Datasheet

3D4C
Model number legend
1 Connection method
Nothing: cable types
C: M12 connector types
2 Operation LED indicator, rated current and voltage
1: no indicator, 2 A 250 VAC/2 A 30 VDC (D4C- cable type only)
3: LED indicator, 2 A 30 VDC (D4C-cable type)
No indicator, 1 A 30 VDC (D4CC- M12 connector type)
4: LED indicator, 1 A 30 VDC (D4CC- M12 connector type only)
6: LED indicator 0.1 A 30 VDC (D4C- cable type only)
VAC only rated types with LED indicator are available. Contact your OMRON representative.
3Cable specification and length
Nothing: M12 connector models
2: 3 m oil resistant VCTF cable (other cable lengths are available)
4Actuator
01: Plu
nger
02: Roller plunger
03: Crossroller plunger
20: Roller lever (for D4C)
24: Roller lever (for D4CC)
31: Sealed plunger
32: Sealed roller plunger
33: Sealed crossroller plunger
41: Plunger with M14 mounting
42: Roller plunger with M14 mounting
43: Crossroller plunger with M14 mounting
50: Coil spring
Additional actuators (contact your OMRON representative for details and availa bility)
10: Bevel plunger
24: High sensitivity roller lever
27: Variable roller lever
29: Variable rod lever
60: Center roller lever
5 Specials (contact your OMRON representative for details and availability)
-C: Cold resistant models down to -40°C
-M: Models with oil drain hole (plunger types)
-P: Enhanced outdoor lifetime models (silicone rubber seal, higher grade stainless steel)
-B: Models with LED indicator where indicator turns ON when actuator is operated (standard is indicator tu
rns OFF when ac-
tuator is operated)
-M1J/ -1EJ: Pre-wired models with M12 plug, 2 wires (NO) or 3 wires (NO+NC) connected and 0.3 m, 0.5 m or 1 m VCTF cable
(cUL) Models with UL approval (UL508: file nr E76675) and CSA approval (CSA C22.2 No. 14: file nr LR45746)
1 2 3 4 5
D4C@-@@@-@