Datasheet

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@
3
Basic System Configuration Using an N/NA@@S(1)-type CPU Unit
Basic System Configuration Using an N/NA-type CPU Unit
Expansion I/O Units Expansion Units
8 inputs
8 outputs
16 outputs
32 outputs
Analog I/O
Analog inputs
Analog outputs
Temperature sensors
CompoBus/S I/O Link Unit
Up to 3 Units can be connected
DIN Track
CP1W-CN811
CP1E CPU Unit
Expansion Units and
Expansion I/O Units
I/O Connecting Cable
When a two level layout is created by expansion and distance is required
20 or 40 I/O Points
(NT Link/Host Link)
General component
(No-protocol mode)
(Modbus-RTU)
CP-series PLC or
CJ1M PLC
(Serial PLC Link)
Host computer
(Host Link)
Programmable
Terminal (PT)
Inverter
Personal computer
Support Software
CX-Programmer
IBM PC/AT or equivalent
Battery
CP1W-BAT01
CP1E-N30S(1)D-
CP1E-N40S(1)D-
CP1E-N60S(1)D-
CP1E PLCs are supported by
CP1W-CIF41 version 2.0 or higher.
CP1E-N30D-
CP1E-N40D-
CP1E-N60D-
CP1E-NA20D-
CP1E-N14D-
CP1E-N20D-
CP1E CPU Unit
Expansion I/O Units Expansion Units
20 or 40 I/O Points
8 inputs
8 outputs
16 outputs
32 outputs
Analog I/O
Analog inputs
Analog outputs
Temperature sensors
CompoBus/S I/O Link Unit
Up to 3 Units can be connected
DIN Track
CP1W-CN811
CP1E CPU Unit
Expansion Units and
Expansion I/O Units
I/O Connecting Cable
Personal computer
IBM PC/AT or
equivalent
Built in RS-232C
COMM
RS-232C Option Board
CP1W-CIF01
COMM
RS-422A/485 Option Board
CP1W-CIF11
CP1W-CIF12
Or Or
Battery
CP1W-BAT01
When a two level layout is created by expansion and distance is required
(NT Link/HOST Link)
General component
(No-protocol mode)
(Modbus-RTU)
CP-series PLC or
CJ1M PLC
(Serial PLC Link)
Host computer
(Host Link)
Programmable
Terminal (PT)
*The CP1W-DAM01 LCD Option Board can not be used.
Inverter
Support Software
CX-Programmer
Ethernet Option Board
CP1W-CIF41
IP ADDRESS:
SUBNET MASK:
COMMERR
10BASE-T
100BASE-TX