Datasheet

CPU Units and Expansion Units 7
Pulse outputs
Output bits CIO 100.00 to CIO 100.03
Note 1. The above values assume a resistive load and do not consider the
impedance of the cable connecting the load.
2. The pulse widths during actual use may be smaller than the ones shown
above due to pulse distortion caused by connecting cable impedance.
Pulse outputs
Output bits CIO 100.01, CIO 100.03
Note 1. The above values assume a resistive load and do not consider the im-
pedance of the cable connecting the load.
2. The pulse widths during actual use may be smaller than the ones shown
above due to pulse distortion caused by connecting cable impedance.
Serial Communications Specifications
Note: Serial PLC Link can be used with either serial port 1 or serial port 2.
Item Specifications
Max. switching capacity 30 mA at 4.75 to 26.4 VDC
Min. switching capacity 7 mA at 4.75 to 26.4 VDC
Max. output frequency 100 kHz
Output waveform
OFF
ON
90%
10%
2 μs min.4 μs min.
Item Specifications
Max. switching capacity 30 mA at 4.75 to 26.4 VDC
Max. output frequency CP1L: 32.8 kHz
PWM output precision ON duty +5%, -0% at output frequency of 1 kHz
Output waveform
ON duty = x 100%
T
ton
OFF
ON
T
ton
Item Function Interface
Peripheral USB port For connecting Peripheral Device. Conforms to USB 1.1, B-type connector
Serial port 1 Host Link, No-protocol, NT Link (1: N), Serial PLC Link (See note.),
Serial Gateway (CompoWay/F master, Modbus-RTU master),
Modbus-RTU easy master function
The following can be used for either port.
CP1W-CIF01 RS-232C Option Board
CP1W-CIF11 RS-422A/485
Option Board
Can be used with either port.
Serial port 2
(CP1L-M30/M40 only)
COMM
COMM