Datasheet

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@
29
PWM Output (CIO 100.01)
Note: The OFF and ON refer to the output transistor. The output transistor is ON at level “L”.
Built-in Analog I/O (NA-type CPU Units)
●Analog Input Specifications
●Analog Output Specifications
* In 0 to 20 mA mode, accuracy cannot be ensured at 0.2 mA or less.
●Shared I/O Specifications
Item Specification
Maximum switching capacity 30 mA/4.5 to 26.4 VDC
Maximum output frequency 32 kHz
PWM output accuracy
For ON duty +1%, .0%:10 kHz output
For ON duty +5%, .0%: 0 to 32 kHz output
Output waveform
Item Voltage input Current input
Number of inputs 2 inputs (Allocated 2 words: CIO 90 to CIO 91.)
Input signal range 0 to 5 V, 1 to 5 V, 0 to 10 V, or -10 to 10 V 0 to 20 mA or 4 to 20 mA
Max. rated input ±15 V ±30 mA
External input impedance 1 MΩ min. Approx. 250Ω
Resolution 1/6000
Overall accuracy
At 25°C ±0.3% full scale ±0.4% full scale
0 to 55°C ±0.6% full scale ±0.8% full scale
A/D conversion data
-10 to +10 V F448 to 0BB8 hex FS
Other ranges 0000 to 1770 hex FS
Averaging function Supported (Set for individual inputs in the PLC Setup.)
Open-circuit detection function Supported (Value when disconnected: 8000 hex)
Item Voltage output Current output
Number of outputs 1 output (Allocated 1 word: CIO 190.)
Output signal range 0 to 5 V, 1 to 5 V, 0 to 10 V, or -10 to 10 V 0 to 20 mA or 4 to 20 mA
Allowable external output load resistance 1 kΩ min. 600Ω max.
External input impedance 0.5Ωmax. ---
Resolution 1/6000
Overall accuracy
At 25°C ±0.4% full scale *
0 to 55°C ±0.8% full scale *
D/A conversion data
-10 to +10 V F448 to 0BB8 hex FS
Other ranges 0000 to 1770 hex FS
Item Specification
Conversion time 2 ms/point (6 ms total for 2 analog inputs and 1 analog output.)
Isolation method
Photocoupler isolation between analog I/O terminals and internal circuits.
No isolation between analog I/O signals.
T
ON duty=
× 100 %
T
t
ON
t ON
OFF
ON