Datasheet

G2RV-SR/G3RV-SR
30
G2RV-SR G3RV-SR
Common AccessoriesCommon Precautions
Dimensions (unit: mm)
Short Bars
Separate Plate
Parts for DIN Track Mounting
Refer to your OMRON website for details on the PFP-@.
Safety Precautions
When mounting a short bar
• Intermediate pins can be bent by a tool or by hand and cut off for use.
• The short bar can be cut to as many poles as needed. Insert the
tool from the plastic part side, and cut along the groove in the
plastic part between the terminals. When cutting, take care not to
break or deform the terminals.
However, because the metal on the cut surface will be exposed,
insulation countermeasures between adjacent products must be
ensured. Such countermeasures include widening the intervals
between products or using XW5Z-EP12 separate plates (order
separately).
Mounting a separate plate
• Use a flat-blade screwdriver to tighten the center top screw and
secure the plate. Loosen the screw to remove the plate from the
DIN rail.
(Except for PLC interface unit)
Common Accessories (order separately)
2
1.20
L
9
14
6.20
Note: Use the Short Bars for crossover wiring within one Socket or between Sockets.
* Replace the box (@) in the model number with the code for the covering color.
Pitch No. of poles L (Length) Colors Model *
Maximum carry
current
6.2 mm
2 12.4
Red (R)
Blue (S)
Yellow (Y)
PYDN-6.2-020@
32 A
3 18.6 PYDN-6.2-030@
4 24.8 PYDN-6.2-040@
10 62 PYDN-6.2-100@
20 124 PYDN-6.2-200@
PYDN-6.2-@@ (6.2 mm)
12
63
56
XW5Z-EP12
Precautions for Correct Use
Bend Cut off
Cut
M4 Screw