Datasheet

General-purpose Relay G2RS G-15
Electromechanical
relays
Mounting DIN-rails
End Plate Spacer
Precautions
!Caution
Do not use the test button for any purpose other than testing. Be
sure not to touch the test button accidentally as this will turn the
contacts ON. Before using the test button, confirm that circuits, the
load, and any other connected item will operate safely.
!Caution
Check that the test button is released before turning ON relay cir-
cuits.
!Caution
If the test button is pulled out too forcefully, it may bypass the mo-
mentary testing position and go straight into the locked position.
!Caution
Use an insulated tool when you operate the test button.
Precautions for P2RF-@-S Connection
• Do not move the screwdriver up, down, or from side to side while it
is inserted in the hole. Doing so may cause damage to internal
components (e.g., deformation of the clamp spring or cracks in the
housing) or cause deterioration of insulation.
• Do not insert the screwdriver at an angle. Doing so may break the
side of the socket and result in a short-circuit.
PFP-100N, PFP-50N PFP-100N2
4.5
15 25
25
25
25
10
10
1,000 (500)
7.3±0.15
35±0.3
27±0.15
1
4.5
15 25 25
25
25
15
10
10
1,000
35±0.3
27
24
16
29.
2
1 1.5
15 (5)
It is recommended to use a panel 1.6 to 2.0 mm thick.
PFP-M
PFP-S
50
11.5
10
6.2
1.8
1
35.5 35.3
1.8
1.3
4.8
5
16
12
44.3
34.8
10
16.5
M4 x 8 pan
head screw