Datasheet

ManualsBrandsOmron Industrial Automation ManualsOptical SensorsPhotomicro Sensor 5mm NPN

CSM_EE-SX47/67_DS_E_11_3

Slot-type Photomicrosensor (Non-modulated) *1

EE-SX47/67

Global Standard Slot-type

photomicrosensors with 50- to

100-mA direct switching capacity.

• Series includes models that enable switching between

dark-ON and light-ON operation.

• Response frequency as high as 1 kHz.

• Easy operation monitoring with bright light indicator.

• Wide operating voltage range: 5 to 24 VDC

• Models in which the light indicator turns ON for dark-ON

operation are also available.

• A wide range of variations in eight different shapes.

• Flexible robot cable is provided as a standard feature.

*1. Pre-wired Models are available only in the EE-SX67 Series.

*2. Only for Pre-wired Models.

Ordering Information

Connector

*3. Dark-ON when the L terminal of the connector is opened, and light-ON when the L terminal and positive (+) terminal are connected. Do not connect the L terminal

to 0 V when using dark-ON operation. When using light-ON, it is useful to select the connector EE-1001-1. The L terminal and positive (+) terminal of this connector

are connected in advance.

*4. If you do not use the L terminal wire ((2) pink) when you use a Connector with Cable for an EE-1006 or EE-1010-series Photomicrosensor, noise may affect the

Photomicrosensor. To prevent the effects of noise, cut the unused L terminal wire at the base of the connector and wrap it with insulating tape to prevent it from

coming in contact with other terminals.

Appearance

Sensing

method

Connect-

ing method

Sensing distance

Output

configuration

Indicator mode

Model

NPN output PNP output

Through-

beam

type

(with slot)

Connector

(4 poles)

Dark-ON/Light-ON

(selectable) *3 *4

Incident light EE-SX670 EE-SX670P

No incident light EE-SX670A EE-SX670R

Light-ON Incident light EE-SX470 ---

Dark-ON/Light-ON

(selectable) *3 *4

Incident light EE-SX671 EE-SX671P

No incident light EE-SX671A EE-SX671R

Light-ON Incident light EE-SX471 ---

Dark-ON/Light-ON

(selectable) *3 *4

Incident light EE-SX672 EE-SX672P

No incident light EE-SX672A EE-SX672R

Light-ON Incident light EE-SX472 ---

Dark-ON/Light-ON

(selectable) *3 *4

Incident light EE-SX673 EE-SX673P

No incident light EE-SX673A EE-SX673R

Light-ON Incident light EE-SX473 ---

Dark-ON/Light-ON

(selectable) *3 *4

Incident light EE-SX674 EE-SX674P

No incident light EE-SX674A EE-SX674R

Light-ON Incident light EE-SX474 ---

Dark-ON/Light-ON

(selectable) *3 *4

Incident light EE-SX675 EE-SX675P

Dark-ON/Light-ON

(selectable) *3 *4

Incident light EE-SX676 EE-SX676P

Dark-ON/Light-ON

(selectable) *3 *4

Incident light EE-SX677 EE-SX677P

For the most recent information on models that have been certified for

safety standards, refer to your OMRON website.

Be sure to read Safety Precautions on

page 5.

Infrared li

Standard

5 mm

(slot width)

L-shaped

T-shaped,

slot center

7 mm

Close-

mounting

Close-

mounting

T-shaped,

slot center

10 mm

F-shaped

R-shaped

Summary of content (10 pages)

PAGE 1
Slot-type Photomicrosensor (Non-modulated) *1 EE-SX47/67 CSM_EE-SX47/67_DS_E_11_3 Global Standard Slot-type photomicrosensors with 50- to 100-mA direct switching capacity. • Series includes models that enable switching between dark-ON and light-ON operation. • Response frequency as high as 1 kHz. • Easy operation monitoring with bright light indicator. • Wide operating voltage range: 5 to 24 VDC • Models in which the light indicator turns ON for dark-ON operation are also available.
PAGE 2
EE-SX47/67 Pre-wired Models Appearance Infrared light Sensing method Sensing distance Output configuration Indicator mode Connecting method Model NPN output PNP output Standard EE-SX670-WR 1M EE-SX670P-WR 1M EE-SX671-WR 1M EE-SX671P-WR 1M EE-SX672-WR 1M EE-SX672P-WR 1M EE-SX673-WR 1M EE-SX673P-WR 1M EE-SX674-WR 1M EE-SX674P-WR 1M EE-SX675-WR 1M EE-SX675P-WR 1M EE-SX676-WR 1M EE-SX676P-WR 1M EE-SX677-WR 1M EE-SX677P-WR 1M L-shaped T-shaped, slot center 7 mm Closemounting Throughbeam
PAGE 3
EE-SX47/67 Ratings and Specifications Type Standard L-shaped T-shaped, slot center 7 mm EE-SX672 EE-SX672A EE-SX472 EE-SX672WR EE-SX672P EE-SX672R EE-SX672PWR T-shaped, slot center 10 mm Close-mounting F-shaped R-shaped EE-SX670 EE-SX671 EE-SX673 EE-SX674 Connector EE-SX670A EE-SX671A EE-SX673A EE-SX674A EE-SX675 EE-SX676 EE-SX677 models EE-SX470 EE-SX471 EE-SX473 EE-SX474 Pre-wired EE-SX670EE-SX671EE-SX673EE-SX674EE-SX675EE-SX676EE-SX677models WR WR WR WR WR WR WR Connector EE-SX670P EE-SX671P EE-S
PAGE 4
EE-SX47/67 Engineering Data (Reference Value) Sensing Position Characteristics Sensing Position Characteristics Repeated Sensing Position Characteristics d Dark-ON Dark-ON Dark-ON Δd2 Δd3 Δd1 Δd4 d Δd5 d Light-ON Ta = −25°C Ta = 55°C Ta = 25°C Light-ON 0 1.0 2.0 3.0 4.0 5.0 6.0 Light-ON 0 1.0 Distance d (mm) 2.0 3.0 4.0 5.0 6.0 Distance d (mm) 0 3.20 3.22 3.24 3.26 3.28 Distance d (mm) Vcc =12 V, No. of repetitions: 20, Δd1 = 0.002 mm, Δd2 = 0.004 mm, Δd3 = 0.
PAGE 5
EE-SX47/67 PNP Output Output configuration Model Timing charts Terminal connections Output circuit Incident Interrupted Light-ON Light indicator (red) Output transistor Load (relay) EE-SX67@P EE-SX67@P-WR ON OFF ON OFF Operates Short-circuited between L terminal and positive terminal Releases Incident Interrupted Dark-ON Light indicator (red) Output transistor Load (relay) ON OFF ON OFF Operates Open between L terminal and positive terminal *1 *2 L Releases EE-SX670R EE-SX671R EE-SX672R
PAGE 6
EE-SX47/67 (Unit: mm) Dimensions Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified. Sensors EE-SX670/670P EE-SX670A/670R EE-SX470 EE-SX671/671P EE-SX671A/671R EE-SX471 Terminal Arrangement (1) Vcc (2) L (3) OUT Terminal Arrangement (1) L* OUTPUT (4) Vcc (2) L L* (3) OUT OUTPUT (4) GND (0 V) GND (0 V) * Pin 2 is not used for the EE-SX471. * Pin 2 is not used for the EE-SX470. 26.2 25.4 19 19 Two, 3.2 dia. holes Four, R2 3.2 6.95 14.
PAGE 7
EE-SX47/67 EE-SX674/674P EE-SX674A/674R EE-SX474 EE-SX675/675P Terminal Arrangement Terminal Arrangement (1) Vcc (1) Vcc (2) L L* (2) L L (3) OUT OUTPUT (3) OUT OUTPUT GND (0 V) (4) (4) GND (0 V) * Pin 2 is not used for the EE-SX474. 16.7 4 Optical axis Two, R1 Two, 3.5 dia. holes 7 6.35 26 Indicator window 7 10 21.5 6.95 3 0.8 3 Sensing window 3.8 6.2 13.4 5 Optical axis 9 1 2 3 13 2.54 13 5 0.8 0.1 3.7 (R) Optical axis 2.1 22.2 3.2 15.5 0.3 2.5 3.8 6.
PAGE 8
EE-SX47/67 EE-SX671-WR/671P-WR EE-SX670-WR/670P-WR Terminal Arrangement Brown Terminal Arrangement Vcc Brown Vcc Pink L Pink L Blue GND (0 V) Blue GND (0 V) Black OUTPUT Black OUTPUT 26.2 R3.5 R1 Optical axis 19 Optical axis 6.95 3.2 6.95 3 R1 19 18.7 3 3.2 dia. Indicator window 25.4 2 13.4 6.35 Optical axis 5 0.8 Robot cable of 2.8 dia., 4 cores, (0.15 mm2 with 0.8 mm dia. insulator); Standard length: 1 m 13.4 2 9 11.2 8.4 26.2 6.35 13.4 5 Sensing window 13.
PAGE 9
EE-SX47/67 EE-SX675-WR/675P-WR EE-SX674-WR/674P-WR Terminal Arrangement Brown 3.5 dia. Terminal Arrangement Vcc Brown L Pink L Blue GND(0V) Blue GND(0V) Black OUTPUT Black OUTPUT R1 7 Vcc Pink 10 Optical axis 6.35 26 7 7 4 6.95 25.7 Optical axis 3 3 13.4 5 19.5 0.8 Sensing window 2 Optical axis 2 Indicator window 9 (R) Robot cable of 2.8 dia., 4 cores, (0.15 mm2 with 0.8 mm dia. insulator); Standard length: 1 m Indicator window 13 3 26.2 8.4 6 3.2 13.
PAGE 10
Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron).