Datasheet

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@
40
Connecting Cable
Use the following cable to connect the CP1E CPU Unit to the computer running the Support Software.
USB port
RS-232C Port for N/NA@@(S@)-type CPU Units
Note: Connectable with CX-Programmer Ver.9.1 or higher only.
* Use the USB-Serial Conversion Cable CS1W-CIF31 together to connect a PLC to a personal computer's USB port.
Port at Unit Port at computer
Network type
(communications mode)
Model numbers Length
Peripheral USB port
(Conforming to USB 2.0, B connector)
USB port USB 2.0 (or 1.1)
Commercially available USB cable
(A connector - B connector)
Less than 5 m
Port at Unit Port at computer Communications mode
Connecting Cable
Model Length Remarks
RS-232C Port or
CP1W-CIF01
(Add this to the option board slot.)
RS-232C port *
Host Link
(SYSWAY)
XW2Z-200S-CV 2m
With anti-static
connectors
XW2Z-500S-CV 5m
With anti-static
connectors
XW2Z-200S-V 2m ---
XW2Z-500S-V 5m ---