Datasheet

G9SX-NS
19
D40A, D40Z and G9SX-NS @ Wiring
Wiring of Inputs and Outputs
Note: 1. When connecting a XS2F series connector with cable to a D40A connector type, the cable color of the auxiliary output is gray.
2. For details, refer to the data sheet of each Non-contact Door Switch.
*3. Only D40Z turns into OFF state when a fault is detected by the actuator.
Example: Wiring a Single Switch
D40A D40Z
*1. The auxiliary output load current must be 10 mA max.
*2. When connecting a XS2F series connector with cable to a
connector type, the color of the auxiliary output cable is gray.
Example: Wiring Multiple Switches
Connect Up to 30 Non-contact Door Switches
Example of auxiliary outputs of the D40Z
The auxiliary output of the D40Z supports the input polarities of both
PNP and NPN.
Signal name
Cable color of
D40A/D40Z
Pin No. of D40A
connector type
Description of operation
Non-contact Door Switch
power supply input
+Brown 1
Supplies power to the D40A or D40Z.
Connect to the D3 and D4 terminal of the G9SX-NS@.
-Blue 3
Non-contact Door Switch input White 2
Inputs signals from the G9SX-NS@.
The Non-contact Door Switch input must be ON as a required condition for
the Non-contact Door Switch output to be ON.
Non-contact Door Switch
output
Black 4
Turns ON and OFF according to actuator detection and the status of the
Non-contact Door Switch input.
Auxiliary output
Yellow ---
Turns ON when actuator is detected.
When a fault is detected, turns into OFF state regardless of actuator status. *3
Gray 5
White
G9SX-NS202-@
G9SX-NSA222-T03-@
Auxiliary output load *
1
D40A-1C@
D1 D2 D3 D4 A2
Black
Brown
Blue
Yellow
*
2
D1 D2 D3 D4
Black
Brown
White
Blue
G9SX-NS202
G9SX-NSA222
D40Z-1C
@
G9SX-NS202-@
G9SX-NSA222-T03-@
White
D1 D2 D3 D4
White White Black Black Black Brown Brown Brown Blue Blue Blue
PLC etc.
COM
IN
24 VDC
Gray
Yellow
PLC etc.
COM
IN
24 VDC
Gray
Yellow
Note: The auxiliary output load current must be 10 mA max.
Wrong connection may lead to a failure of the auxiliary
output circuit.
PNP
NPN
4
12
3
5
Pin arrangement of D40A connector type