Datasheet

ManualsBrandsOmron Industrial Automation ManualsIndustrial RelaysIndustrial Relay G2RS, 1CO, 10A, Plug-In Terminal

General-purpose Relay G2RS G-5

Electromechanical

relays

General-purpose Relay

G2RS

Slim and Space-saving Power Plug-in Relay

• Lockable test button models now available.

• Built-in mechanical operation indicator.

• Provided with nameplate.

• AC type is equipped with a coil-disconnection self-diagnostic

function (LED type).

• High switching power (1-pole: 10 A).

• Environment-friendly (Cd, Pb free).

• Wide range of Sockets also available.

Model Number Structure

■ Model Number Legend

1. Relay Function

Blank: General-purpose

2. Number of Poles

1: 1 pole

2: 2 poles

3. Contact Form

Blank: SPDT

4. Contact Type

Blank: Single

5. Terminals

S: Plug-in

6. Classification

Blank: General-purpose

N: LED indicator

D: Diode

ND: LED indicator and diode

NI: LED indicator with test button

NDI: LED indicator and diode with test button

7. Rated Coil Voltage

Ordering Information

■ List of Models

G2R - - -

1234 56 7

Classification Enclosure

rating

Coil ratings Contact form

SPDT DPDT

Plug-in terminal General-purpose Unsealed AC/DC G2R-1-S G2R-2-S

LED indicator G2R-1-SN G2R-2-SN

LED indicator with test button G2R-1-SNI G2R-2-SNI

Diode DC G2R-1-SD G2R-2-SD

LED indicator and diode G2R-1-SND G2R-2-SND

LED indicator and diode with test button G2R-1-SNDI G2R-2-SNDI

Rated coil volta

Note: When ordering, add the rated coil voltage and "(S)" to the model number. Rated coil voltages are given in the coil ratings table.

Example: G2R-1-S 12 VDC (S)

New model

Summary of content (12 pages)

PAGE 1
General-purpose Relay G2RS Slim and Space-saving Power Plug-in Relay • Lockable test button models now available. • Built-in mechanical operation indicator. • Provided with nameplate. • AC type is equipped with a coil-disconnection self-diagnostic function (LED type). • High switching power (1-pole: 10 A). • Environment-friendly (Cd, Pb free). • Wide range of Sockets also available. LR Model Number Structure ■ Model Number Legend 1 2 3 4 5 6 7 Electromechanical relays G2R 5.
PAGE 2
■ Accessories (Order Separately) Connecting Sockets Applicable Relay model DIN-rail/surface-mounting Socket Screwless clamp terminal Back-mounting Socket Screw terminal Terminals Model 1 pole • P2RF-05S (See note.) + G2R-1-S(N)(D)(ND)(NI)(NDI) (P2CM-S (option)) • P2RF-05-E PCB terminals P2R-05P, P2R-057P • P2RF-05 Solder terminals P2R-05A 2 poles • P2RF-08S (See note.
PAGE 3
■ Contact Ratings Number of poles 1 pole Load Resistive load (cosφ = 1) Inductive load (cosφ = 0.4; L/R = 7 ms) Resistive load (cosφ = 1) 2 poles Inductive load (cosφ = 0.4; L/R = 7 ms) Rated load 10 A at 250 VAC; 10 A at 30 VDC 7.5 A at 250 VAC; 5 A at 30 VDC 5 A at 250 VAC; 5 A at 30 VDC 2 A at 250 VAC; 3 A at 30 VDC Rated carry current 10 A 5A Max. switching voltage 440 VAC, 125 VDC 380 VAC, 125 VDC Max. switching current 10 A Max.
PAGE 4
Engineering Data Maximum Switching Power Plug-in Relays G2R-2-S G2R-1-S 100 Switching current (A) AC inductive load (cosφ = 0.4) AC resistive load 10 DC resistive load DC inductive load (L/R = 7 ms) 1 0.1 1 10 100 Switching current (A) 100 AC resistive load DC resistive load 1 0.1 1000 AC inductive load (cosφ = 0.
PAGE 5
Technical and Environmental Properties Properties 1-Pole and 2 Pole Model DIN-railing Resistance Base 250 Environmental Protection RT 1 Flammability Class Base, Insulator, Spool Case, Indicator, Pushbutton Pollution degree 2 Creepage Distance 8 mm Clearance Distance 8 mm Contact Material AgSnIn UL 94V-0 UL 94V-2 Two-way action test button For momentary operation For lock operation 1 2 Pull down the test button to the first position, then press the yellow button with an insulated tool to
PAGE 6
Dimensions Note: All units are in millimeters unless otherwise indicated. Relays with Plug-in Terminals SPDT Relays G2R-1-S, G2R-1-SN, G2R-1-SNI G2R-1-SD, G2R-1-SND, G2R-1-SNDI Terminal Arrangement/Internal Connections (Bottom View) G2R-1-SD (DC) G2R-1-S 29 max. 1 13 max. 1 2 20 35.5 max. 5 4 3 G2R-1-SN, G2R-1-SNI (AC) 1 5 1 4.75 2 5 3 4 5 2 4 3 7.5 0.5 3 4 G2R-1-SN, G2R-1-SNI (DC) 1 DC 24V 2 5 G2R-1-SND, G2R-1-SNDI (DC) 5.2 5.2 17.
PAGE 7
DIN-rail/Surface Mounting Sockets 38.2 max. P2RF-05-S Terminal Arrangement (Top View) 36.5 max. 11 32.6 14 27.6 12 Option (with ejector and label attached) 92.0 max. Standard model 35.4 24.5 22.6 (5.3) 28.5 18.0 max. A1 A2 32.6 Terminal Arrangement (Top View) 38.2 max. P2RF-08-S 36.5 max. 21 11 27.6 Electromechanical relays 24 14 32.6 22 12 (3.4) Standard model 35.4 92.0 max. 24.5 22.6 A1 A2 Option (with ejector and label attached) (5.3) 28.6 18.0 max. 32.
PAGE 8
Terminal Arrangement (Top View) P2RF-05-E Five, M3.5×7 2 48 max. 4 (14) 39.5 3 35.5 85.5 max. Mounting Holes (for Surface Mounting) 3.2-dia. hole (11) 2 (12) 39.5±0.1 3.5-dia. hole M3 or 3.5-dia. hole 5 (A1) (A2) 1 11.5 61 max. 16.0 max. Note: Pin numbers in parentheses apply to DIN standard. P2RF-08-E 2 Terminal Arrangement (Top View) 2 1.5 Eight, M3×8 48.0 max. Mounting Holes (for Surface Mounting) 3 39.5 (21) (22) (24) 6 3 7 5 2 4 (11) (12) (14) 3.2-dia. hole 35.5 85.
PAGE 9
Mounting Height of Relay with DIN-rail/Surface Mounting Sockets P2RF-@-E P2RF-@ 62.0 66.5 70.5 67.0 P2RF-@-S 72.0 65.0 28.6 (5.30) P2R-05P (1-pole) 4 1 Terminal Arrangement (Bottom View) 14.5 max. 7 Electromechanical relays Back-connecting Sockets Mounting Holes Tolerance: ±0.1 4 6 4.5 6 35.5 max. 15 Five, 1.6-dia. holes 4.5 1.2 4 15 3.5 4 1.5 (5) 4 7 7 36.5 max. P2R-08P (2-pole) 4 0.3 14.5 max. 7 Mounting Holes Terminal Arrangement (Bottom View) 7.5 Eight, 1.3-dia.
PAGE 10
5 P2R-05A (1-pole) 7 14.5 max. 1.2 0.3 Terminal Arrangement (Bottom View) 6.7 3.8 35.5 max. 5 16.7 Panel Cutout Five, 3 x 1.8-dia. holes 13.6±0.1 6 36.5 max. Terminal plate thickness: 0.3 P2R-08A (2-pole) 7 30.5±0.2 7 14.5 max. 1.2 0.3 5 5 35.5 max. Recommended thickness of the panel is 1.6 to 2.0 mm 20 2.6 2.8 1.5 Eight, 3 x 1.2-dia. holes 7.5 Terminal plate thickness: 0.3 P2R-057P 14 max. 8.7 0.7 16.4 10.4 1 36.5 max. Terminal Arrangement (Bottom View) Mounting Holes Five, 1.
PAGE 11
Mounting DIN-rails PFP-100N, PFP-50N PFP-100N2 16 7.3±0.15 4.5 4.5 15 25 25 25 25 10 10 1,000 (500) 35±0.3 27 27±0.15 35±0.3 15 (5) 15 1 25 25 15 25 25 10 10 24 29.2 1 1.5 1,000 It is recommended to use a panel 1.6 to 2.0 mm thick. End Plate Spacer 10 6.2 PFP-M PFP-S 16 12 5 1.8 1 1.8 11.5 10 M4 x 8 pan head screw 35.5 35.3 34.8 44.3 1.3 4.8 16.5 Electromechanical relays 50 Precautions !Caution Do not use the test button for any purpose other than testing.
PAGE 12
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. J140-E2-01A G-16 In the interest of product improvement, specifications are subject to change without notice.