Datasheet

ManualsBrandsOmron Industrial Automation ManualsAutomationPulse Counter, 6 Digits, 100 ... 240VAC

CSM_H7HP_DS_E_5_2

Total Counter/Time Counter (DIN 72 x 36)

H7HP

DIN 72 x 36-mm Total Counter/Time Counter with

Easy-to-read Displays and Water and Oil

Resistance Equivalent to IP66

• Large, easy-to-read displays: 15-mm-high characters for 6-digit mod-

els; 12-mm-high characters for 8-digit models.

• High-visibility, negative transmissive LCD display with built-in red LED

backlight at low power consumption.

• IP66 with oil resistance and NEMA4 are achieved by unifying the front

with the casing case and using oil-resistant materials and parts.

• Compact (66 mm) body.

• Switch 6-digit models between total counter and time counter operation.

• Just change a switch setting for either an NPN or PNP input.

• Supports both external resetting and manual resetting.

• Finger-protection terminal block cover prevents electrical shock and

conforms to VDE0106, Part 100.

• Safety standards: UL, CSA, EMC (EN 61326), CE Marking.

Model Number Structure

■ Model Number Legend

1. Classification

A: Total counter/time counter

C: Total counter

2. Digits

None: 6 digits

8: 8 digits

3. Supply Voltage

None: 100 to 240 VAC

D: 12 to 24 VDC

4. Case Color

None: Light gray (Munsell 5Y7/1)

B: Black

Ordering Information

■ List of Models

For the most recent information on models that have been certified for

safety standards, refer to your OMRON website.

1 2 3 4

H7HP-@@@@

Supply voltage 6-digit total counter/time counter 8-digit total counter

Light gray Black Light gray Black

100 to 240 VAC H7HP-A H7HP-AB H7HP-C8 H7HP-C8B

12 to 24 VDC H7HP-AD H7HP-ADB H7HP-C8D H7HP-C8DB

Summary of content (10 pages)

PAGE 1
Total Counter/Time Counter (DIN 72 x 36) H7HP CSM_H7HP_DS_E_5_2 DIN 72 x 36-mm Total Counter/Time Counter with Easy-to-read Displays and Water and Oil Resistance Equivalent to IP66 • Large, easy-to-read displays: 15-mm-high characters for 6-digit models; 12-mm-high characters for 8-digit models. • High-visibility, negative transmissive LCD display with built-in red LED backlight at low power consumption.
PAGE 2
H7HP Specifications ■ Ratings Item 6-digit total counter/time counter H7HP-A 8-digit total counter H7HP-AD H7HP-C8 H7HP-C8D Rated supply voltage 100 to 240 VAC (50/60 Hz) 12 to 24 VDC (see note 1) 100 to 240 VAC (50/60 Hz) 12 to 24 VDC (see note 1) External power supply 50 mA at 12 VDC Operating voltage range 85% to 110% of rated supply voltage Power consumption 100 to 240 VAC: 6.5 VA max. 12 to 24 VDC: 0.6 W max.
PAGE 3
H7HP ■ Characteristics Insulation resistance 100 MΩ min.
PAGE 4
H7HP Connections ■ Terminal Arrangement Note: 1. Incremented for count 1 (CP1) inputs; decremented for count 2 (CP2) inputs. 2. Non-contact input is also available. AC Models H7HP-A H7HP-C8 External power supply 12 VDC 50 mA max. 100 to 240 VAC Power supply Power supply 5 Unused Unused Unused 6 7 8 9 1 2 3 4 Key protection input Reset input External power supply 12 VDC 50 mA max.
PAGE 5
H7HP ■ Operating Modes Total Counters Reset input CP1 CP2 999999 (see note) Display 0 −99999 (see note) display Note: Display values are shown for a 6-digit model. The count value will return to "0" when "999999" is exceeded. The display and output are turned OFF when the power supply turns OFF, but the count value is stored internally. Time Counters Reset input Gate input Start input 99999.9h * Display 0.0 h * Display values are shown for full scale set to 99999.9 h.
PAGE 6
H7HP Dimensions Note: All units are in millimeters unless otherwise indicated. H7HP-A H7HP-C8 M3.5 terminal screw Terminal cover (provided) Panel Cutouts Panel cutouts are as shown below (according to DIN43700). Note: 1. The mounting panel thickness should be 1 to 6 mm. 2. Water resistance will be lost if Counters are mounted side-by-side.
PAGE 7
H7HP Connections (Common) ■ Input Connections Note: The following is common for all H7GP/H7HP models.
PAGE 8
H7HP Safety Precautions (Common) Refer to Safety Precautions for All Counters. Note: The following is common for all H7GP/H7HP models. !CAUTION This may occasionally cause electric shock, fire, or malfunction. Never disassemble, repair, or modify the H7GP/H7HP. This may occasionally cause electric shock, fire, or malfunction. Do not allow metal fragments or lead wire scraps to fall inside the H7GP/H7HP.
PAGE 9
H7HP ■ Precaution for Correct Use Power Supplies When turning the power ON and OFF, input signal reception is possible, unstable, or impossible as shown in the diagram below. Apply the power supply voltage through a relay or switch in such a way that the voltage reaches a fixed value immediately. Power supply ON OFF Input 200 ms 0 to 90 ms 5 ms Impossible 0 to 2 s Possible Unstable Impossible Unstable Self-diagnostic Function The following displays will appear if an error occurs.
PAGE 10
Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron).