Datasheet

ManualsBrandsOmron Industrial Automation ManualsPower RelaysPower Relay 240V 10A 2.5kVA

General-purpose Relay

G2R-@-S (S)

Slim and Space-saving Power Plug-in Relay

■ Reduces wiring work by 60% when combined with the

P2RF-@-PU Push-In Plus Socket

(according to actual OMRON measurements).

■ Lockable test button models available.

■ Built-in mechanical operation indicator.

■ Provided with nameplate.

■ AC type is equipped with a coil-disconnection self-diagnostic

function (LED type).

■ High switching power (1-pole: 10 A).

Model Number Structure

Model Number Legend

1. Number of Poles

1:1 pole

2:2 poles

2. Terminals

S:Plug-in

3. Classification

Blank:General-purpose

N:LED indicator

D:Diode

ND:LED indicator and diode

NI:LED indicator with test button

NDI:LED indicator and diode with test button

4. Rated Coil Voltage

5. Mechanical operation indicator and Nameplate

(S):Models with mechanical operation indicator and Nameplate

Note: Contact your OMRON representative for Relays with gold-plated contacts.

Ordering Information

List of Models

Note: 1. The standard models are compliant with UL/CSA and VDE standards. Also, an EC compliance declaration has been made for combina-

tions with the P2RF-@-E, P2RF-@-S and P2RF-@-PU. The Relays bear the CE Marking.

2. Refer to Connecting Sockets, below, for applicable Socket models.

For the most recent information on models that have been certified for

safety standards, refer to your OMRON website.

G2R - -

123 4 5

S (S)

Whenyourorder,specifytheratedvoltage.

Classification

Coil ratings

Contact form

SPDT DPDT

General-purpose

AC 24, 110, 120, 230, 240

DC 6, 12, 24, 48

G2R-1-S (S) G2R-2-S (S)

LED indicator G2R-1-SN (S) G2R-2-SN (S)

LED indicator with test button G2R-1-SNI (S) G2R-2-SNI (S)

Diode

DC 6, 12, 24, 48

G2R-1-SD (S) G2R-2-SD (S)

LED indicator and diode G2R-1-SND (S) G2R-2-SND (S)

LED indicator and diode with test button G2R-1-SNDI (S) G2R-2-SNDI (S)

When ordering, add the rated coil voltage and "(S)" to the model number. Rated coil voltages are given in the coil ratings table.

Example: G2R-1-S 12 VDC

(S)

Rated coil voltage

Summary of content (12 pages)

PAGE 1
General-purpose Relay G2R-@-S (S) Slim and Space-saving Power Plug-in Relay ■ Reduces wiring work by 60% when combined with the P2RF-@-PU Push-In Plus Socket (according to actual OMRON measurements). ■ Lockable test button models available. ■ Built-in mechanical operation indicator. ■ Provided with nameplate. ■ AC type is equipped with a coil-disconnection self-diagnostic function (LED type). ■ High switching power (1-pole: 10 A).
PAGE 2
G2R-@-S (S) Accessories (Order Separately) Connecting Sockets Track/surface-mounting Socket Applicable Relay model Push-In Plus Terminal Blocks No. of poles Back-mounting Socket Screw terminals * Model PCB terminals Solder terminals Models Model Models 1 pole G2R-1-S (S) P2RF-05-PU P2RF-05 P2RF-05-E 2 poles G2R-2-S (S) P2RF-08-PU P2RF-08 P2RF-08-E P2R-05P P2R-057P P2R-05A P2R-08P P2R-087P P2R-08A * The structure of P2RF-@-E models provides finger protection.
PAGE 3
G2R-@-S (S) Specifications Coil Ratings Rated current* Rated voltage 50 Hz AC 60 Hz Armature OFF 43.5 mA 37.4 mA 253 Ω 0.81 1.55 110 V 9.5 mA 8.2 mA 5,566 Ω 13.33 26.83 120 V 8.6 mA 7.5 mA 7,286 Ω 16.13 32.46 230 V 4.4 mA 3.8 mA 27,172 Ω 72.68 143.90 240 V 4.2 mA 3.7 mA 27,800 Ω 90.58 182.34 Rated current* Coil resistance Coil inductance (H) (ref. value) Armature OFF Must operate voltage Armature ON 24 V Rated voltage DC Coil resistance Coil inductance (H) (ref.
PAGE 4
G2R-@-S (S) Characteristics Item 1 pole 2 poles Contact configration SPDT Contact structure Single Contact resistance 100 mΩ max. Operate (set) time 15 ms max. Release (reset) time AC: 10 ms max.; DC: 5 ms max. (w/built-in diode: 20 ms max.) Max. operating frequency Mechanical: Electrical: Insulation resistance 1,000 MΩ min.
PAGE 5
G2R-@-S (S) Engineering Data Maximum Switching Power G2R-2-S (S) G2R-1-S (S) 100 Switching current (A) AC inductive load (cosφ = 0.4) AC resistive load 10 DC resistive load DC inductive load (L/R = 7 ms) 1 0.1 1 10 100 Switching current (A) 100 AC resistive load DC resistive load 1 0.1 1000 AC inductive load (cosφ = 0.
PAGE 6
G2R-@-S (S) Dimensions (Unit: mm) Note: All units are in millimeters unless otherwise indicated. SPDT Relays G2R-1-S (S), G2R-1-SN (S), G2R-1-SNI (S) G2R-1-SD (S), G2R-1-SND (S), G2R-1-SNDI (S) Terminal Arrangement/Internal Connections (Bottom View) G2R-1-SD (S) (DC) G2R-1-S (S) 29 max. 1 13 max. 1 2 20 35.5 max. 5 4 3 G2R-1-SN (S), G2R-1-SNI (S) (AC) 4.75 2 5 3 4 4 2 5 3 7.5 0.
PAGE 7
G2R-@-S (S) Track/Surface Mounting Sockets P2RF-05-PU 57.5 Terminal Arrangement/ Internal Connection Diagram (Top View) 53.1 A2 30.8 28.1 (4.2) (1) Mounting Hole Dimensions A1 (5) 25.6 Two M3 screw holes or two 3.5-dia. holes 108 90 Release lever 35.3 12 (2) 14 (3) 27.35 11 (4) (4.2) 3.9 15.5 34.3 43 52.1 P2RF-08-PU Note: Pull out the hooks to mount the Socket with screws. Note: The numbers in parentheses are traditionally used terminal numbers. 25.6 57.
PAGE 8
G2R-@-S (S) P2RF-05-E 7±0.2 Five, M3.5´7 2 48 max. Terminal Arrangement (Top View) 4 (12) 39.5 3 35.5 85.5 max. Mounting Holes (for Surface Mounting) 3.2-dia. hole (11) 2 (14) 39.5±0.1 3.5-dia. hole M3 or 3.5-dia. hole 5 (A1) (A2) 4 1 11.5 61 max. 16.0 max. Note: Pin numbers in parentheses apply to DIN standard. P2RF-08-E 6 +0.2 −0.1 2 Terminal Arrangement (Top View) 2 1.5 Eight, M3´8 48.0 max. Mounting Holes (for Surface Mounting) 3 39.
PAGE 9
G2R-@-S (S) Mounting Height of Relay with Track/Surface Mounting Sockets P2RF-05-PU P2RF-08-PU G2R-@-S (S) Relay G2R-@-S (S) Relay P2RF-05ｰPU Socket P2RF-08ｰPU Socket 63.6 63.6 28.1 28.1 (3.9) (3.9) P2RF-@ P2RF-@-E G2R-@-S (S) Relay G2R-@-S (S) Relay P2RF-@-E Socket P2RF-@ Socket 67.0 70.5 66.5 62.0 Back-connecting Sockets P2R-05P (1-pole) 4 1 Terminal Arrangement (Bottom View) 14.5 max. 7 Mounting Holes Tolerance: ±0.1 4 6 4.5 6 35.5 max. 15 Five, 1.6-dia. holes 4.5 1.
PAGE 10
G2R-@-S (S) 4.5 P2R-05A (1-pole) 7.5 14.5 max. 1.2 0.3 Terminal Arrangement (Bottom View) 6.7 3.8 35.5 max. 5 16.7 Panel Cutout Five, 3 x 1.8-dia. holes 13.6±0.1 6 36.5 max. Terminal plate thickness: 0.3 30.5±0.2 6.5 7.5 P2R-08A (2-pole) 14.5 max. 1.2 0.3 5 5 35.5 max. Recommended thickness of the panel is 1.6 to 2.0 mm 20 2.6 2.8 1.5 Eight, 3 x 1.2-dia. holes 7.5 Terminal plate thickness: 0.3 P2R-057P (1-pole) 0.7 14 max. 8.7 36.5 max. 1 Terminal Arrangement (Bottom View) 16.
PAGE 11
G2R-@-S (S) Mounting Tracks PFP-100N, PFP-50N PFP-100N2 16 7.3±0.15 4.5 4.5 15 25 25 25 25 10 15 (5) 10 1,000 (500) 35±0.3 27 27±0.15 35±0.3 15 1 25 25 15 25 25 10 10 24 29.2 1 1.5 1,000 It is recommended to use a panel 1.6 to 2.0 mm thick. End Plate Spacer 10 6.2 PFP-M PFP-S 16 12 5 1.8 1 50 1.8 11.5 10 M4 x 8 pan head screw 35.5 35.3 34.8 44.3 1.3 4.8 16.5 Mounting Plate P2R-P 90 R2.25 10-Ellipse hole 4.5 13.6 3.4 49 42±0.1 30.5 18±0.15 18±0.15 18±0.
PAGE 12
OMRON Corporation Industrial Automation Company Authorized Distributor: Kyoto, JAPAN Contact: www.ia.omron.com Regional Headquarters OMRON EUROPE B.V. Wegalaan 67-69, 2132 JD Hoofddorp The Netherlands Tel: (31)2356-81-300/Fax: (31)2356-81-388 OMRON ELECTRONICS LLC 2895 Greenspoint Parkway, Suite 200 Hoffman Estates, IL 60169 U.S.A. Tel: (1) 847-843-7900/Fax: (1) 847-843-7787 OMRON ASIA PACIFIC PTE. LTD. No.