Datasheet

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@
5
N/NA@@(S)-type CPU Units
Difference in Characteristics and Functions
Product Lineup
Normal-type
N@@-/NA-type
Renewal-type
N@@S1-type
Renewal-type
N@@S-type
Function N/NA@@-type (Normal) N@@S(1)-type (Renewal)
Analog adjusters
2 adjusters
(Setting range: 0 to 255)
None
The analog adjuster PV in A642/A643 is fixed on 0000.
Built-in RS-232C port 6 signals are supported: SD, RD, RS, CS, DR and ER.
4 signals are supported: SD, RD, RS and CS.
DR (pin 7) and ER (pin 8) are not supported.
Option board
1 port (N30/40/60, NA20 CPU Unit only)
The following option boards can be mounted.
RS-232C Option Board
CP1W-CIF01
RS-422A/485 Option Board
CP1W-CIF11/12
Ethernet Option Board
CP1W-CIF41
Cannot be mounted
There is no slot for an option board.
Built-in RS-485 port None
1 port (N30/40/60S1 CPU Unit only)
With 2-wire connections, it can only communicate in half duplex.
Terminating resistance ON/OFF can be set by DIP switch.
Terminal
Arrangements
(Transistor
outputs
only)
COM
allocation
CIO 100.00 and CIO 100.01 correspond with different common
terminals.
CIO 100.00 and CIO 100.01 correspond with the same common
terminal.
Power
supply for
transistor
outputs
Not needed
Do not connect an external power supply.
Needed
It is necessary to connect a DC24V external power supply when
using terminals 00 and 01 on terminal block CIO 100. Do not
connect the external power supply to the terminals except 00 and 01
on terminal block CIO 100.
Normal-type Renewal-type
N@@ CPU Unit
RS-232C+1 option slot (*)
N@@S CPU Unit
Built-in RS-232C
N@@S1 CPU Unit
Built-in RS-232C+RS-485
Relay outputs
Transistor outputs
(sinking/sourcing)
Relay outputs
Transistor outputs
(sinking/sourcing)
Relay outputs
Transistor outputs
(sinking/sourcing)
Power
supply
AC DC AC DC AC DC AC DC AC DC AC DC
10 I/O points -- -- -- -- -- -- -- -- -- -- --
14 I/O points ❍❍❍ -- -- -- -- -- -- -- --
20 I/O points ❍❍❍ -- -- -- -- -- -- -- --
30 I/O points ❍❍❍❍-- -- ❍❍ -- -- ❍
40 I/O points ❍❍❍❍-- -- ❍❍ -- -- ❍
60 I/O points ❍❍❍❍-- -- ❍❍ -- -- ❍
Peripheral USB
Port
Built-inRS-232C
port
OptionBoardslot
Analog input terminal
(NA-type only)
Analogoutputterminals
(NA-typeonly)
Built-inRS-232C
port
Built-inRS-485
port
PeripheralUSBPort
PeripheralUSBPort
Built-inRS-232C
port
NC000102
NC COM COM COM 03
CIO 100.00 and CIO 100.01
are different COM.
V+000102
V- COM(V-) COM 03
CIO 100.00 and CIO 100.01
are the same COM.