AND AND NOT AND NOT OR OR LD,AND,OR+> OR NOT OR NOT LD,AND,OR+>= AND LOAD AND LD LD,AND,OR+=+L OR LOAD OR LD NOT NOT CONDITION ON UP CONDITION OFF DOWN Input Comparison Instructions (unsigned) OUTPUT KEEP KEEP DIFFERENTIATE UP DIFU DIFFERENTIATE DOWN DIFD SET
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ Data Shift Instructions Instruction Conversion Instructions Mnemonic Mnemonic SFT BCD-TO-BINARY BIN REVERSIBLE SHIFT REGISTER SFTR WSFT DOUBLE BCD-TO-DOUBLE BINARY BINL WORD SHIFT ARITHMETIC SHIFT LEFT ASL BINARY-TO-BCD BCD ARITHMETIC SHIFT RIGHT ASR ROTATE LEFT ROL ROTATE RIGHT DOUBLE BINARY-TO-DOUBLE BCD BCDL 2’S COMPLEMENT ROR ONE DIGIT SHIFT LEFT SLD ONE DIGIT SHIFT RIGHT SRD SHIFT N-BITS LEFT NASL DOUBLE SHIFT N-BITS LEFT NSLL SHIFT
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ Subroutine Instructions Instruction SUBROUTINE CALL Mnemonic SBS SUBROUTINE ENTRY SBN SUBROUTINE RETURN RET Interrupt Control Instructions Instruction SET INTERRUPT MASK Mnemonic MSKS CLEAR INTERRUPT CLI DISABLE INTERRUPTS DI ENABLE INTERRUPTS EI High-speed Counter and Pulse Output Instructions Instruction MODE CONTROL Mnemonic INI HIGH-SPEED COUNTER PV READ PRV COMPARISON TABLE LOAD CTBL SPEED OUTPUT SPED SET PULSES PULS PULSE OUTPUT PLS2
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ Dimensions (Unit: mm) CP1E CPU Unit ●CPU Units with 10 I/O Points 66 85 56 110 100 8 90 Two, 4.5 dia. ●CPU Units with 14 or 20 I/O Points CP1E-@14/20D@@-@ 85 86 76 8 110 100 90 Two, 4.5 dia. CP1E-@14/20SD@@-@ 78.6 86 76 8 110 100 90 Two, 4.5 dia. ●CPU Units with 30 I/O Points CPU Units with 20 I/O Points and Built-in Analog CP1E-@30D@@-@, CP1E-NA20D@-@ 85 130 120 8 110 100 90 Four, 4.5 dia.
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ CP1E-@30S(1)D@@-@ 78.6 130 120 8 110 100 90 Four, 4.5 dia. ●CPU Units with 40 I/O Points CP1E-@40D@@-@ 85 150 140 8 110 100 90 Four, 4.5 dia. CP1E-@40S(1)D@@-@ 78.6 150 140 8 110 100 90 Four, 4.5 dia. ●CPU Units with 60 I/O Points CP1E-N60D@-@ 195 85 185 110 100 8 90 Four, 4.5 dia.
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ CP1E-@60S(1)D@@-@ 78.6 195 185 8 110 100 90 Four, 4.5 dia. Expansion I/O Units and Expansion Units ●CP1W-8E@@/CP1W-SRT21 5 50 66 56±0.2 8 100±0.2 90 Two, 4.5 dia. 5 ●CP1W-20ED@/CP1W-16E@@/CP1W-AD041/CP1W-DA021/CP1W-DA041/CP1W-MAD11/CP1W-TS@@@ 50 86 5 76±0.2 8 100±0.2 90 Two, 4.5 dia. 5 ●CP1W-40ED@/CP1W-32E@@ 150 50 140 8 110 100 90 Four, 4.5 dia.
CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@ Related Manuals Manual name SYSMAC CP Series CP1E CPU Unit Hardware Manual Cat. No. W479 Model numbers CP1E-E@@SD@-@ CP1E-N@@S@D@-@ CP1E-E@@D@-@ CP1E-N@@D@-@ CP1E-NA@@D@-@ Application To learn the hardware specifications of the CP1E PLCs Contents Describes the following information for CP1E PLCs.
READ AND UNDERSTAND THIS CATALOG Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. WARRANTY OMRON’s exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON.
