Datasheet

ManualsBrandsOmron Industrial Automation ManualsOptical SensorsFibre Optic Amplifier PNP

1E3X-SD

Easy-teach digital fiber amplifier

E3X-SD

The E3X-SD easy-teach fiber amplifier is the ideal solution for

all standard fiber applications. The one-button teaching and/

or the simple threshold adjustment with up/down keys and the

easy to read display allow an intuitive usage and fast set up.

• easy one-button teaching

• easy to read display and simple threshold adjustment with

up/ down keys for intuitive usage

• GIGA RAY LED for high performance and precision

Ordering Information

Amplifier Unit Connectors (sold separately)

Note: Stickers for Connectors are included as accessories.

Accessories (sold separately)

Shape Item

Order code

NPN output PNP output

Pre-wired E3X-SD21 2M E3X-SD51 2M

Fiber amplifier connector

E3X-SD7 E3X-SD9

*1.

Order connector separately. For M8 connector models see E3X-DA-S.

Shape Type Comment Order code

Fiber amplifier

connector

2 m PVC cable E3X-CN21

30 cm PVC cable with M12 plug connector (4 pin) E3X-CN21-M1J 0.3M

30 cm PVC cable with M8 plug connector (4 pin) E3X-CN21-M3J-2 0.3M

*1.

4-wire version. For 3-wire version order E3X-CN11.

Mounting Brackets

Appearance Model Quantity

E39-L143 1

End Plate

Appearance Model Quantity

PFP-M 1

Summary of content (12 pages)

PAGE 1
Easy-teach digital fiber amplifier E3X-SD The E3X-SD easy-teach fiber amplifier is the ideal solution for all standard fiber applications. The one-button teaching and/ or the simple threshold adjustment with up/down keys and the easy to read display allow an intuitive usage and fast set up. • easy one-button teaching • easy to read display and simple threshold adjustment with up/ down keys for intuitive usage • GIGA RAY LED for high performance and precision Ordering Information Shape *1.
PAGE 2
Ratings and Specifications Amplifier Units Item E3X-SD@ Light source (wavelength) Red, 4-element LED (625 nm) Power supply voltage 12 to 24 VDC 10%, ripple (p-p): 10% max. Power consumption/ Current consumption 960 mW max. (Power supply voltage: 24 V, Current consumption: 40 mA max.) (Power supply voltage: 12 V, Current consumption: 80 mA max.) Control output Open-collector output (NPN or PNP) Load power supply: 26.4 V max., Load current: 50 mA max. (Residual voltage: 1.5 V max.
PAGE 3
Output Circuit Diagrams Output form NPN Output PNP Output Model Output transistor operation mode Timing charts Light-ON Incident light No incident light Operation indicator ON (orange) OFF ON Output transistor OFF Operate Load (e.g.
PAGE 4
Safety Precautions ! Warning This product is not designed or rated for ensuring safety of persons either directly or indirectly. Do not use it for such purposes. ! Caution Do not exceed the rated voltage. Excess voltage may result in malfunction or fire. Do not use an AC power supply. Using an AC power supply may result in rupturing.. High-temperature environments may result in burn injury. Precautions for Safe Use The following precautions must be observed to ensure safety. 1.
PAGE 5
Fiber Connection and Disconnection The E3X Amplifier Unit has a lock lever. Connect or disconnect the fibers to or from the E3X Amplifier Unit using the following procedures: 1. Connection Open the Protective Cover, insert the fibers according to the fiber insertion marks on the side of the Amplifier Unit, and lower the lock lever. Sticker Sticker Note: Attach the stickers to the sides with grooves. Removing Connectors Insertion position Lock lever Fiber Fiber insertion mark 1.
PAGE 6
(Unit: mm) Dimensions Tolerance class IT16 applies to dimensions in this sheet unless otherwise specified. Amplifier Units Amplifier Units with Cables E3X-SD21 E3X-SD51 15 10 Vinyl-insulated round cable 4 dia. cable / 3 conductors / Standard length: 2 m (Conductor cross section: 0.2 mm2, Insulator diameter: 1.1 mm) Operation indicator DIN track mounting 3 128.95 180° 93.75 Hole for optical communications 31.5 8 (9) 10.7 10.75 Two, 2.4 dia. 3.4 2.4 13 Multiple connection diagram 4 30.
PAGE 7
Amplifier Units with Connectors E3X-SD7 E3X-SD9 15 10 Operation indicator DIN track mounting 3 128.95 180° 93.75 31.5 8 Hole for optical communications A dia. ✽ (9) 12.95 10.7 Two, 2.4 dia. 3.4 Multiple connection diagram 13 30.4 End Plate (sold separately) PFP-M 12.4 L 64.
PAGE 8
Amplifier Unit Connectors (Wire-saving Connectors) Master Connector E3X-CN11 2,000 +500 Edge of amplifier (7) ✽ ✽ E3X-CN11: 4 dia. cable / 3 conductors / Standard length: 2 m (Conductor cross section: 0.2 mm2 (AWG24), Insulator diameter: 1.1 mm) Slave Connector E3X-CN12 2,000 +500 Edge of amplifier (7) ✽ ✽ E3X-CN12: 2.6 dia. cable / 1 conductor / Standard length: 2 m (Conductor cross section: 0.2 mm2 (AWG24), Insulator diameter: 1.1 mm) Accessories (sold separately) Mounting Brackets E39-L143 34.
PAGE 9
Nomenclature Amplifier Units E3X-SD Digital incident light level display or digital threshold value display (red) Digital threshold value adjustment Display of contents of functions (UP/DOWN) during operation Operation Selector Teaching status Use to switch between indication(orange) Light-ON and Dark-ON Operation Indicator Light-ON and Dark-ON Indicator (Orange) Lock Lever Teaching Button The sensitivity and threshold value can be set automatically.
PAGE 10
READ AND UNDERSTAND THIS DOCUMENT Please read and understand this document before using the products. Please consult your OMRON representative if you have any questions or comments. • Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. • Systems, machines, and equipment that could present a risk to life or property.
PAGE 11
E3X-SD 11
PAGE 12
Cat. No. E67E-EN-01 In the interest of product improvement, specifications are subject to change without notice. OMRON EUROPE B.V. Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands Phone: +31 23 568 13 00 Fax: +31 23 568 13 88 www.industrial.omron.